PSF100A-0.5 ETC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 2

Technical content

Page <1> 17/05/12 V1.1 www.element14.com www.farnell.com www.newark.com Features:

  • Patented shock and vibration resistance
  • Miniature size, lightweight, low cost
  • Quick response time
  • Dependable long life (20+ million cycles)
  • Gold contact points (dual)
  • Rugged military standards (MIL-SPEC) Dimensions : Inches (Millimetres) Description: The rugged yet ultra-sensitive PSF100A pressure switch incorporates a patented dual diaphragm/dual contact design offering protection against false actuation due to shock and vibration Specifications: Mechanical Standard Tolerance : ±20% (tighter tolerances available) Switch Type : SPST normally open, double-make / double-break Switching Medium : Air, compatible fluids on “High” side Mechanical Life : More than 20 million cycles

Page <2> 17/05/12 V1.1 www.element14.com www.farnell.com www.newark.com Proof Pressure : 8 psi : for units where set point is 3 inches H 2O or less 15 psi : for units where set point is greater than 3 inches H 2O 8 psi : for units with Teflon diaphragm Shock and vibration : At zero pressure, will not make at 50 G’s shock, will not make at 10 G’s, 50 to 2,000 Hz vibration Operating Temperature : +40°F to +150°F (standard), -46°F to +205°F (contact us) Physical Case Material : Polycarbonate (other materials available) Porting Options : Two 200 inches diameter barbed ports (low / high) for use with 1/8 inches to 3/16 inches ID tubing Diaphragm Material : Polyurethane (Teflon  optional) Contact Points : Gold (dual) Electrical Connections : Terminals - 0.187 inches × 0.02 inches tab-type, for use with quick disconnects (reference AMP 2-520182-2 or equivalent) Mounting : Eyeleted for #2 screws; mounting clip or bracket available Weight : Less than 10 g Electrical Current Rating : 40 mA resistive for life in excess of 20 million cycles Operating Voltage : 30 V ac / dc or less with resistive load; 120 V ac neon lamp load Note : For high load capabilities contact design flex for our SRF solid state relay Specification Table Description Inches H2O mbar psi Part Number Pressure switch, 0.108 psi 3 7.46 0.108 PSF100A-3.0 Pressure switch, 0.217 psi 6 14.92 0.217 PSF100A-6.0 Pressure switch, 0.361 psi 10 24.86 0.361 PSF100A-10.0 Pressure switch, 0.541 psi 15 37.3 0.541 PSF100A-15.0 Pressure switch, 1.804 psi 50 124.32 1.804 PSF100A-50.0 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.