PSA-12 ETC2
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
- 12V dc power supply delivers up to 3.5 amps to power Banner 12V continuous LED lights
- Choose model with 120V ac North American power cord, or with 220V ac Euro power cord
- Includes pre-wired 9-pin D-sub connector for direct connection to LED lights
- Tough ABS housing Environmental Rating IEC IP20; NEMA 1 Operating Conditions Temperature:0° to 50°C (+32° to 122°F) Maximum relative humidity: 95% at 40°C (non-condensing) Models Input Input Cord Output Output Cable Used with PSA-12E PSA-12 100-250V ac 50/60 Hz
1.1 A max @
(NEMA 5-15) 12V dc ±5% with voltage regulation of ±1% 3.5 A max. 1.8 m (6') Terminated with 9-pin D-sub connector (female pins) Continuous LED lights Cont. Europe (Schuko CEE 7) Connections Pin 1 = +V Pin 2 = dc common Pin 3 = dc common Pin 4 = +V Pin 5 = +V Models Length Configuration DB910† 3.0 m (10') DB906† 1.8 m (6') Terminated both ends with 9-pin D-sub connector, for continuous lights (one end male pins and opposite end female pins) DB9Y† 1.8 m (6') Y cable for powering 2 lights from one supply, for continuous lights † These models are not stocked and are non-returnable.