PS9114 ETC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

FEATURES

  • HIGH COMMON MODE TRANSIENT IMMUNITY CMH, CML = ±20 kV/µs TYP
  • SMALL PACKAGE 5-pin SOP
  • HIGH SPEED

10 Mbps

  • PULSE WIDTH DISTORTION |tPHL – tPLH| = 3 ns TYP
  • HIGH ISOLATION VOLTAGE BV = 2500 Vr.m.s.
  • OPEN COLLECTOR OUTPUT
  • AVAILABLE IN TAPE AND REEL PS9114-F3, F4: 2500 pcs/reel

DESCRIPTION

NEC's PS9114 is an optically coupled high-speed, isolator containing a GaAIAs LED on the input side and a photodiode and a signal processing circuit on the output side on one chip. PS9114 NEC's HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER

APPLICATIONS

  • FACTORY AUTOMATION NETWORK
  • MEASUREMENT EQUIPMENT
  • MOTOR DRIVE / INVERTER California Eastern Laboratories ELECTRICAL CHARACTERISTICS (TA = 0 to +85°C, Unless otherwise specified) PART NUMBER PS9114 SYMBOL PARAMETERS UNITS MIN TYP 1 MAX VF Forward Voltage, IF = 10 mA, TA = 25°CV 1.4 1.65 1.9 IR Reverse Current, VR = 3 V, TA = 25°C µA1 0 Ct Capacitance, V = 0, f = 1 MHz, TA = 25°Cp F 3 0 IOH High Level Output Current µA 0.02 250 Vcc = VO = 5.5 V, VF = 0.8 V VOL Low Level Output Voltage2 V 0.15 0.6 Vcc = 5.5 V, IF = 5 mA, IOL = 13 mA ICCH High Level Supply Current, VCC = 5.5 V, IF = 0 mA mA 3 8 ICCL Low Level Supply Current, VCC = 5.5 V, IF = 10 mA mA 7.0 11 IFHL Threshhold Input Current, High → Low, VCC = 5 V, VO = 0.8V, mA 2 5 RL = 350 Ω RI-O Isolation Resistance, VI-O = 1 k VDC, RH = 40 to 60%, TA = 25°C Ω 1011 CI-O Isolation Capacitance, V = 0, f = 1 MHz, TA = 25°Cp F 0.6 tPHL Propagation Delay Time3, High → Low TA = 25°Cn s 5 4 7 5 VCC = 5 V, RL = 350 Ω, IF = 7.5 mA 100 tPLH Propagation Delay Time3, Low → High TA = 25°Cn s 5 1 7 5 VCC = 5 V, RL = 350 Ω, IF = 7.5 mA 100 tr Rise Time, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA mA 20 tf Fall Time, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA mA 10 Diode Detector Coupled Continued on next page

ELECTRICAL CHARACTERISTICS (TA = 0 to +85°C, Unless otherwise specified), Continued PART NUMBER PS9114 SYMBOL PARAMETERS UNITS MIN TYP MAX | tPHL – tPLH | Pulse Width Distortion, (PWD)3, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA ns 3 50 tPSK Propagation Delay Skew, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA ns 60 CMH Common Mode Transient Immunity at High Level Output4, kV/µs1 0 2 0 VCC = 5 V, TA = 25°C, IF = 0 mA, VO (MIN) = 2 V, VCM = 1 kV CML Common Mode Transient Immunity at Low Level Output4, kV/µs1 0 2 0 VCC = 5 V, TA = 25°C, IF = 7.5 mA, VO (MAX) = 0.8 V, VCM = 1 kV Coupled Notes: 1. Typical values at T A = 25°C. 2. Because V OL of 2 V or more may be output when LED current input and when output supply of VCC = 2.6 V or less, it is important to confirm the characteristics (operation with the power supply on and off) during design, before using this device.. 3. Test Circuit for Propagation delay time 4.Test Circuit for common mode transient immunity Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Applies to output pin Vo. Reduced to 1.5 mW/ °C at TA = 65°C or more. 3. AC voltage for 1 minute at TA = 25 °C, RH = 60% between input and output. USAGE CAUTIONS 1. This device is ESD sensitive. 2. Bypass capacitor of more than 0.1 µF must be used between V CC and GND within 10 mm of the device. Pulse input (IF) 47 Ω (PW = 1 s, Duty cycle = 1/10) µ RL = 350 Ω VO (Monitor) VCC = 5 V Input (Monitor) 0.1 Fµ CL = 15 pF Input Output tPHL tPLH (IF = 7.5 mA) 50% 1.5 V VOL 90% 10% 1 kV VOH 0 V 2 V 0.8 V VOL VCM tr tf VO (IF = 0 mA) VO (IF = 7.5 mA) RL = 350 Ω CL = 15 pF VO (Monitor) VCC = 5 V 0.1 Fµ VCM SW I F ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS Diode IF Forward Current mA 30 VR Reverse Voltage V 5 Detector VCC Supply Voltage V 7 VO Output Voltage V 7 IO Output Current mA 25 PC Power Dissipation2 mW 40 Coupled BV Isolation Voltage 3 Vr.m.s. 2500 TA Operating Temperature °C -40 to +85 TSTG Storage Temperature °C -55 to +125 RECOMMENDED OPERATING CONDITIONS PART NUMBER PS9114 SYMBOLS PARAMETERS UNITS MIN TYP MAX VFL Low Level Input Voltage mA 0 0.8 IFH High Level Input Current mA 6.3 10 12.5 VCC Supply Voltage V 4.5 5.0 5.5 N TTL(RL = 1kΩ loads) 5 RL Operating Temperature Ω 300 4 k Remark CL includes probe and stray wiring capacitance. PART PACKAGE PACKAGE APPLIICATION NUMBER STYLE PART NUMBER* PS9114 5-pin SOP Magazine case PS9114

100 PCS

ORDERING INFORMATION

  • For the application of the Safety Standard, following part number should be used.

TYPICAL PERFORMANCE CURVES (TA = 25°C) PS9114 MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE Maximum Forward Current, I F (mA) Ambient Temperature, TA (ºC) DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Detector Power Dissipation, P C (mW) Ambient Temperature, TA (ºC) SUPPLY CURRENT vs. AMBIENT TEMPERATURE High Level Supply Current, I CCH (µA), Low Level Supply Current, I CCL (µA) Ambient Temperature, TA (ºC) FORWARD CURRENT vs. FORWARD VOLTAGE Forward Current, I F (mA) Forward Voltage, VF (V) LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE Low Level Output Voltage, V OL (V) Ambient Temperature, TA (ºC) OUTPUT VOLTAGE vs. INPUT CURRENT Output Voltage, V O (V) Input Current, IF (mA) 20 40 60 80 1000 20 40 60 80 1000 1.0 0.01 0.1 100 TA = +85ºC +50ºC +25ºC 0ºC -25ºC -50 -25 0 25 50 75 100 ICCL (IF = 10 mA) ICCH (IF = 0 mA) 123456 RL = 350 Ω VCC = 5.0 V, TA = 25ºC 1.0 kΩ 4.0 kΩ, 4.7 kΩ -50 -25 0 25 50 75 100 IF = 5.0 mA, VCC = 5.5 V 0.6 0.5 0.4 0.3 0.2 0.1 13.0 mA 10.0 mA 6.0 mA IOL = 16.0 mA

TYPICAL PERFORMANCE CURVES (TA = 25°C) PS9114 THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE Threshold Input Current, I FHL (mA) Ambient Temperature, TA (ºC) PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE Propagation Delay Time, t PHL, tPLH (ns) Ambient Temperature, TA (ºC) PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE Pulse Width Distortion | t PHL – t PLH | (ns) Ambient Temperature, TA (ºC) PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. FORWARD CURRENT Propagation Delay Time, t PHL, tPLH (ns) Ambient Temperature, TA (ºC) PROPAGATION DELAY TIME vs. INPUT CURRENT Propagation Delay Time, t PHL, tPLH (ns) Input Current, IF (mA) SWITCHING TIME vs. AMBIENT TEMPERATURE Switching Time, t r, tf (ns) Ambient Temperature, TA (ºC) VCC = 5.0 V, VO = 0.6 V 2.5 2.0 1.5 1.0 0.5 -50 -25 0 25 50 75 100 1.0 kΩ RL = 350 Ω 4.7 kΩ, 4.0 kΩ 100 -50 -25 0 25 50 75 100 IF = 7.5 mA, VCC = 5.0 V tPHL: RL = 350 Ω, 1.0 kΩ tPLH: RL = 1.0 kΩ tPLH: RL = 350 Ω 120 100 -50 -25 0 25 50 75 100 I F = 7.5 mA, VCC = 5.0 V tPLH: RL = 4.7 kΩ tPHL: RL = 4.7 kΩ tPHL: RL = 4.0 kΩ tPLH: RL = 4.0 kΩ -50 -25 0 25 4.0 kΩ 50 75 100 IF = 7.5 mA, VCC = 5.0 V RL = 4.7 kΩ RL = 350 Ω 1.0 kΩ -50 -25 0 25 50 75 100 IF = 7.5 mA, VCC = 5.0 V 400 300 200 100 tr: RL = 4.0 kΩ, 4.7 kΩ tr: RL = 1.0 kΩ tr: RL = 350 Ω tf: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ, 4.7 kΩ 151311975 VCC = 5.0 V, TA = 25ºC 120 100 tPLH: RL = 4.0 kΩ tPLH: RL = 1.0 kΩ tPHL: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ tPLH: RL = 350 Ω

OUTLINE DIMENSIONS (Units in mm) PS9114 MARKING 1.27 0.4+0.10 -0.05 0.25 M 0.1±0.1 2.6±0.2 4.4 7.0±0.3 0.5±0.3 0.15+0.10 -0.05 TOP VIEW 3.4 +0.3 -0.1 1. Anode 2. Cathode 3. GND 4. V O 5. VCC A Business Partner of NEC Compound Semiconductor Devices, Ltd. 09/10/2003 Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. No. 1 pin Mark Initial of NEC (Engraved mark) 9114 N234 Rank Code Year Assembled (Last 1 Digit) Week Assembled N 2 34 Assembly Lot N