PS1102HA ETC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Features
Package 2125 Type, Water clear epoxy Half Intensity Angle Rank grouping parameter Soldering methods ESD Reflow soldering, and manual soldering ※Please refer to Soldering Conditions about soldering. 2kV (HBM) Sorted by photo current per rank taping Assembly method Auto pick & place machine (Auto Mounter) Taping and reel 4,000pcs per reel in a 8mm width tape. (Standard) Reel diameter:φ180mm
2004.11.17 PS1102HA Surface Mount Phototransistor/2125 Type Abs olute Ma ximum R a tings Item Symbo l Unit Collector Dissipation Pc mW Collector-Emitter Voltage V CEO V Emitter-Collector Voltage V ECO V Collector Current Ic mA O perating Temperature T opr ˆ Storage Temperature T st g ˆ Electro-O ptical Characteristics Min . 0. 4 m A TYP. 2 mA Response Time tr/ tf TYP. 8/ 9 μs Da rk Curre nt I CEO Ma x . 0. 1 μA Peak S ensitivity Wavelength λp TYP . 880 nm 130(θx) 135(θy) ˞1 Color temperature is 2,856K. Employs a standard tungsten lamp. Abs olute Maximum Ratings IcVCE =5V, Ee=5mW/ cm 2 ※1 Conditions -30ʙ+85 -40ʙ+90 VCE =10V, Ic=2mA, RL =100Ω VCEO =10V VCE =5V Photo Current CharacteristicsItem UnitSymbol deg.S patial Half Width V CE =5V ⊿θ TYP. (Ta=25℃) (Ta=25℃)
2004.11.17 Photo Current Rank (Ta=25℃) ※Please contact our sales staff concerning rank designation. MIN. MA X . A0 . 4 0 . 8 B0 . 7 1 . 4 C1 . 2 2 . 4 D2 . 1 4 . 2 E3 . 6 7 . 2 Ic (mA) V CE = 5V Ee = 5 m W / cm2 ConditionRank PS1102HA Surface Mount Phototransistor/2125 Type
2004.11.17 Technical Data Spatial Distribution Example Condition : Ta = 25ˆ PS1102HA Surface Mount Phototransistor/2125 Type Relative Sensitivity vs. Sensitivity Wavelength Condition : Ta = 25ˆ, VCE = 5V Sensitivity Wavelength [nm] Relative Sensitivity Radiation Luminance vs. Relative Photo Current Condition : Ta = 25ˆ, VCE = 5V Radiation Luminance Ee(mW/cm2) Relative Photo Current Ic It is based on Ee=5mW/cm2. Employs a standard tungsten lamp of 2,856K. Collector-Emitter Voltage vs. Photo Current Condition : Ta = 25ˆ Collector-Emitter Voltage VCE(V) Photo Current Ic (mA) Employs a standard tungsten lamp of 2,856K.
2004.11.17 Technical Data Response Time Measuring Circuit Ambient Temperature vs. Collector Dissipation Ambient Temperature : Ta(ˆ) Ambient Temperature vs. Dark Current Condition : VCEO = 10V Ambient Temperature : Ta(ˆ) Dark Current : ICEO(nA) Load Resistance vs. Response Time Condition : VCE=10V, Ic=2mA, Ta=25ˆ Load Resistance : RL(Њ) Response Time (Жs) Collector Dissipation : Pc(mW) PS1102HA Surface Mount Phototransistor/2125 Type
2004.11.17 Technical Data Ambient Temperature vs. Relative Photo Current Condition : VCE = 5V Ambient Temperature : Ta(ˆ) Relative Photo Current Ic (mA) PS1102HA Surface Mount Phototransistor/2125 Type
Recommended Soldering Pattern (Unit: mm) Taping Specification (Unit: mm) (Unit: mm) Quantity: 4,000pcs/ reel (standard) Weight: (2.84)mg 2004.11.17 PS1102HA Surface Mount Phototransistor/2125 Type
Reflow Soldering Conditions Manual Soldering Conditions Iron tip temp. Soldering time and frequency 3 s 1 time 350 ˆ (MAX.) (MAX.) (MAX.) (30 W Max.) PS1102HA Surface Mount Phototransistor/2125 Type 2005.1.7 1) The above profile temperature gives the maximum temperature of the device resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the device from absorbing moisture. 3) Temperature fluctuation to the device during the pre-heating process shall be minimized.
2004.11.17 Page 9
Reliability Testing Result Reliability Testing Result Applicable Standard Duration Failure Room Temp. Operating Life EIAJ ED- 4701/100(101) 1,000 h 0/16 (Pretreatment) Individual standard (Reflow Soldering) Pre-heating 150℃ 120s →Operating Heating 240℃ 5s (Pretreatment) Individual standard (Reflow Soldering) Pre-heating 180℃ 120s →Operating Heating 260℃ 5s Temperature Cycling EIAJ ED- 4701/100(105) 5 cycles 0/16 Wet High Temp. Storage Life EIAJ ED- 4701/100(103) 1,000 h 0/16 High Temp. Storage Life EIAJ ED- 4701/200(201) 1,000 h 0/16 Low Temp. Storage Life EIAJ ED- 4701/200(202) 1,000 h 0/16 Vibration, Variable Frequency EIAJ ED- 4701/400(403) 2 h 0/16 Ta = Maximum Rated Storage Temperature Ta = Minimum Rated Storage Temperature 98.1m/s (10G), 100 ～ 2KHz sweep for 20min., XYZ each direction Testing Conditions Ta = 25℃, Pc = Maxium Rated Power Dissipation Minimum Rated Storage Temperature(30min) ～Normal Temperature(15min) ～Maximum Rated Storage Temperature(30min) ～Normal Temperature(15min) Resistance to Soldering Heat EIAJ ED- 4701/300(301) Failure Criteria Items Symbols Conditions Failure criteria Photo Current I C EE Value of each product Radiant Intensity of Photo Current VCE Value of each product Collector-emitter Voltage of Photo Current Testing Max. Value ≧Initial Value x 1.3 Testing Min. Value ≦ Initial Value x 0.7 Dark Current I CEO VCEO Value of each product Collector-emitter Voltage of Dark Current Testing Max. Value ≧ Spec. Max. Value x 1.2 Cosmetic Appearance - - No notable, decoloration, deformation and cracking PS1102HA Surface Mount Phototransistor/2125 Type
Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products described in the data sheets are made to be used in standard electronic applications such as office automation appliances, communication devices, audio visual, home appliances, and measuring instruments. 5) If the products in the data sheets are to be used for purposes other than the above which requires high level reliability and safety where failure and or malfunction of the product may cause death or other serious effects on the human body such as airplane, space activity, transportation, medical, nuclear), please contact our sales personnel. 6) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 7) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 8) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com Page 102004.11.17 PS1102HA Surface Mount Phototransistor/2125 Type