PLT5-510 OSRAM

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • Optical output power (continuous wave): 10 mW (Tcase = 25 °C)
  • Typical emission wavelength: 515 nm
  • Efficient radiation source for cw and pulsed operation
  • Single transverse mode semiconductor laser
  • High modulation bandwidth
  • TO56 package with photo diode

Applications

  • Laser projection
  • Laser shows
  • Presenter
  • Biomedical Applications
  • Metrology Safety Advice Depending on the mode of operation, these devices emit highly concentrated visible light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions found in IEC 60825-1 “Safety of laser products”.

04.04.2016 2 Version 1.1 PLT5 510

Ordering Information

Operation outside these conditions may damage the device. Operation at the maximum ratings influences lifetime. Laser Characteristics (Tcase = 25 °C) Type: Optical Output Power Ordering Code Popt (Tcase = 25°C) PLT5 510_B1-3 10 mW Q65111A6310 Parameter Symbol Values Unit min. max. Operating Current IF 120 mA Operating Temperature Tcase -20 +60 °C Storage Temperature Tstg -40 +85 °C Reverse Voltage VR 2V Soldering Temperature max. 10 sec. Tsolder 260 °C Junction temperature Tj 120 °C Parameter Symbol Values Unit min. typ. max. Emission Wavelength 1) 1) Standard operating conditions refer to a continuous wave output power of Popt = 10 mW. 2) Photo current refers to a reverse voltage of VR = 5 V. λ peak 510 515 520 515 520 530 nm Spectral Width (FWHM) 1) Δλ –2– n m Threshold Current Ith –3 0 6 0 m A Operating Current 1) IF – 60 100 mA Operating Voltage 1) VF –5 . 4 7 . 0 V Beam Divergence (FWHM) 1) θ∥ x 5 x 6.6 x 21.4 9 x deg Polarization 1) Pgr – 100:1 – Modulation Frequency f – >100 – MHz Thermal resistance (junction to case) Rth –3 4– K / W Monitor current 1) 2) Im – 150 – µA

Version 1.1 PLT5 510 04.04.2016 3 Optical Output Power Popt = ƒ (IF) Operating Voltage VF = ƒ (IF) Threshold Current Ith = ƒ (Tcase) Spectra (B2) Popt = ƒ (λ) 0 2 04 06 08 0 1 0 0 Popt [mW] IF [mA] Tcase =2 0° C Tcase =6 0° C Tcase =4 0° C Tcase =0° C 0 2 04 06 08 0 1 0 0 VF [V] IF [mA] Tcase =6 0° C Tcase =4 0° C Tcase =2 0° C Tcase =0° C 0 2 04 06 0 Ith [mA] Tcase [°C] 514 516 518 520 522 0.0 0.2 0.4 0.6 0.8 1.0 Tcase =6 0° C Tcase =4 0° C Tcase =2 0° C Popt [a. u.] /s61548 [nm]

04.04.2016 4 Version 1.1 PLT5 510 Beam Divergence Popt = ƒ (θ), Tcase = 25 °C -40 -20 0 20 40 0.0 0.2 0.4 0.6 0.8 1.0 Popt [a. u.] /s61553 [deg] /s61553 || /s61553 ⊥

Version 1.1 PLT5 510 04.04.2016 5 Package Outline Dimensions in mm Pin Connection PD LD

3 Pin 1: LD Cathode

Pin 2: LD Anode, PD Cathode (case) Pin 3: PD Anode

04.04.2016 6 Version 1.1 PLT5 510 Disclaimer OSRAM OS assumes no liability whatsoever for any use of this document or its content by recipient including, but not limited to, for any design in activities based on this preliminary draft version. OSRAM OS may e. g. decide at its sole discretion to stop developing and/or finalizing the underlying design at any time. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserv ed. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing materi al back, if it is sorted. You must be ar the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-suppo rt devices** or systems with the express written approval of OSRAM OS. *) A critical component is a componen t used in a life-su pport device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body , or (b) to support and/or maintain and sustain human life. If they fa il, it is reasonable to assume that the health and the life of the user may be endangered. Important notes of operation for laser diode a) Electrical operation OSRAMs laser diodes are designed for maximum performance and reliability. Operating the laser diode above the maximum rating even for very short periods of time can damage the laser diode or reduce its lifetime. The laser diode must be operated with a suitable power supply with minimized electrical noise. The laser diode is very sensitive to electrostatic discharge (ESD). Proper precautions must be taken. b) Mounting instructions In order to maintain the lifetime of the laser diode proper heat management is essential. Due to the design of the laser diode heat is dissipated only through the base plate of the diode‘s body. A proper heat conducting interconnection between the diodes base plate and the heat sink must be maintained.

Version 1.1 PLT5 510 04.04.2016 7 Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved. Eu RoHS compliant product