PESD0402AV05 LEIDITECH
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
Applications
RoHS Compliant Halogen Free Halogen Free Materials Information PESD0542AV05 Surface Mount Polymeric ESD Suppressor Rev : www.leiditech.com 01.06.2015 1/7
Parameter Symbol Test Conditions Min. Typ. Max. Units Continuous Operating Voltage VDC --- --- --- 5 V Trigger Voltage VT IEC61000-4-2 8KV contact discharge --- 450 --- V Clamping Voltage VC IEC61000-4-2 8KV contact discharge --- 40 --- V Leakage Current IL DC 5V shall be applied on component --- --- 10 nA Capacitance CP Measured at 10MHz --- 0.05 --- pF ESD Pulse Withstand Pulses IEC61000-4-2 8KV contact discharge 1000 --- --- --- Notes: Trigger and clamping voltage are measured per IEC 61000-4-2, 8KV contact discharge method. Solder Heat Solderability Preconditioning Thermal Shock Bias Humidity Test Test Conditions 1. 150℃, 4H; 2. 260℃,10s,1 Times 245℃, 5s 1. 125℃, 24H; 3. 260℃ Reflow,3 Times -55℃—125℃, 30min dwell, 1000cycles 85℃, 85%RH, VDC, 1000H Pass/Fail Criteria 90% Coverage 95% Coverage IL≤10nA IL≤10nA IL≤10nA Bias Heat Test Bias Low Temp Test Vibration Mechanical Shock Solvent Resistance Test Conditions 125℃, VDC, 1000H -55℃, VDC, 1000H 10Hz-50Hz-10HZ, 2hrs each in X-Y-Z axis 1500G, 0.5ms, X-Y-Z axis 3 times IPA, ultrasonic 300s Pass/Fail Criteria IL≤10nA IL≤10nA No Physical Damage IL≤10nA No Physical Damage IL≤10nA No Physical Damage IL≤10nA Electrical Characteristics（TA =25° C） Environmental Specifications Rev : www.leiditech.com 01.06.2015 2/7 PESD0542AV05
-50 100 150 200 250 300 350 400 450 0 10 20 30 40 50 60 70 80 90 Voltage ( V ) Time（ns） 0.01 0.02 0.03 0.04 0.05 0.06 Capacitance(pF) Frequency(Hz) Typical Device Capacitance VS. Frequency Typical ESD Response （IEC 61000-4-2, 8KV contact discharge Rev : www.leiditech.com 01.06.2015 3/7 PESD0542AV05
The PESD is designed for the protection of one bidirectional data line from ESD damage. Place the PESD as close to the input terminal or connector as possible. Minimize the path length between the PESD and the protected signal line. Use ground planes whenever possible. GND Signal line to be protected ESD Protection for Signal Line Eye Diagram Measurement USB3.0 Mask at 5.0 Gbps HDMI Mask at 3.4 Gbps S USB 3.0 Host/Controller Vbus GND RX- RX+ GND TX- TX+ USB Port Rev : www.leiditech.com 01.06.2015 4/7 PESD0542AV05
- Tape Dimension Unit: Millimeters *Sizes in mm L W P H L W P H Package outline 0.65 0.50 0.90 Dimension Unit: Millimeters Min. Typ. Max. L 0.90 1.00 1.10 W 0.42 0.52 0.62 P 0.15 0.25 0.35 H 0.25 0.38 0.45 Recommended Solder Pad Footprint Package Dimension Taping Specification Packaging 10,000 pieces in paper tape on 7'' (178mm) reel Rev : www.leiditech.com 01.06.2015 5/7 PESD0542AV05
- Reel Dimension Unit: Millimeters A C N A N Min. C W2 Max. W1 Min. W1 Max. Rev : www.leiditech.com 01.06.2015 6/7 PESD0542AV05
Profile Feature Pb-Free Assembly Pre Heat Temperature Min (Tsmin) Temperature Max (Tsmax) Time (ts) from (Tsmin to Tsmax) 150 ° C 200 ° C 60-120 seconds Ramp-up Rate (TL to Tp) 3 ° C/second max. Liquidus temperature (TL) Time (tL) maintained above TL 217 ° C 60-150 seconds Peak package body temperature (Tp) 260+0/-5 °C Time (tp)* within 5 ° C of the specified classification temperature (Tc) 30* seconds Ramp-down Rate (Tp to TL) 6 ° C/second max. Time 25 ° C to peak temperature 8 minutes max. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. Soldering Parameters Rev : www.leiditech.com 01.06.2015 7/7 Shanghai Leiditech Electronic Co.,Ltd Email: sale1@leiditech.com Tel : +86- 021 50828806 Fax : +86- 021 50477059 PESD0542AV05