PDL02-05S05 ETC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Voltage accuracy Full load and nominal Vin ± 2% Minimum load (Note 1) 25% of FL Line regulation LL to HL at Full Load ± 0.5% Load regulation 25% to 100% FL ± 0.75% Ripple and noise 20MHz bandwidth 50mVp-p Temperature coefficient /G730.1% / ºC, max Transient response recovery time 25% load step change 500uS typ Short circuit protection Continuous, automatics recovery INPUT SPECIFICATIONS Input voltage range 5V nominal input 12V nominal input 24V nominal input 48V nominal input 4.5 – 9VDC 9 – 18VDC 18 – 36VDC 36 – 75VDC Input filter Capacitor type Input surge voltage 100mS max 5V input 12V input 24V input 48V input 15VDC 36VDC 50VDC 100VDC Reflected repple current There is an external capacitor at input (Note 2) 5V input (100uF) 12V input (100uF) 24V input (10uF) 48V input (10uF) 400mAp-p max 150mAp-p max 380mAp-p max 170mAp-p max Start up time Nominal Vin and constant resistor load 1mS typ Remote ON/OFF Remote off input current DC-DC ON DC-DC OFF Nominal input Open or high impedance Control pin applied current 3 ~ 6mA max(via 1K /G2d6) 1mA max Application circuit GENERAL SPECIFICATIONS Efficiency See table Isolation voltage 1000VDC, min Isolation resistance 109ohms, min Isolation capacitance 300pF, max Safety standard pending IEC60950, UL60950, EN60950 Switching frequency Full load to minimum load 100 to 650KHz Case material Non-conductive black plastic Base material None Potting material Silicon (UL94-V0) Dimensions 0.86 X 0.36 X 0.44 Inch (21.8 X 9.2 X 11.1 mm) Weight 4.8g (0.17oz) MTBF (Note 3) 5.107 x 10 6 hrs ENVIRONMENTAL SPECIFICATIONS Operating temperature range -40ºC to +85ºC Storage temperature range -55ºC to +105ºC Cooling Nature convection Thermal shock MIL-STD-810D Vibration 10~55Hz, 2G, 30minutes along X,Y and Z Relative humidity 5% to 95% RH EMC CHARACTERISTICS Meet EN55022 classes B recommend circuit with external L-C filter at input (Note 5V input 12V input 24V input 48V input 100uF & 10uH 100uF & 10uH 10uF & 120uH 10uF & 120uH EMC external circuit The PDL02 series offer 2 watts of output power from a 21.8 x 9.2 x 11.1 mm package without derating to 85ºC and without external input/output capacitor. The PDL02 series with 2:1 wide input voltage of 4.5-9, 9-18, 18-36 and 36-75VDC and features 1000VDC of isolation, short-circuit. The safety meets to EN60950 and UL60950. All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25ºC otherwise noted DC-DC Converter Input Output + + - - +Input -Input 4mA current Source ctrl 1KΩ DC-DC ON +Input -Input 4mA current Source ctrl 1KΩ DC-DC OFF

  • SIP PACKAGE, 0.86 x 0.36x 0.44 INCH
  • NO EXTERNAL INPUT AND OUTPUT CAPACITOR NEEDED
  • 2:1 WIDE INPUT VOLTAGE RANGE
  • LOW RIPPLE & NOISE
  • UL94-V0 CASE POTTING MATERIALS
  • INPUT TO OUTPUT ISOLATION UP TO 1KV
  • CONTINUOUS SHORT CIRCUIT PROTECTION
  • EXTERNAL ON/OFF CONTROL

Voltage Min Load Full Load Input Current (5) Eff (6) (%) Capacitor(7) Load max PDL02-05S33 4.5 – 9 VDC 3.3 VDC 125mA 500mA 540mA 65 2200uF PDL02-05S05 4.5 – 9 VDC 5 VDC 100mA 400mA 645mA 66 1000uF PDL02-05S09 4.5 – 9 VDC 9 VDC 55mA 222mA 596mA 71 470uF PDL02-05S12 4.5 – 9 VDC 12 VDC 42mA 167mA 598mA 71 170uF PDL02-05S15 4.5 – 9 VDC 15 VDC 33mA 134mA 582mA 73 110uF PDL02-12S33 9 – 18 VDC 3.3 VDC 125mA 500mA 208mA 70 2200uF PDL02-12S05 9 – 18 VDC 5 VDC 100mA 400mA 234mA 75 1000uF PDL02-12S09 9 – 18 VDC 9 VDC 55mA 222mA 222mA 79 470uF PDL02-12S12 9 – 18 VDC 12 VDC 42mA 167mA 219mA 80 170uF PDL02-12S15 9 – 18 VDC 15 VDC 33mA 134mA 220mA 80 110uF PDL02-24S33 18 – 36 VDC 3.3 VDC 125mA 500mA 102mA 71 2200uF PDL02-24S05 18 – 36 VDC 5 VDC 100mA 400mA 115mA 76 1000uF PDL02-24S19 18 – 36 VDC 9 VDC 55mA 222mA 109mA 80 470uF PDL02-24S12 18 – 36 VDC 12 VDC 42mA 167mA 109mA 80 170uF PDL02-24S15 18 – 36 VDC 15 VDC 33mA 134mA 108mA 81 110uF PDL02-48S33 36 – 75 VDC 3.3 VDC 125mA 500mA 52mA 70 2200uF PDL02-48S05 36 – 75 VDC 5 VDC 100mA 400mA 60mA 73 1000uF PDL02-48S09 36 – 75 VDC 9 VDC 55mA 222mA 56mA 78 470uF PDL02-48S12 36 – 75 VDC 12 VDC 42mA 167mA 55mA 79 170uF PDL02-48S15 36 – 75 VDC 15 VDC 33mA 134mA 55mA 79 110uF Note 1. The PDL02 series required a minimum 25% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. It is no damage on the device without external input capacitor. There is smaller reflected ripple current when put a capacitor at input. The capacitor recommended use “CHEMICON” LXZ series or equivalent for 05 & 12Vin. use “CHEMICON” KMF series or equivalent for 24 & 48Vin. 3. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment). 4. The PDL02 series cannot meet EN55022 classes A if there is no filter at input. The filter capacitor recommended is same as note2. 5. Maximum value at nominal input voltage and full load. 6. Typical value at nominal input voltage and full load. 7. Test by minimum Vin and constant resistor load. PIN CONNECTION PIN DEFINE 1 - INPUT 2 + INPUT

3 CTRL

50 55 60 65 70 75 36 45 40 INPUT VOLTAGE (V) EFFICIENCY (%) PDL02-48S33 Efficiency VS Input voltage OUTPUT LOAD (A) EFFICIENCY (%) PDL02-48S33 Efficiency VS Output load .0.01 (0.32) Rectangular pin 0.08 (2.01)±0.5 0.16 (4.10)±0.5 0.02 (0.50)±0.05 0.44 (11.10) 1 2 3 5 6 7 8 0.10(2.54) 0.36 (9.20) 0.86(21.80) 0.13 (3.20) BOTTOM VIEW FRONT VIEW 1. ALL DIMENSIONS IN INCHES(mm) 2P I N P I T C H T O L E R A N C E/G7300 2 ( 05 ) 0.02 (0.50) 0.70(17.78) 50 60 70 80 90 100 -40 -25 0 -10 100 AMBIENT TEMPERATURE (ºC) OUTPUT POWER (%) Derating Curve PDL02-48S33 Nature convection