PD40-10 ETC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
40 Watts
100% Burn-In Small Size, Light Weight Three Wide Input Voltage Ranges 10-30 VDC, 20-60 VDC, 30-90 VDC Overvoltage Protection Overcurrent Protection Specification All specifications typical at nominal line, full load and 25°C PH: 508 429.9883 FAX: 800 226.2100 Email: sales@xp-iq.com Holliston, MA 01746 USAwww.XP-iQ.com Intelligent Design Quality Product XPiQ inc. DC/DC Converters Input Input Voltage • 10 to 30 VDC (PD40 “L” series) 20 to 60 VDC (PD40 “M” series) 30 to 90 VDC (PD40 “H” series) Input Current • 2.5A (rms) for 24 VDC 1.3A (rms) for 48 VDC 0.84A (rms) for 72 VDC Output Output Voltage/ • See rating chart Current Ripple • 1% peak to peak maximum Overvoltage • Provided on output #1 only, Protection set at 112-132% of its nominal output voltage Overcurrent • All outputs protected in short Protection: circuit conditions Temperature • All outputs ±0.04%/°C Coefficient: maximum General Efficiency • 65% minimum Hold-up time • 10 msec Line Regulation • ±0.5% max Isolation Voltage • 1000 VDC from input to output Environmental Operating • 0°C to +70°C* Temperature Storage • -40°C to +85°C Temperature MTBF • 100,000 hours Weight • 300 grams - PCB 500 grams - enclosed * Derate linearly from 100% load at 50°C to 50% load at 70°C PD 40 26/4/02 2:41 pm Page 1
PH: 508 429.9883 FAX: 800 226.2100 Email: sales@xp-iq.com Holliston, MA 01746 USAwww.XP-iQ.com OUTPUT VOLTAGE & CURRENT RATINGS PD 40 Notes Mechanical Details Pin Chart Output #1 Output #2 Output #3 Maximum Output Model Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Power 2 PD40-10 5V 0.0A 8.0A 1% 40W PD40-12 12V 0.0A 3.5A 1% 40W PD40-13 15V 0.0A 3.0A 1% 40W PD40-14 24V 0.0A 2.0A 1% 40W PD40-25 +5V 0.5A 3.0A 3% +24V 0.1A 1.0A 5% 40W MODEL PIN 1 2 3 4 5 6 PD40-10 PD40-12 OUTPUT OUTPUT OUTPUT RETURN RETURN RETURN PD40-13 PD40-14 #1 #1 #1 PD40-25 OUTPUT OUTPUT OUTPUT COMMON COMMON N.C. #2 #1 #1 RETURN RETURN PD40-30 PD40-31 OUTPUT OUTPUT OUTPUT COMMON COMMON OUTPUT PD40-32 #2 #1 #1 RETURN RETURN #3 1. All multi-output units may be operated at no load without damage. At no load, output tolerance increases to 10%. 2. Maximum output power for 10-30 VDC input range is 70% of that shown above. 3. Suffix codes for mechanical format and input range as follows: Input voltage range L: .10-30 VDC
2 Mechanical format: A: PCB only
M: .20-60 VDC C: Enclosed H: .30-90 VDC Example: PD40-31MC (20-60 VDC input range/Enclosed). Dimensions shown in inches (mm)/Tolerance ± 0.02 (0.5) maximum Input connector mates with Molex housing 09-50-3041 and Molex 2878 series crimp terminal Output connector mates with Molex housing 09-50-3061 and Molex 2878 series crimp terminal OPEN PCB “A” ENCLOSED “C” PD 40 26/4/02 2:41 pm Page 2