PCR NICHICON

Document overview

  • PDF pages: 2

Technical content

Page 1

CONDUCTIVE POLYMER ALUMINUM SOLID EL ECTROLYTIC CAPACITORS
PCRChip Type, High Reliability High reliability, High voltage (to 80V). Low ESR, High ripple current. Long life of 4000 hours at 125°C. SMD type : Lead free reflow soldering condition at 260°C peak complete correspondence. Compliant to the RoHS directive (2011/65/EU). PCR H Loig nh g C La ifep a Ac sit sa un rc ae nce PCX ESR after Endurance at -40°C. AEC-Q200 compliant. Please contact us for details.

Specifications

Item Performance Characteristics
Category Temperature Range –55 to +125°C
Rated Voltage Range 16 to 80V
Rated Capacitance Range 22 to 1000µF
Capacitance Tolerance ± 20% at 120Hz, 20°C
Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2) After 2 minutes' application of rated voltage, leakage current is not more than 0.03CV or 3(µA), whichever is greater.
Temperature Characteristics (Max.Impedance Ratio) Z+125°C / Z+20°C 1.25 (100kHz) Z–55°C / Z+20°C 1.25
Endurance Capacitance change Within ± 20% of initial capacitance value ( 3) The specifications listed at right shall be met when the tan δ 150% or less of the initial specified value capacitors are restored to 20°C after the rated voltage is ESR ( 1) 200% or less of the initial specified value applied for 4000 hours at 125°C. Leakage current ( 2) Less than or equal to the initial specified value
Shelf Life After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
ESR after Endurance ( 1) Less than or equal to the specified value at 100kHz, -40°C
Damp Heat (Steady State) Capacitance change Within ± 20% of initial capacitance value ( 3) The specifications listed at right shall be met when the tan δ 150% or less of the initial specified value capacitors are restored to 20°C after the rated voltage is ESR ( 1) 200% or less of the initial specified value applied for 1000 hours at 85°C, 85% RH. Leakage current ( 2) Less than or equal to the initial specified value
Resistance to Soldering Heat After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at right. Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. Capacitance change Within ± 10% of the initial capacitance value ( 3) The duration for over +230°C temperature at capacitor surface shall tan δ 130% or less than the initial specified value not exceed 60 seconds. ESR ( 1) 130% or less than the initial specified value In case peak temperature is 260°C or less, reflow soldering shall be Leakage current ( 2) Less than or equal to the initial specified value two times maximum. Measurement for solder temperature profile shall be made at the capacitor top and the terminal.
Marking Navy blue print on the case top

1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120

minutes at 105°C.

3 Initial value : The value before test of examination of resistance to soldering.

Dimensions

PDF page 1 diagram

Aid electrode

Dimension table in next page.

Type numbering system (Example : 35V 150µF)

1 2 3 4 5 6 7 8 9 10 11 12 13 14

PDF page 1 diagram

P C R 1 V 1 5 1 M

PDF page 1 diagram

Standard

Vibration Resistance

(mm)

(mm)

PDF page 1 diagram
PDF page 1 diagram

Frequency coefficient of rated ripple current

requency 1 20Hz 1kHz ­ 10kHz 100kHz or more
oefficient 0.05 0.30 0.70 1.00

V Code C D E V H J K

φ8×10L, φ10×10L, φ10×12.7L : The vibration structure-resistant product

is also available upon request, please ask for details.

CAT.8100H

Page 2

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS

PCR

Dimensions

Rated Voltage (V)(code) Surge Voltage (V) Rated Capacitance (µF) Case Size φD × L (mm) tan δ Initial ESR (mΩ) (20°C / 100kHz) Low temp. ESR after Endurance (mΩ) (-40°C / 100kHz) Rated Ripple (mArms) (125°C / 100kHz) Part Number
16 (1C) 20 220 8 × 7 0.08 30 60 1500 PCR1C221MCL1GS
470 8 × 10 0.08 17 34 3400 PCR1C471MCL6GS
470 10 × 8 0.08 32 64 2200 PCR1C471MCL1GS
560 8 × 12 0.08 16 32 3800 PCR1C561MCL1GS
680 10 × 10 0.08 19 38 3200 PCR1C681MCL1GS
1000 10 × 12.7 0.08 13 26 4300 PCR1C102MCL1GS
20 (1D) 25 150 8 × 7 0.08 39 78 1200 PCR1D151MCL1GS
330 8 × 10 0.08 19 38 3300 PCR1D331MCL6GS
330 10 × 8 0.08 33 66 2100 PCR1D331MCL1GS
470 8 × 12 0.08 18 36 3500 PCR1D471MCL1GS
560 10 × 10 0.08 20 40 3100 PCR1D561MCL1GS
680 10 × 12.7 0.08 14 28 4200 PCR1D681MCL1GS
25 (1E) 31 100 8 × 7 0.08 41 82 1200 PCR1E101MCL1GS
220 8 × 10 0.08 20 40 3200 PCR1E221MCL6GS
220 10 × 8 0.08 33 66 2100 PCR1E221MCL1GS
270 8 × 12 0.08 19 38 3300 PCR1E271MCL1GS
330 10 × 10 0.08 20 40 3100 PCR1E331MCL1GS
470 10 × 12.7 0.08 15 30 4100 PCR1E471MCL1GS
35 (1V) 43 68 8 × 7 0.08 44 88 1200 PCR1V680MCL1GS
150 8 × 10 0.08 22 44 3100 PCR1V151MCL6GS
150 10 × 8 0.08 33 66 2100 PCR1V151MCL1GS
220 8 × 12 0.08 21 42 3300 PCR1V221MCL1GS
270 10 × 10 0.08 20 40 3100 PCR1V271MCL1GS
330 10 × 12.7 0.08 16 32 3900 PCR1V331MCL1GS
50 (1H) 63 39 8 × 7 0.08 45 90 1300 PCR1H390MCL1GS
82 8 × 10 0.08 26 52 2900 PCR1H820MCL6GS
82 10 × 8 0.08 42 84 1900 PCR1H820MCL1GS
120 8 × 12 0.08 25 50 2900 PCR1H121MCL2GS
120 10 × 10 0.08 25 50 3000 PCR1H121MCL1GS
180 10 × 12.7 0.08 19 38 3500 PCR1H181MCL1GS
63 (1J) 79 22 8 × 7 0.08 48 96 1100 PCR1J220MCL1GS
39 8 × 10 0.08 28 56 2700 PCR1J390MCL1GS
47 10 × 8 0.08 47 94 1800 PCR1J470MCL1GS
56 8 × 12 0.08 27 54 2900 PCR1J560MCL1GS
68 10 × 10 0.08 28 56 2800 PCR1J680MCL1GS
100 10 × 12.7 0.08 24 48 3000 PCR1J101MCL1GS
80 (1K) 100 27 8 × 10 0.08 38 76 1400 PCR1K270MCL1GS
39 8 × 12 0.08 35 70 1600 PCR1K390MCL1GS
47 10 × 10 0.08 33 66 1700 PCR1K470MCL1GS
68 10 × 12.7 0.08 28 56 2100 PCR1K680MCL1GS

Rated ripple current (mArms) at 125°C 100kHz

No marked, 1 will be put at 12th digit of type numbering system. : In this case, 2 will be put at 12th digit of type numbering system. : In this case, 6 will be put at 12th digit of type numbering system.

Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity.

CAT.8100H