DATASHEET SEARCH SITE
Document overview
- PDF pages: 3
Technical content
Page 1
CR series
Chip Type, High Reliability
High reliability, High voltage (to 100V).
Low ESR, High ripple current.
Long life of 4000 hours at 125°C.
SMD type : Lead free reflow soldering condition at
CR
260°C peak complete correspondence.
Adapted to the RoHS directive (2011/65/EU).
Added ESR specification after the test at -40°C.
Specifications

High Capacitance
CX
Long Life Assurance
| Item | Performance Characteristics |
| Category Temperature Range | –55 to +125°C |
| Rated Voltage Range | 6.3 to 100V |
| Rated Capacitance Range | 5.6 to 2700µF |
| Capacitance Tolerance | ±20% at 120Hz, 20°C |
| Tangent of loss angle (tan δ) | Less than or equal to the specified value at 120Hz, 20°C |
| ESR ( 1) | Less than or equal to the specified value at 100kHz, 20°C |
| Leakage Current ( 2) | After 2 minutes' application of rated voltage, leakage current is not more than 0.03CV or 3(µA), whichever is greater. |
| Temperature Characteristics (Max.Impedance Ratio) | Z+125°C / Z+20°C 1.25 (100kHz) Z–55°C / Z+20°C 1.25 |
| Endurance | The specifications listed at right shall be met when the Capacitance change Within ± 20% of initial capacitance value ( 3) capacitors are restored to 20°C after D.C. bias plus rated tan δ 150% or less of the initial specified value ripple current is applied for 4000 hours at 125°C, the peak ESR ( 1) 150% or less of the initial specified value voltage shall not exceed the rated voltage. Leakage current ( 2) Less than or equal to the initial specified value |
| Shelf Life | The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C, 85% RH. |
| ESR after Endurance ( 1) | Less than or equal to the specified value at 100kHz, -40°C |
| Damp Heat (Steady State) | Capacitance change Within ± 20% of initial capacitance value ( 3) The specifications listed at right shall be met when the tan δ 150% or less of the initial specified value capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C, 85% RH. ESR ( 1) 150% or less of the initial specified value Leakage current ( 2) Less than or equal to the initial specified value |
| Resistance to Soldering Heat | After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at right, provided that it's temperature profile is measured at the capacitor top and the terminal. Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. Capacitance change Within ± 10% of the initial capacitance value ( 3) The duration for over +230°C temperature at capacitor surface shall tan δ 130% or less than the initial specified value not exceed 60 seconds. ESR ( 1) 130% or less than the initial specified value In the case of peak temp, less than 250°C, reflow soldering shall be Leakage current ( 2) Less than or equal to the initial specified value two times maximum. In the case of peak temp, less than 260°C, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the capacitor top and the terminal. |
| Marking | Navy blue print on the case top |
1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
3 Initial value : The value before test of examination of resistance to soldering.

(mm)
| Size | φ5 × 6L | φ6.3 × 6L | φ6.3 × 8L | φ8 × 7L | φ8 × 10L | φ8 × 12L | φ10 × 8L | φ10 × 10 |
| φD | 5.0 | 6.3 | 6.3 | 8.0 | 8.0 | 8.0 | 10.0 | 10.0 |
| L | 5.9 | 5.9 | 7.9 | 6.9 | 9.9 | 11.9 | 7.9 | 9.9 |
| A | 6.0 | 7.3 | 7.3 | 9.0 | 9.0 | 9.0 | 11.0 | 11.0 |
| B | 5.3 | 6.6 | 6.6 | 8.3 | 8.3 | 8.3 | 10.3 | 10.3 |
| C | 5.3 | 6.6 | 6.6 | 8.3 | 8.3 | 8.3 | 10.3 | 10.3 |
| E | 1.6 | 2.1 | 2.1 | 3.2 | 3.2 | 3.2 | 4.6 | 4.6 |
| H | 0.5 to 0.8 | 0.5 to 0.8 | 0.5 to 0.8 | 0.8 to 1.1 | 0.8 to 1.1 | 0.8 to 1.1 | 0.8 to 1.1 | 0.8 to 1 |
φ10×12.7L 10.0 12.6 11.0 10.3
Voltage
Type numbering system (Example : 35V 150µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14

φ6.3 × 8L, φ8 × 7L, φ8 × 10L, φ10 × 10L : The vibration structure-resistant product is also available upon request, please ask for detail.
| V 6.3 1 | 0 16 | 20 | 25 | 35 | 50 | 63 | 80 | 100 |
| Code j | A C | D | E | V | H | J | K | 2A |
10.3 4.6 0.8 to 1.1
Dimension table in next page.
Page 2
CRseries
Standard Ratings
| Rated Voltage (V)(code) | Surge Voltage (V) | Rated Capacitance (µF) | Case Size φD × L (mm) | tan δ | Initial ESR (mΩ) 。 (20C / 100kHz) | Low temp. ESR after Endurance (mΩ) 。 (-40C / 100kHz) | Rated Ripple (mArms) 。 (125C / 100kHz) | Part Number |
|---|---|---|---|---|---|---|---|---|
| 6.3 (0J) | 8 | 180 | 5 × 6 | 0.10 | 55 | 83 | 900 | PCR0J181MCL1GS |
| 330 | 6.3 × 6 | 0.10 | 32 | 48 | 1500 | PCR0J331MCL1GS | ||
| 560 | 6.3 × 8 | 0.10 | 20 | 30 | 1800 | PCR0J561MCL4GS | ||
| 560 | 8 × 7 | 0.10 | 25 | 38 | 1600 | PCR0J561MCL1GS | ||
| 1000 | 8 × 10 | 0.10 | 15 | 23 | 3700 | PCR0J102MCL1GS | ||
| 1200 | 10 × 8 | 0.10 | 18 | 27 | 3000 | PCR0J122MCL1GS | ||
| 1500 | 8 × 12 | 0.10 | 14 | 21 | 4000 | PCR0J152MCL1GS | ||
| 1800 | 10 × 10 | 0.10 | 15 | 23 | 3600 | PCR0J182MCL1GS | ||
| 2700 | 10 × 12.7 | 0.10 | 11 | 17 | 4700 | PCR0J272MCL1GS | ||
| 10 (1A) | 13 | 120 | 5 × 6 | 0.10 | 60 | 90 | 800 | PCR1A121MCL1GS |
| 180 | 6.3 × 6 | 0.10 | 34 | 51 | 1400 | PCR1A181MCL1GS | ||
| 330 | 6.3 × 8 | 0.10 | 22 | 33 | 1700 | PCR1A331MCL4GS | ||
| 330 | 8 × 7 | 0.10 | 28 | 42 | 1600 | PCR1A331MCL1GS | ||
| 680 | 8 × 10 | 0.10 | 16 | 24 | 3500 | PCR1A681MCL6GS | ||
| 680 | 10 × 8 | 0.10 | 20 | 30 | 2900 | PCR1A681MCL1GS | ||
| 1000 | 8 × 12 | 0.10 | 15 | 23 | 3800 | PCR1A102MCL1GS | ||
| 1200 | 10 × 10 | 0.10 | 17 | 26 | 3400 | PCR1A122MCL1GS | ||
| 1500 | 10 × 12.7 | 0.10 | 12 | 18 | 4500 | PCR1A152MCL1GS | ||
| 16 (1C) | 20 | 68 | 5 × 6 | 0.08 | 65 | 98 | 800 | PCR1C680MCL1GS |
| 120 | 6.3 × 6 | 0.08 | 36 | 54 | 1300 | PCR1C121MCL1GS | ||
| 220 | 6.3 × 8 | 0.08 | 23 | 35 | 1700 | PCR1C221MCL4GS | ||
| 220 | 8 × 7 | 0.08 | 30 | 45 | 1500 | PCR1C221MCL1GS | ||
| 470 | 8 × 10 | 0.08 | 17 | 26 | 3400 | PCR1C471MCL6GS | ||
| 470 | 10 × 8 | 0.08 | 22 | 33 | 2700 | PCR1C471MCL1GS | ||
| 560 | 8 × 12 | 0.08 | 16 | 24 | 3800 | PCR1C561MCL1GS | ||
| 680 | 10 × 10 | 0.08 | 19 | 29 | 3200 | PCR1C681MCL1GS | ||
| 1000 | 10 × 12.7 | 0.08 | 13 | 20 | 4300 | PCR1C102MCL1GS | ||
| 20 (1D) | 25 | 56 | 5 × 6 | 0.08 | 70 | 105 | 700 | PCR1D560MCL1GS |
| 100 | 6.3 × 6 | 0.08 | 41 | 62 | 1300 | PCR1D101MCL1GS | ||
| 150 | 6.3 × 8 | 0.08 | 25 | 38 | 1700 | PCR1D151MCL4GS | ||
| 150 | 8 × 7 | 0.08 | 39 | 59 | 1200 | PCR1D151MCL1GS | ||
| 330 | 8 × 10 | 0.08 | 19 | 29 | 3300 | PCR1D331MCL6GS | ||
| 330 | 10 × 8 | 0.08 | 23 | 35 | 2600 | PCR1D331MCL1GS | ||
| 470 | 8 × 12 | 0.08 | 18 | 27 | 3500 | PCR1D471MCL1GS | ||
| 560 | 10 × 10 | 0.08 | 20 | 30 | 3100 | PCR1D561MCL1GS | ||
| 680 | 10 × 12.7 | 0.08 | 14 | 21 | 4200 | PCR1D681MCL1GS | ||
| 25 (1E) | 31 | 33 | 5 × 6 | 0.08 | 75 | 113 | 700 | PCR1E330MCL1GS |
| 56 | 6.3 × 6 | 0.08 | 43 | 65 | 1300 | PCR1E560MCL1GS | ||
| 100 | 6.3 × 8 | 0.08 | 27 | 41 | 1600 | PCR1E101MCL4GS | ||
| 100 | 8 × 7 | 0.08 | 41 | 62 | 1200 | PCR1E101MCL1GS | ||
| 220 | 8 × 10 | 0.08 | 20 | 30 | 3200 | PCR1E221MCL6GS | ||
| 220 | 10 × 8 | 0.08 | 24 | 36 | 2500 | PCR1E221MCL1GS | ||
| 270 | 8 × 12 | 0.08 | 19 | 29 | 3300 | PCR1E271MCL1GS | ||
| 330 | 10 × 10 | 0.08 | 20 | 30 | 3100 | PCR1E331MCL1GS | ||
| 470 | 10 × 12.7 | 0.08 | 15 | 23 | 4100 | PCR1E471MCL1GS | ||
| 35 (1V) | 43 | 27 | 5 × 6 | 0.08 | 80 | 120 | 600 | PCR1V270MCL1GS |
| 47 | 6.3 × 6 | 0.08 | 48 | 72 | 1100 | PCR1V470MCL1GS | ||
| 68 | 6.3 × 8 | 0.08 | 31 | 47 | 1500 | PCR1V680MCL4GS | ||
| 68 | 8 × 7 | 0.08 | 44 | 66 | 1200 | PCR1V680MCL1GS | ||
| 150 | 8 × 10 | 0.08 | 22 | 33 | 3100 | PCR1V151MCL6GS | ||
| 150 | 10 × 8 | 0.08 | 25 | 38 | 2500 | PCR1V151MCL1GS | ||
| 220 | 8 × 12 | 0.08 | 21 | 32 | 3300 | PCR1V221MCL1GS | ||
| 270 | 10 × 10 | 0.08 | 20 | 30 | 3100 | PCR1V271MCL1GS | ||
| 330 | 10 × 12.7 | 0.08 | 16 | 24 | 3900 | PCR1V331MCL1GS |
Page 3
CRseries
Standard Ratings
| Rated Voltage (V)(code) | Surge Voltage (V) | Rated Capacitance (µF) | Case Size φD × L (mm) | tan δ | Initial ESR (mΩ) 。 (20C / 100kHz) | Low temp. ESR after Endurance (mΩ) 。 (-40C / 100kHz) | Rated Ripple (mArms) | Part Number | |
|---|---|---|---|---|---|---|---|---|---|
| 50 (1H) | 63 | 12 | 5 × 6 | 0.08 | 88 | 132 | 600 | PCR1H120MCL1GS | |
| 22 | 6.3 × 6 | 0.08 | 50 | 75 | 1000 | PCR1H220MCL1GS | |||
| 39 | 6.3 × 8 | 0.08 | 36 | 54 | 1300 | PCR1H390MCL4GS | |||
| 39 | 8 × 7 | 0.08 | 45 | 68 | 1300 | PCR1H390MCL1GS | |||
| 82 | 8 × 10 | 0.08 | 26 | 39 | 2900 | PCR1H820MCL6GS | |||
| 82 | 10 × 8 | 0.08 | 34 | 51 | 2200 | PCR1H820MCL1GS | |||
| 120 | 8 × 12 | 0.08 | 25 | 38 | 2900 | PCR1H121MCL2GS | |||
| 120 | 10 × 10 | 0.08 | 25 | 38 | 3000 | PCR1H121MCL1GS | |||
| 180 | 10 × 12.7 | 0.08 | 19 | 29 | 3500 | PCR1H181MCL1GS | |||
| 63 (1J) | 79 | 6.8 | 5 × 6 | 0.08 | 92 | 138 | 600 | PCR1J6R8MCL1GS | |
| 12 | 6.3 × 6 | 0.08 | 51 | 77 | 1000 | PCR1J120MCL1GS | |||
| 22 | 6.3 × 8 | 0.08 | 45 | 68 | 1200 | PCR1J220MCL4GS | |||
| 22 | 8 × 7 | 0.08 | 48 | 72 | 1100 | PCR1J220MCL1GS | |||
| 39 | 8 × 10 | 0.08 | 28 | 42 | 2700 | PCR1J390MCL1GS | |||
| 47 | 10 × 8 | 0.08 | 35 | 53 | 2100 | PCR1J470MCL1GS | |||
| 56 | 8 × 12 | 0.08 | 27 | 41 | 2900 | PCR1J560MCL1GS | |||
| 68 | 10 × 10 | 0.08 | 28 | 42 | 2800 | PCR1J680MCL1GS | |||
| 100 | 10 × 12.7 | 0.08 | 24 | 36 | 3000 | PCR1J101MCL1GS | |||
| 80 (1K) | 100 | 12 | 6.3 × 8 | 0.08 | 50 | 75 | 1200 | PCR1K120MCL1GS | |
| 27 | 8 × 10 | 0.08 | 38 | 57 | 1400 | PCR1K270MCL1GS | |||
| 39 | 8 × 12 | 0.08 | 35 | 53 | 1600 | PCR1K390MCL1GS | |||
| 47 | 10 × 10 | 0.08 | 33 | 50 | 1700 | PCR1K470MCL1GS | |||
| 68 | 10 × 12.7 | 0.08 | 28 | 42 | 2100 | PCR1K680MCL1GS | |||
| 100 (2A) | 125 | 5.6 | 6.3 × 8 | 0.08 | 55 | 83 | 1100 | PCR2A5R6MCL1GS | |
| 12 | 8 × 10 | 0.08 | 45 | 68 | 1200 | PCR2A120MCL1GS | |||
| 18 | 8 × 12 | 0.08 | 42 | 63 | 1500 | PCR2A180MCL1GS | |||
| 22 | 10 × 10 | 0.08 | 39 | 59 | 1600 | PCR2A220MCL1GS | |||
| 33 | 10 × 12.7 | 0.08 | 28 | 42 | 2100 | PCR2A330MCL1GS | |||
Rated ripple current (mArms) at 125°C 100kHz
No marked, 1 will be put at 12th digit of type numbering system. : In this case, 2 will be put at 12th digit of type numbering system. : In this case, 4 will be put at 12th digit of type numbering system. : In this case, 6 will be put at 12th digit of type numbering system.
Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity.