DATASHEET SEARCH SITE

Document overview

  • PDF pages: 7

Technical content

Page 1

Parameter Ratings Units
Blocking Voltage 400 V P
Load Current 130 mA / mA rms DC
On-Resistance (max) 25

Features

  • 5000Vrms Input/Output Isolation
  • Low Drive Power Requirements (TTL/CMOS Compatible)
  • High Reliability
  • Arc-Free With No Snubbing Circuits
  • No EMI/RFI Generation
  • Small 8-Pin Package
  • Machine Insertable, Wave Solderable
  • Surface Mount, Tape & Reel Versions Available

Applications

  • Telecommunications
  • Telecom Switching
  • Tip/Ring Circuits
  • Modem Switching (Laptop, Notebook, Pocket Size)
  • Hook Switch
  • Dial Pulsing
  • Ground Start
  • Ringing Injection
  • Instrumentation
  • Multiplexers
  • Data Acquisition
  • Electronic Switching
  • I/O Subsystems
  • Meters (Watt-Hour, Water, Gas)
  • Medical Equipment-Patient/Equipment Isolation
  • Security
  • Aerospace
  • Industrial Controls

e3

Pb

DS-PBB190-R02

Dual Single-Pole, Normally Closed

OptoMOS® Relay

Description

PBB190 is a dual single-pole, normally closed (1-Form-B) solid state relay with two independently controlled switches that use optically coupled MOSFET technology to provide 5000Vrms of input to output isolation.

Its optically coupled outputs, which use the patented OptoMOS architecture, are controlled by a highly efficient GaAIAs infrared LED.

Dual single-pole OptoMOS relays provide a more compact design solution than discrete single-pole relays in a variety of applications by incorporating both relays in a single 8-pin package.

Approvals

  • UL Recognized Component: File E76270
  • CSA Certified Component: Certificate 1175739
  • EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 006

Ordering Information

Part # Description
PBB190 8-Lead DIP (50/Tube)
PBB190S 8-Lead Surface Mount (50/Tube)
PBB190STR 8-Lead Surface Mount (1,000/Reel)

Pin Configuration

1

8

+ Control - Switch #1

Load - Switch #1

2

7

  • Control - Switch #1

Load - Switch #1

3

6

+ Control - Switch #2

Load - Switch #2 5

4

  • Control - Switch #2

Load - Switch #2

Switching Characteristics of Normally Closed Devices

PDF page 1 diagram

Page 2

Absolute Maximum Ratings @ 25ºC

Parameter Ratings Units
Blocking Voltage 400 V P
Reverse Input Voltage 5 V
LED Forward Current Peak (10ms) 50 mA
1 A
Input Power Dissipation 1 150 mW
Total Power Dissipation 2 800 mW
Isolation Voltage, Input to Output (60 Seconds) 5000 V rms
ESD Rating, Human Body Model 8 kV
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C

1 Derate linearly 1.33 mW / ºC 2 Derate linearly 6.67 mW / ºC

Electrical Characteristics @ 25ºC

Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied.

Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current 1 Continuous Peak I=0mA F I L - - 130 mA / mA rms DC
I=0mA, t=10ms F - - ±400 mA P
On-Resistance 2 I=0mA, I=130mA F L R ON - - 25
Off-State Leakage Current I=2mA, V=400V F L P I LEAK - - 1 A
Switching Speeds Turn-On Turn-Off I=5 mA, V=10V F L t on - - 1 ms
t off - - 2.5
Output Capacitance I=5mA, V=50V, f=1MHz F L C OUT - 11 - pF
Input Characteristics
LED Forward Current To Activate 3 To Deactivate I=130mA L I F - 0.38 2 mA
- 0.2 0.35 -
Input Voltage Drop I=5mA F V F 0.9 1.2 1.4 V
Reverse Input Current V=5V R I R - - 10 µA
Common Characteristics
Input to Output Capacitance - C I/O - 3 - pF

1 If both poles operate simultaneously, then the load current must be derated so that the package power dissipation value is not exceeded. 2 Measurement taken within 1 second of on-time. 3 For high temperature operation (>60ºC), a LED forward current of 4mA is recommended.

Page 3

PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted) \*

Typical Turn-On Time

Typical LED Forward Voltage Drop

Typical Turn-Off Time

(N=50, IF=5mA, IL=100mA)

(N=50, IF=5mA)

(N=50, IF=5mA, IL=100mA)

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

LED Forward Voltage (V)

Turn-Off Time (ms)

Turn-On Time (ms)

Typical LED Forward Current

Typical On-Resistance Distribution

to Activate

Typical Blocking Voltage Distribution

(N=50, IF=0mA, IL=100mA)

(N=50, IL=100mA)

(N=50, IF=2mA)

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

On-Resistance (:)

Blocking Voltage (VP)

LED Forward Current (mA)

Typical Turn-On Time

Typical Turn-Off Time

vs. LED Forward Current

vs. LED Forward Current

LED Forward Voltage

(IL=100mA)

(IL=100mA)

vs. LED Forward Current

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

LED Forward Current (mA)

LED Forward Current (mA)

LED Forward Voltage (V)

Turn-On Time vs. Temperature

Turn-Off Time vs. Temperature

Typical LED Forward Voltage Drop

(IL=75mA)

vs. Temperature

(IL=75mA)

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

Temperature (ºC)

Temperature (ºC)

Temperature (ºC)

\* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department.

Page 4

PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted) \*

On-Resistance

Typical Load Current

LED Forward Current to Activate

vs. Temperature

vs. Load Voltage

vs. Temperature

(IF=0mA, IL=75mA)

(IF=0mA)

(IL=75mA)

PDF page 4 diagram
PDF page 4 diagram

Temperature (ºC)

Temperature (ºC)

Maximum Load Current

Typical Blocking Voltage

vs. Temperature

vs. Temperature

(IF=0mA)

(IF=5mA)

PDF page 4 diagram

Load Voltage (V)

Typical Leakage vs. Temperature Measured Across Pins 5&6, 7&8 (IF=5mA, VL=400V)

PDF page 4 diagram
PDF page 4 diagram

Temperature (ºC)

Temperature (ºC)

Output Capacitance vs. Load Voltage (IF=5mA, f=1MHz)

PDF page 4 diagram

Temperature (ºC)

Energy Rating Curve

PDF page 4 diagram
PDF page 4 diagram

Load Voltage (V)

Time

\* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department.

Page 5

Manufacturing Information

Moisture Sensitivity

All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below.

Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability.

This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.

Device Moisture Sensitivity Level (MSL) Rating
PBB190 / PBB190S MSL 1

ESD Sensitivity

This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.

Reflow Profile

This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed.

Device Maximum Temperature x Time
PBB190 / PBB190S 250ºC for 30 seconds

Board Wash

IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used.

e3

Pb

Page 6

Mechanical Dimensions

PDF page 6 diagram

9.652 ± 0.381

7.620 ± 0.254

(0.380 ± 0.015)

(0.300 ± 0.010)

3.302 ± 0.051 (0.130 ± 0.002)

4.064 TYP

PDF page 6 diagram

PBB190S

PDF page 6 diagram

3.302 ± 0.051 (0.130 ± 0.002)

7.620 ± 0.254 (0.300 ± 0.010)

PDF page 6 diagram

PCB Hole Pattern

PDF page 6 diagram

9.144 ± 0.508 (0.360 ± 0.020)

7.239 TYP. (0.285)

0.254 ± 0.0127 (0.010 ± 0.0005)

Dimensions mm (inches)

PCB Land Pattern

0.635 ± 0.127 (0.025 ± 0.005)

2.54 (0.10)

8.90

1.65

(0.3503)

(0.0649)

0.254 ± 0.0127 (0.010 ± 0.0005)

0.65 (0.0255)

Dimensions mm (inches)

Page 7

PBB190STR Tape & Reel

PDF page 7 diagram
PDF page 7 diagram

User Direction of Feed

Dimensions mm (inches)

  1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2

For additional information please visit our website at: www.ixysic.com

IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.

Specification: DS-PBB190-R02 ©Copyright 2012, IXYS Integrated Circuits Division OptoMOS® is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012