G7754-01_07 HAMAMATSU

Document overview

  • PDF pages: 2

Technical content

Page 1

PDF page 1 diagram

These devices combine a dewar type detector with a compatible preamplifier, and easily operate to detect infrared radiation just by connecting to a DC power supply. InGaAs, InSb and MCT (HgCdTe) detectors are provided as standard devices (liquid nitrogen cooling). Custom-designed devices with different active areas, FOV or amplifier gain, etc. are also available to meet your specific needs.

PDF page 1 diagram

Accessories (Supplied) l 4-conductor cable (for DC power supply): 2 m (connector installed at one end)

A4372-02

l BNC-BNC coaxial cable (for signal output): 2 m E2573 l Instruction manual

I Specifications / Absolute maximum ratings

PDF page 1 diagram
PDF page 1 diagram
PDF page 1 diagram

I Electrical and optical characteristics (Typ.)

PDF page 1 diagram
PDF page 1 diagram
Measurement condition Peak sensitivity wavelength λp (µm) Cut-off wavelength λc (µm) Photo sensitivity S λ=λp (V/W) NEP (W/Hz1/2) Frequency response -3 dB (Hz) Output impedance (Ω) Maximum output voltage RL=1 kΩ (V)
Element temperature T (°C)
-196 2.0 2.4 2 × 109 3 × 10-14 2 to 500 50 ±10
5 × 108 1.5 × 10-13 2 to 500 ±10
5.3 5.5 3 × 108 3 × 10-13 5 to 10000 ±10
1.5 × 108 1 × 10-12 5 to 12000 ±10
12 14 2 × 106 3 × 10-12 5 to 140000 ±3
PDF page 1 diagram

Page 2

Infrared detector module with preamp Metal dewar type

I Spectral response

(Typ. T= -196 ˚C)

PDF page 2 diagram

WAVELENGTH (µm)

KIRDB0076EC

I Dimensional outline (unit: mm)

DC INPUT VOLTAGE ±15 V (4-PIN CONNECTOR)

PDF page 2 diagram

KIRDA0010EC

I Precaution for use

  • The detector should not be placed horizontally during use.
  • Using these detectors in an environment subjected to vibration may cause microphonic noise. Take measures to prevent

vibration as needed.

Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K.

HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10

United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741

Cat. No. KIRD1024E04 Feb. 2007 DN