P6KE LEIDITECH
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
P6KE Series 600W Transient Voltage Suppressor DESCRIPTION: The P6KE series of high current uni/bi-directional transient suppressors are designed for A.C. line protection and high power DC bus clamping applications. These devices offer uni/bi-directional port protection from 6.8 volts to 600 volts. They provide a clamping voltage lower than the avalanche voltage. Therefore, any voltage rise due to increased current conduction is contained to a minimum, providing the best possible protection level. They can also be connected in series and/or parallel to create very high capacity protection solutions. FEATURES: Low zener impedance. Excellent clamping capability. Repetition rate (duty cycle): 0.01%. JEDEC DO-15/DO-204AC Molded Plastic. Color band denoted cathode except bidirectional. High temperature soldering: 260℃/10s at terminals. Glass passivated or plannar chip junction in DO-15/DO-204AC package. 600W Peak Pulse power capability at 10×1000μs waveform. Fast response time: typically less than 1.0ps from 0V to V BR min. ABSOLUTE MAXIMUM RATINGS A =25ºC, RH=45%-75%, unless otherwise noted) Parameter Symbol Value Unit Peak pulse power dissipation on 10/1000μs waveform P PP 600 W Peak pulse current of on 10/1000μs waveform I PP See next table A Steady state power dissipation at T L =75℃ P M(AV) 5.0 W Operating junction and Storage temperature range T STG, T J -55 to +125 ℃ Peak forward surge current, 8.3ms single half sine-wave I FSM 100 A DO-15 Symbol Rev : www.leiditech.com 01.06.2014 AEC-Q101 qualified.
ELECTRICAL CHARACTERISTICS
A =25℃) Part Number V R I R R V BR T I T V C PP I PP Uni-Polar Bi-Polar V μA min(V) max(V) mA max(V) A P6KE12A P6KE12CA 10.2 2 11.40 12.60 1 16.7 36 P6KE13A P6KE13CA 11.1 1 12.40 13.70 1 18.2 33 P6KE27A P6KE27CA 23.1 1 25.70 28.40 1 37.5 16 Rev : www.leiditech.com 01.06.2014 P6KE Series 600W Transient Voltage Suppressor
A =25℃, continued) Part Number V R I R R V BR T I T V C PP I PP Uni-Polar Bi-Polar V μA min(V) max(V) mA max(V) A ① Surge waveform: 10/1000μs V R ：Stand-off Voltage -- Maximum voltage that can be applied V BR ：Breakdown Voltage V C ：Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ipp I R ：Reverse Leakage Current Rev : www.leiditech.com 01.06.2014 P6KE Series 600W Transient Voltage Suppressor
RATINGS AND V-I CHARACTERISTICS CURVES A =25ºC, unless otherwise noted) FIG.1:V- I curve characteristics (Uni-directional) FIG.2:V- I curve characteristics (Bi-directional) I PP V C V BR V R V F V I PP V C V BR V R V V C V BR V R I R I T I R I T I PP FIG.3: Pulse waveform I PPM (%I RSM 100 0 1.0 2.0 3.0 4.0 Peak value 150 Half value tr=10μs td tr = rise time to peak value td = decay time to half value t(ms) FIG.4: Pulse derating curve P PP derating in percentage(%) 0 25 50 75 100 125 150 175 100 T A SOLDERING PARAMETERS Reflow Condition Pb-Free assembly (see FIG.5) Pre Heat -Temperature Min (T s(min) ) +150℃ -Temperature Max(T s(max) ) +200℃ -Time (Min to Max) (t s ) 60-180 secs. Average ramp up rate (Liquid us Temp L ) to peak) 3℃/sec. Max T s(max) to T L - Ramp-up Rate 3℃/sec. Max Reflow -Temperature(T L )(Liquid us) +217℃ -Temperature(t L ) 60-150 secs. Peak Temp (T p ) +260(+0/-5)℃ Time within 5℃ of actual Peak Temp (t p ) 30 secs. Max Ramp-down Rate 6℃/sec. Max Time 25℃ to Peak Temp (T P ) 8 min. Max Do not exceed +260℃ FIG.5: Reflow condition Temperature T S(min) T S(max) T L T P tp t L time to peak temperatue Time (t 25 to peak) Ramp-up Ramp-down Preheat Critical Zone T L to T P t s Rev : www.leiditech.com 01.06.2014 P6KE Series 600W Transient Voltage Suppressor
MARKING ＆ ORDERING INFORMATION Product Type Cathode Band P6KE XX C A (1) (2) (3) (4) (1)Series:600 watts series (2)Reverse Stand-off Voltage (3)Bi-directional (4)5% V BR Voltage tolerance Logo P6KExxCA PACKAGE MECHANICAL DATA Dimensions MillimetersInchesRef. Min. A B C D Max. Min. Max. 1.000 25.40 0.228 0.027 0.118 0.300 0.035 0.140 5.80 0.69 3.00 7.62 0.89 3.60 - - A B A C D Part Number Case Type Quantity Packing Option P6KEXXCA/A DO-15/DO-204AC 2000 Box Shanghai Leiditech Electronic Co.,Ltd Email: sale1@leiditech.com Tel : +86- 021 50828806 Fax : +86- 021 50477059 Rev : www.leiditech.com 01.06.2014 P6KE Series 600W Transient Voltage Suppressor