DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

P www.vishay.com Vishay Sfernice Revision: 20-Feb-15 1 Document Number: 53017 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 High Precision Wraparound - Wide Ohmic Value Range Thin Film Chip Resistors, Sulfur Resistant For low noise and precision app lications, superior stability, low temperature coefficient of resistance, and low voltage coefficient, Vishay Sfernice’s proven precision thin film wraparound resistors exceed requirements of MIL-PRF-55342G characteristics Y ± 10 ppm/°C (-55 °C; +155 °C) down to ± 5 ppm/°C (-55 °C; +155 °C).

FEATURES

  • Load life stability 0.02 % typical at 8000 h at 70 °C under Pd (0.033 % maximum)
  • Low temperature coefficient down to 5 ppm/°C (-55 °C; +155 °C)
  • Very low noise < - 35 dB and voltage coefficient < 0.01 ppm/V
  • Wide resistance range: 10  to 200 M  depending on size
  • Tolerances to ± 0.01 %
  • In lot tracking  5 ppm/°C
  • Termination: Thin film technology
  • Short circuits (jumpers) r < 50 mR, I < 2 A, see PZR datasheet (www.vishay.com/doc?53053
  • Withstand moisture resistance test of AEC-Q200
  • Sulfur resistant (per ASTM B809-95 humid vapor test)
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. Notes (1) Pn = Nominal power - Pd = Derated power intended to improve stability. (2) For ohmic range versus tolerance and TCR see detailed table on next page. (3) Model P0805 being same size than case 0705 with same performances, only codification of P0805 remains. (4) With special assembly care. Note
  • For temperature up to 230 °C, see PHT datasheet (www.vishay.com/doc?53050 Available Available Available Available STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE RESISTANCE RANGE (2) () RATED POWER W Pn (1) RATED POWER W Pd (1) LIMITING ELEMENT VOLTAGE V TOLERANCE ± % TEMPERATURE COEFFICIENT ± ppm/°C P0805 P2010 2010 10 to 76M 1 CLIMATIC SPECIFICATIONS Operating temperature range -55 °C; +155 °C PERFORMANCE VS. HUMID SULFUR VAPOR Test conditions 50 °C ± 2 °C, 85 % ± 4 % RH, exposure time 500 h Test results Resistance drift < (0.05 % R + 0.05 ), no corrosion products observed MECHANICAL SPECIFICATIONS Substrate Alumina Technology Thin film Film Nickel chromium with mineral passivation or CrSi Protection Epoxy + silicone Terminations B type: SnPb over nickel barrier for solder reflow N type: SnAg over nickel barrier G type: gold over nickel barrierfor other applications

P www.vishay.com Vishay Sfernice Revision: 20-Feb-15 2 Document Number: 53017 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • Case 0805 being same than case 0705, only codification of 0805 remains. DIMENSIONS in millimeters (inches) CASE SIZE AB C D/E MAX. TOL. +0.152 (+0.006) MIN. TOL. -0.152 (-0.006) MAX. TOL. +0.127 (+0.005) MIN. TOL. -0.127 (-0.005) NOMINAL NOMINAL NOMINAL TOLERANCE 0.5 (0.02) ± 0.127 (0.005) 0.38 (0.015) 0.13 (0.005) SUGGESTED LAND PATTERN (to IPC-7351A) CHIP SIZE DIMENSIONS in millimeters (inches) Zmax. Gmin. Xmax. A DD C EE B Gmin. Zmax. Xmax.

P www.vishay.com Vishay Sfernice Revision: 20-Feb-15 3 Document Number: 53017 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 POWER DERATING CURVETEMPERATURE COEFFICIENT TCR CODE FILM ± 5 ppm/°C C (-55 °C; +155 °C) NiCr ± 5 ppm/°C Z (0 °C; +70 °C) NiCr ± 10 ppm/°C Y NiCr ± 25 ppm/°C E NiCr ± 50 ppm/°C H NiCr or CrSi ± 100 ppm/°C K NiCr or CrSi 07 0 20 40 60 80 100 120 140 1550 100 Ambient Temperature in °C Rated Power (%) BEST TOLERANCE AND TCR VS. OHMIC VALUE STYLE RANGE () TOLERANCE (± %) TCR CODE 0302 > 75K to 750K 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K 0402 > 100K to 150K 0.05; 0.1; 0.25; 0.5; 1; 2; 5 E; H; K 0505 > 260K to 400K 0.05; 0.1; 0.25; 0.5; 1; 2; 5 E; H; K > 400K to 4M 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K 0603 > 332K to 500K 0.05; 0.1; 0.25; 0.5; 1; 2; 5 (1) E; H; K > 500K to 3M2 0.1; 0.25; 0.5; 1; 2; 5 H; K 0805 > 511K to 750K 0.05; 0.1; 0.25; 0.5; 1; 2; 5 E; H; K > 750K to 10M 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K

P www.vishay.com Vishay Sfernice Revision: 20-Feb-15 4 Document Number: 53017 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) Tolerance 0.05 % on request. 1005 > 550K to 810K 0.05; 0.1; 0.25; 0.5; 1; 2; 5 E; H; K > 810K to 8M1 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K 1206 > 3M5 to 35M 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K 1505 2010 > 7M5 to 76M 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K 2512 > 15M to 200M 0.1; 0.25; 0.5; 1; 2; 5 (1) H; K BEST TOLERANCE AND TCR VS. OHMIC VALUE STYLE RANGE () TOLERANCE (± %) TCR CODE

P www.vishay.com Vishay Sfernice Revision: 20-Feb-15 5 Document Number: 53017 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 POPULAR OPTIONS For any option it is recommended to consult Vishay Sfernice for availability first. Option: Enlarged Terminations For stringent and special power dissipation requirements, the thermal resistance between the resistive layer and the solder joint can be reduced using enlarged terminations chip resistors which are soldered on large and thick copper pads acting as heatsink (see application note: 53048 Power Dissipation in High Precision Vishay Sfernice Chip Resistors and Arrays (P Thin Film, PRA Arrays, CHP Thick Film) www.vishay.com/doc?53048 Option to order 0063: (applies to size 1206/1505/2010). DIMENSIONS (Option 0063) in millimeters CASE SIZE AB E D FMAX. TOL. +0.152 MIN. TOL. -0.152 MAX. TOL. +0.127 MIN. TOL. -0.127 MAX. TOL. +0.13 MIN. TOL. -0.13 MAX. TOL. +0.13 MIN. TOL. -0.13 NOMINAL NOMINAL NOMINAL NOMINAL NOMINAL MIN. MAX. 1206 3.06 1.60 0.40 1.215 0.63 0.50 0.76 1505 3.81 1.32 0.48 1.59 2010 5.08 2.54 2.215 2512 6.30 3.30 2.835 SUGGESTED LAND PATTERN (Option 0063) CHIP SIZE DIMENSIONS (IN MILLIMETER) Zmax. Gmin. Xmax. 1206 3.91 0.50 1.73 1505 4.66 1.45 2010 5.93 2.67 2512 7.15 3.43 A B D E F Enlarged termination Uncoatted ceramic Bottom view for mounting Gmin. Zmax. Xmax.

P www.vishay.com Vishay Sfernice Revision: 20-Feb-15 6 Document Number: 53017 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Option: Marking Option to order 0013 :  Marking of ohmic value and tolerance: Sizes: 0805 to 1005: 3 digits marking (according to EIA-96) Sizes: 1206 to 2512: 4 digits marking (same codification than in the ordering procedure) Tolerance indicated by a color dot. Option to order 0014 :  Marking of ohmic value: Sizes: 0805 to 1005: 3 digits marking (according to EIA-96)  Sizes: 1206 to 2512: 4 digits marking (same codification than in the ordering procedure)  No standard marking available for smaller sizes.  A price adder will apply to the unit price of the parts for options 0013 and 0014. Option: AEC-Q200 For moisture resistance test only. Option to Order 0058 Specific production process to withstand 85 °C/85 % at Pn/10 PACKAGING ESD packaging available: waffle-pack, and plastic tape and reel (low conductivity). Paper tape available in standard (for size 0402) and upon request (ESD only) (for size 0603, 0805, and 1206). PACKAGING RULES Waffle Pack Can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. When quantity ordered exce eds maximum quantity of a single waffle pack, the waffle packs are stacked up on the top of each other and closed by one single cover. To get “not stacked up” waffle pack in case of ordered quantity > maximum number of pieces per package: Please consult Vish ay Sfernice for sp ecific ordering code. Tape and Reel See Part Numbering information to get the quantity desired by tape. Notes (1) Option to order 0058. (2) Typical drift ± 0.02 % at Pd. SIZE MOQ NUMBER OF PIECES PER PACKAGE TAPE WIDTHWAFFLE PACK 2" × 2" TAPE AND REEL MIN. MAX. 0302 250 340 100 5000 8 mm 0402 100 0505 100 4000 0603 5000 0805 40001005 221 1206 140 1505 602010 20002512 50 PERFORMANCE TESTS CONDITIONS MIL OR CECC REQUIREMENTS TYPICAL PERFORMANCES Thermal shock MIL-PRF-55342G MIL-STD-202 F-Method 107 F ± 0.05 % ± 0.02 % Short time overload MIL-PRF-55342G Low temperature operation MIL-PRF-55342G Resistance to solder heat MIL-PRF-55342G Moisture resistance MIL-PRF-55342G PARA 3.13 and 4.7.8 MIL-STD-202 F-Method 106 E ± 0.10 % ± 0.01 % CECC 56 days/40 °C/93 % RH ± 0.10 % ± 0.01 % AEC-Q200 (1) High temperature MIL-PRF-55342G Load life MIL-PRF-55342G 8000 h Pn at 70 °C MIL-STD-202 F-Method 108 A

P www.vishay.com Vishay Sfernice Revision: 20-Feb-15 7 Document Number: 53017 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) One should apply the datas mentioned on the 3 curves together to get the right performances. Maximum permissible pulse load Pi max. for single pulse (1) Energy for single pulse (1) Maximum permissible pulse voltage Ui max. for single pulse (1) 0.1 100 Pulse Duration t (s) Permissible Pulse Power (W) P2512 P2010 P1206 P0805 P0603 P0402 P 0.00001 100 Pulse Duration t (s) Permissible Pulse Energy (J) P2512 P2010 P1206 P0805 P0603 P0402 0.0001 0.001 0.01 0.1 100 1000 10 000 Pulse Duration t (s) Permissible Pulse Voltage (V) P2512 P2010 P1206 P0805 P0603 P0402

P www.vishay.com Vishay Sfernice Revision: 20-Feb-15 8 Document Number: 53017 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Maximum permissible pulse load Pi max. 1.2/50 μs lightning surge 10/700 μs lightning surge 0.1 100 Pulse Duration t (s) P2512 P2010 P1206 P0805 P0603 P0402 Permissible Pulse Power (W) P 100 1000 10 000 Resistor Value (Ω) Test Voltage (V) 10 100 1000 10 000 100 000 P2512 P1206 P0805 P0603 100 1000 10 000 Resistor Value (Ω) Test Voltage (V) 10 100 1000 10 000 100 000 P2512 P2010 P1206 P0805 P0603

P www.vishay.com Vishay Sfernice Revision: 20-Feb-15 9 Document Number: 53017 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FAST TRACK SERVICE Vishay Sfernice offers fast track service - For conditions and availability please contact you Customer Service Representative. PTRIM Chips ready to be trimmed available. Please consult Vishay Sfernice. Notes

  • For CECC qualified, see RV datasheet (www.vishay.com/doc?60022
  • For ESCC qualified, see PHR datasheet ( www.vishay.com/doc?53037) or PFRR datasheet (www.vishay.com/doc?53046)
  • For High Temperature (230 °C), see PHT datasheet (www.vishay.com/doc?53050)
  • F o r S t r a p ( 0 ), see PZR datasheet (www.vishay.com/doc?53053) GLOBAL PART NUMBER INFORMATION New Global Part Numbering: P0505Y1003BBT0999 GLOBAL MODEL SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION P 0302 0402 0505 0603 0805 1005 1206 1505 2010 2512 K = ± 100 ppm/°C H = ± 50 ppm/°C E = ± 25 ppm/°C Y = ± 10 ppm/°C Z = ± 5 ppm (0.70 °C) C = ± 5 ppm The first three digits are significant figures and the last digit specifies the number of zeros to follow, R designates decimal point 10R0 = 10  3901 = 3900  1004 = 1 M L = ± 0.01 % P = ± 0.02 % W = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1 % G = ± 2 % J = ± 5 % B: SnPb over nickel barrier N: SnAg over nickel barrier G: Gold over nickel barrier For more information see “Codification of packaging” table From 1 to 3 digits, leave blank if no option B: Lead bearing version N and G: Lead (Pb)-free/RoHS version Historical Part Number examples: P1206Y1001LNT100 (tapes of 100 pieces) P1206H7151FBT250 (tapes of 250 pieces) P1206Y1503WNT1K032 (tapes of 1000 pieces and option 32) P1206Y2372BG (waffle pack) Historical part numbers are not recommended, but can still be used for ordering. CODIFICATION OF PACKAGING CODE 18 PACKAGING WAFFLE PACK W 100 min., 1 mult WA 100 min., 100 mult (availab le only in size 1206) PLASTIC TAPE (in standard for all sizes except 0402) T 100 min., 1 mult TA 100 min., 100 mult TB 250 min., 250 mult TC 500 min., 500 mult TD 1000 min., 1000 mult TE 2500min., 2500 mult TF Full tape (quantity depending on size of chips) PAPER TAPE (Available for 0603, 0805, and 1206. Please consult Vishay Sfernice for other sizes.) PT 100 min., 1 mult PA 100 min., 100 mult PB 250 min., 250 mult PC 500 min., 500 mult PD 1000 min., 1000 mult PE 2500min., 2500 mult PF Full tape (quantity depe nding on size of chips) 0505Y1003P BBT 9 99

www.vishay.com Vishay Revision: 02-Oct-12 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain type s of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. Parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vish ay’s terms and condit ions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicate d in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vi shay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certi fies that all its products that are id entified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The Euro pean Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We co nfirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.