P10D ETC2

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

10W DC-DC Converter P10D-Series

  • Wide 4:1 input range
  • Efficiency up to 85 %
  • 1500 V DC isolation
  • Continuous short circuit protection
  • Standard package 2” x 1” x 0.4”
  • MTBF 1.12 M hours
  • Wide Operating Temper ature Range -40..+85°C Model selection guide Typ Input nominal voltage [VDC] Input quiescent current [mA] Output voltage [VDC] Output current [mA] Efficiency typ. [%] capacitive load [µF] Single output P10D243R3S 9...36 25 3.3 2000 79 3300 P10D2405S 9...36 25 5.0 2000 82 3300 P10D2412S 9...36 25 12.0 833 85 680 P10D2415S 9...36 25 15.0 666 85 470 P10D483R3S 18...72 20 3.3 2000 78 3300 P10D4805S 18...72 20 5.0 2000 83 3300 P10D4812S 18...72 20 12.0 833 85 680 P10D4815S 18...72 20 15.0 666 85 470 Dual output P10D2405D 9...36 25 ±5.0 ±1000 82 2 x 2200 P10D2412D 9...36 25 ±12.0 ±416 85 2 x 470 P10D2415D 9...36 25 ±15.0 ±333 85 2 x 330 P10D4805D 18...72 20 ±5.0 ±1000 82 2 x 2200 P10D4812D 18...72 20 ±12.0 ±416 85 2 x 470 P10D4815D 18...72 20 ±15.0 ±333 85 2 x 330 Page 1 of 2 Deutschland: Schweiz: Inselkammerstraße 10 Gründenstrasse 82 D-82008 Unterhaching CH-8247 Flurlingen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch

10W DC-DC Converter P10D-Series Specifications Input Voltage range 24 V DC, 9…36 V DC

48 VDC, 18…72 V DC

Isolation Voltage: Input to Output 1,5 kV DC for 1 min., test 1s Input/Output to Case 1000 V DC for 1 min. Resistance 10 9 Ω Capacitance 1200 pF, typ. Output Voltage accuracy ± 1% Load voltage regulation ± 0.5%, at 10..100% load Line voltage regulation ± 0.5%, max. Over current protection 140% of max. Iout Short circuit protection Continuous Short circuit restart Automatic Ripple and noise (at 20 MHz BW) 75 mVp-p, max. Temperature coefficient ± 0.02% / °C Dimensions Output ripple and noise reduction Page 2 of 2 General Switching frequency 200 kHz, typ. Safety standard in accordance with IEC60950-1 : 2001 Environmental Operating temperatur (ambient) -40 °C...+85 °C Case temperature 100 °C, max. Storage temperature -40 °C...+125 °C Derating None required Humidity Up to 95%, non-condensing Cooling Free-air convection Physical Dimensions 50.80 x 25.40 x 10.16 mm Weight 30.0 g Case material Nickel-coated copper Potting material Epoxy (UL94V-0 rated) Pin material Brass solder coated Soldering temperature 1.5mm distance from case 260°C for 10s Life Support Policy : HY-LINE does not authorize the use of any of its products for use in life s upport devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 2 / 07f Deutschland: Schweiz: Inselkammerstraße 10 Gründenstrasse 82 D-82008 Unterhaching CH-8247 Flurlingen Tel.: 089 614 503-10 Tel.: 052 647 42 00 E-Mail: power@hy-line.de E-Mail: power@hy-line.ch To reduce ripple and noise, it is recommended to use 4.7µF capacitors to the output Scope Load +input +output DC/DC - Converter -input -output DC Power Source COM / no Pin COM / no Pin