P10 VISHAY

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

www.vishay.com For technical ques tions, contact: sfer@vishay.com Document Number: 51030 P10 Vishay Sfernice 3/8" Square Potentiometers Cermet Fully Sealed P10 panel potentiometer combines the very good setting stability offered by VISHAY SFERNICE trimmers (due to their proprietary multifinger wip er), with a mechanical life of 10 000 cycles. It is an ideal choice to set and control parameters such as temperature, time, volume levels, etc.

FEATURES

  • Industrial Grade
  • 0.5 W at 70 °C
  • Miniature compact
  • Plastic housing and shaft
  • Fully sealed
  • 7 standard pin styles
  • 10 000 cycles rotational life DIMENSIONS in millimeters P10 side adjust * to be measured at base level P10 top adjust CIRCUIT DIAGRAM Tolerance unless otherwise specified ± 0.5 RoHS COMPLIANT 4 min ø 0.5 5.5 9.7 9.6 2.54*2.54* 2.54* 1.15* 5.3 5.2 ø 3 AI = R = 20 AG = D = 16 2.7* 2.54* 2.54* 2.54* 2.54* 2.54* 1.15* 2.7* 2.54* 2.54*3 P10XX P10XC P10XW P10XH 9.6 5.5 9.7 5.2 ø 0.5 4 min ø 3 5.3 M 6 × 0.75 AI = R = 20 AG = D = 16 2.54* 2.54* 2.54* 2.54* 2.54* 2.54* 2.54* 4.85 2.54* 2.54* 2.25* 5.08* P10YE P10YM P10YP a c b cw (2) (3)(1)

Document Number: 51030 For technica l questions, contact: sfer@vishay.com www.vishay.com Revision: 02-Jul-07 109 P10 3/8" Square Potentiometers Cermet Fully Sealed Vishay Sfernice MECHANICAL SPECIFICATIONS Mechanical Travel 290° ± 5° Operating Torque (max. Ncm) 2 End Stop Torque (max. Ncm) 7 Tightening Torque (max. Ncm) 25 Unit Weight (max. g) 1 ENVIRONMENTAL SPECIFICATIONS Temperature Range - 55 °C to + 125 °C Climatic Category 55/100/56 Sealing fully sealed container IP67 POWER RATING CHART ELECTRICAL SPECIFICATIONS Resistive Element cermet Electrical Travel 250° ± 15° Resistance Range 100 Ω to 2 MΩ Standard series 1 - 2 - 5 Tolerance Standard ± 10 % On Request ± 5 % Power Rating Linear 0.5 W at + 70 °C Logarithmic not applicable Temperature Coefficient See Standard Resistance Element Table Limiting Element Voltage (Linear Law) 250 V Contact Resistance Variation 1 % Rn or 2 Ω End Resistance (Typical) 1 Ω Dielectric Strength (RMS) 1000 V Insulation Resistance 106 MΩ 0 50 100 155 0.5 AMBIENT TEMPERA TURE IN °C POWER IN W 70 125 25 PERFORMANCE TESTS CONDITIONS TYPICAL VALUES AND DRIFTS ΔRT RT (%) ΔR1-2 R1-2 (%) Load Life 1000 hours at rated power 90’/30’ - ambient temperature 70 °C ± 1 % ± 2 % Contact res. variation: < 1 % Rn Climatic Sequence Phase A dry heat 100 °C Phase B damp heat Phase C cold - 55 °C Phase D damp heat 5 cycles ± 1 % ± 2 % Long Term Damp Heat 56 days 40 °C, 93 % RH ± 1 % ± 2 % Dielectric strength: 1000 V RMS Insulation resistance: > 10 4 MΩ Rapid Temperature Change 5 cycles - 55 °C at + 125 °C ± 1 % ΔV1-2 V1-3 ≤ ± 2 % Shock 50 g at 11 m secs 3 successive shocks in 3 directions ± 0.5 % ± 1 % Vibration 10 - 55 Hz 0.75 mm or 10 g during 6 hours ± 0.5 % ΔV1-2 V1-3 ≤ ± 1 % Rotational Life 10 000 cycles ± 3 % Contact res. variation: < 2 % Rn

www.vishay.com For technical ques tions, contact: sfer@vishay.com Document Number: 51030 P10 Vishay Sfernice 3/8" Square Potentiometers Cermet Fully Sealed MARKING Printed: – VISHAY trademark – model – ohmic value – manufacturing date – pin 3 The ohmic value is indicated by a 3 figures code: the first two digits are significant figures, the third digit is the multiplier: Example: 101 = 100 Ω 102 = 1000 Ω 503 = 50 000 Ω The manufacturing date is indicated by a 4 figures code. The first two digits are the year, the last two digits are the week. SHAFTS Standard shaft 20 mm length (R or AI code) and 16 mm length (D or AG code) is measured from the mounting face to the free end of the shaft. Vishay guarantee is lost if t he customer modifies the shaft himself. HARDWARE Nuts and washer are supplied seperately (not mounted on the potentiometer) in a small bag placed in the packaging. STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES LINEAR LAW TYPICAL TCR - 55 °C + 125 °C MAX. POWER AT 70 °C MAX. WORKING VOLTAGE MAX. CUR. THROUGH WIPER Ω WV m A p p m / ° C 100 200 500 10K 20K 50K 100K 200K 500K 0.5 0.5 0.28 0.13 0.06 0.028 7.0 10.0 15.8 22.4 31.8 50.0 70.7 100 158 224 250 250 250 250 7.0 5.0 3.2 2.2 1.3 0.5 0.25 0.13 ± 150 PACKAGING – Carton boxes of 100 pieces

ORDERING INFORMATION

R AXE 500 kΩ OHMIC VALUE ± 10 % TOLERANCE BO100 PACKAGING LEAD FINISH XX YP XH YE XC YM XW R = AI = 20 mm D = AG = 16 mm e3: pure Sn SAP PA RT NUMBERING GUIDELINES P1 0X XA I50 4 KB 30 MODE L STYLE OHMI C V ALU E TO L PA CKAGIN G CODE SPECIAL (IF APPLICABLE) See the end of this data book for conversion tables SHAFT

Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1 Disclaimer Legal Disclaimer Notice Vishay All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all li ability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permit ted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.