P002-1-036X

P006 ENSIGN

Document overview

• PDF pages: 3

Technical content

Page 1



Flame Retardant Materials

Flame Retardant, UL 94V0 Rating

 High Efficiency

 1.1 VA to 36 VA Power Rating

 Single or Dual Primary, 115V, 115/230V or 230V

(Optional 120V, 120/240V or 240V)  50/60Hz (Economy 60Hz-only Models Available)

 Dual Secondary (Optional Single or Center-tapped)

 Any Secondary Voltage from 5V to 120V in 1V Increments

 Insulation Material 130oC Standard (Optional 200oC)

 Optional Internal Current or Thermal Protectors

 High Isolation, 2500V, 100% Tested

 Low Capacitive Coupling, no Electrostatic Shield Needed

Agency Approvals:

 UL/cUL 5085-2 Recognized (File E47299)

 UL 1446 Recognized Insulation System (File E95662)

 UL/cUL 5085-3 Class 2 Recognized (File E43609), Only P001 (up to 20V) & P002 (up to 24V)

Secondary Schematics

Primary Schematics

Single Input Series/Parallel Input

Single Output Center-Tapped

Series/Parallel

(Specify 115V, 120V, (Specify 115/230V

Output

Output

230V or 240V)

or 120/240V)

\* = Slots

Take advantage of these pre-designed models, or let us customize to your requirements. That’s our specialty.

300 W Factory Rd., Addison, IL 60101 • Ph: (630) 628-9999 • Fax: (630) 628-9922 • www.ensigncorp.com 6

Page 2

Partial Selection Guide (Standard Stock)

Models marked with \* are also UL 5085-3 Class 2 recognized (see Page 9)

Over 95,000 additional Captain Class model configurations available! Refer to the Part Numbering Scheme on the next page to configure your own part with following options:

 Primary: 120V, 120/240V, or 240V



With or without current or thermal protector(s)





Secondary: 5V to 120V, in 1V increments

Temperature Class: 130C, or 200C

 Frequency: 50/60Hz, or economy 60Hz-only

Take advantage of these pre-designed models, or let us customize to your requirements. That’s our specialty.

300 W Factory Rd., Addison, IL 60101 • Ph: (630) 628-9999 • Fax: (630) 628-9922 • www.ensigncorp.com 7

Page 3

Class 2

Examples: P006-2-724X = 6VA, Dual 115/230V (series/parallel) Primary, 50/60Hz, no internal protector, Single 24V Secondary P006-2-724 = Same as above except 120/240V Primary P006-1A024 60HZ = 6VA, Single 120V Primary, 60Hz only, 130C thermal cutoff, Dual 12/24V (series/parallel) Secondary

PXXX

-X

X XXX

X

XXXX

Printed Circuit Mount

Rating:

P001 = 1.1VA, models up to 20V are also Class 2 (see Page 9)

P002 = 2.4VA, models up to 24V are also Class 2 (see Page 9)

P006 = 6VA

P012 = 12VA

P020 = 20VA

P036 = 36VA

Primary Voltage:

-1 = 120V

-2 = 120/240V Dual (series / parallel)

-3 = 240V

Optional Internal Protector:

• (dash) = No internal protector

A through Z = Over-current and/or over-temperature protection (Contact for list of available protectors) Secondary Voltage (10V through 120V, in 1V Increments):

010 through 120 = Dual Secondary (series / parallel) Number represents the voltage of the series connection. Example: “024” = 12V (parallel) / 24V (series)

510 through 620 = Center-tapped Secondary Number represents the total voltage plus 500. Example: “524” = 24V with center-tap (12V on each side)

710 through 820 = Single Secondary Number represents the voltage plus 700. Example: “724” = 24V

Indication of Adjustment in Primary Voltage:

Blank = 120V, 120/240V or 240V, as selected above

X = 115V instead of 120V and/or 230V instead of 240V

Frequency:

Blank = 50/60Hz

-60HZ = Economy 60Hz-only

Take advantage of these pre-designed models, or let us customize to your requirements. That’s our specialty.

300 W Factory Rd., Addison, IL 60101 • Ph: (630) 628-9999 • Fax: (630) 628-9922 • www.ensigncorp.com 8