DATASHEET SEARCH SITE
Document overview
- PDF pages: 4
Technical content
Page 1
NPI-12 Series
Stainless Steel Media Isolated Sensors
Applications
- Low-cost media isolation
- 0.20 mV/V/psi sensitivity
- Operating temperature 50°F to 104°F (10°C to 40°C)
- 5 VDC excitation
- Four-pin connector
- Solid state reliability
Amphenol
Advanced Sensors

Features
- Level sensing
- Automotive systems
- Process control
- Pneumatic controls
- Hydraulic systems
Page 2
NPI-12 Series Specifications
Description
The NPI-12 Series of solid state, media isolated pressure
Parameter
sensors are designed to provide a cost effective
General
solution for applications that detect tube blockages
Pressure Range
and pump performance. The NPI-12 Series is intended
Maximum Overpressure Environmental
to mount adjacent to flexible tubing to sense tube
Temperature Range
expansion. Cleanliness is assured with the NPI-12 Series
Operating
stainless steel finish.
Storage Mechanical Weight
The NPI-12 Series incorporates state-of-the-art
Media Compatibility
IsoSensor technology, which gives the OEM user the
Diaphragm Dome Height
best in price and performance. They are designed to operate in hostile environments while providing
Electrical(2)
outstanding sensitivity, linearity and hysteresis. The
Excitation
piezoresistive sensor chip is housed in a fluid filled
Parameter
cavity and isolated from the measured media by
Value
Units Notes
15
psig
50
psig
50 to 104
°F (10°C to 40°C)
–40 to 158 (Dry) °F
(-40°C to 70°C)
0.01
lb (5 g)
316L stainless steel 0.000 to 0.008 in
1
(0.000 mm to 0.20 mm)
5.0
volts
Units Min. TypicaL Max. Notes
Performance Parameters (2)
a stainless steel diaphragm and body. As with all
Zero Pressure Output
±%FSO —
— 5
NovaSensor silicon sensors, the NPI-12 Series employs Sensitivity
mV/V/psi 0.19 0.20
0.21
SenStable® processing technology, which provides
Linearity, Hysteresis, Temperature Errors
±%FSO —
— 4.0 3
excellent output stability.
Response Time (10% to 90%) ms
— 1.0 — 4
The NPI-12 Series offers many features with superior
- Maximum change in diaphragm height relative to the edge of the sensor.
performance. The pressure sensitivity is calibrated at
- Supply current = 5 VDC and ambient temperature = 77°F (25°C), unless otherwise
0.20±0.01 mV/V/psi. The combined errors of linearity,
noted. 3. Best fit straight line.
pressure hysteresis, repeatability and temperature are
- For a zero-to-full scale pressure step change.
less than ±4 %FSO. The maximum overpressure is 50 psi (3.44 bar). A five volt excitation is needed to supply power to the device. The operating temperature range
for the NPI-12 Series is 50°F to 104°F (10°C to 40°C), while the storage temperature is -40°F to 158°F (–40°C to 70°C). Electrical connection is accomplished with a 4
pin connector that accepts standard 0.025 in (0.64 mm)

square posts on 0.100 in (2.54 mm) centers. A red wire allows for easy recognition of connector orientation.

NPI-12 Series schematic diagram
NPI-12 Series dimensions
Page 3
NPI-12 Series Specifications
Warranty
NovaSensor warrants its products against defects in material and workmanship for 12 months from the date of shipment . Products not subjected to misuse will be repaired or replaced. NovaSensor reserves the right to make changes without further notice to any products herein. NovaSensor makes no warranty, representation or guarantee regarding the suitability of its products for any particular application, nor does NovaSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims and all liability without limitation consequential or incidental damages. The foregoing warranties are exclusive and in lieu of all other warranties, whether written, oral, implied or statutory.
No Implied statutory warranty of merchantability or fitness for particular purpose shall apply.
Ordering Information
Part Number
Description
NPI-12-101GH
15 psi (1.03 bar)
Page 4
Amphenol
www.amphenol-sensors.com
© 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice.
Advanced Sensors
Other company names and product names used in this document are the registered trademarks or trademarks of their respective owners.