N2990

N413 ETC

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

Datasheet sections

• 1 Scope
• 2 Conformance
• 3 Normative references
• 4 Definitions
• 5 Notation, code table and character names
• 6 Specification of the coded character set
• 7 Identification of the character set

,62,(&-7&6&1 ,62,(&-7&6&:*1 /G27/G44/G57/G48 /G1D /G14 /G1C/G1C/G1B /G10/G13/G15 /G10/G14/G15 /G26/G52/G51/G57/G44/G46/G57 /G14/G1D /G36/G48/G46/G55/G48/G57/G44/G55/G4C/G44/G57 /G2C/G36/G32/G12/G2C/G28/G26 /G2D/G37/G26 /G14/G12/G36/G26 /G15/G12/G3A/G2A /G16 /G28/G2F/G32/G37 /G30/G55/G56 /G2E/G11/G39/G48/G4F/G4F/G4C /G0B/G44/G46/G57/G4C/G51/G4A/G0C /G24/G46/G4B/G44/G55/G51/G52 /G51 /G16/G14/G16/G0F /G14 /G14/G14 /G17/G18 /G2E/G44/G57/G52 /G33 /G44/G57/G4C/G56/G56/G4C/G44/G0F /G24/G37/G2B/G28/G31/G36 /GB1 /G2A/G35/G28/G28/G26/G28 /G37/G48/G4F/G1D /G0E/G16 /G13 /G14 /G15/G15 /G1B /G13 /G13/G13 /G14 /G29/G44/G5B /G1D /G0E/G16/G13 /G14 /G15 /G15 /G1B /G19 /G15/G14 /G1C /G28/G10/G50/G44/G4C /G4F /G1D /G4E/G4E/G45 /G23/G48/G4F/G52/G57/G11 /G4A/G55 /G26/G52/G51/G57/G44/G46 /G57 /G15 /G1D /G26/G52/G51 /G59/G48 /G51/G52/G55 /G2C/G36/G32/G12/G2C/G28/G26 /G2D/G37/G26 /G14/G12/G36/G26 /G15/G12/G3A/G2A /G16 /G30/G55 /G28 /G11/G30/G48/G4F/G44/G4A/G55/G44/G4E/G4C/G56 /G24/G46/G4B/G44/G55/G51/G52 /G51 /G16/G14/G16/G0F /G14 /G14/G14 /G17/G18 /G2E/G44/G57/G52 /G33 /G44/G57/G4C/G56/G56/G4C/G44/G0F /G24/G37/G2B/G28/G31/G36 /GB1 /G2A/G35/G28/G28/G26/G28 /G37/G48/G4F/G1D /G0E/G16 /G13 /G14 /G15/G15 /G1B /G13 /G13/G13 /G14 /G29/G44/G5B /G1D /G0E/G16/G13 /G14 /G15 /G15 /G1B /G19 /G15/G14 /G1C /G28/G10/G50/G44/G4C /G4F/G1D /G48/G48 /G50 /G23/G48/G4F/G52/G57/G11 /G4A/G55 ,62,(&-7&6&:* ELWDQGELWFRGHVDQGWKHLUH[WHQVLRQ 6(&5(7$5,$7 (/27 /G27/G32/G26 /G37/G3C/G33/G28 /G1D )LQDO7H[W6XEPLWWHGIRU,6SXEOLFDWLRQ /G37/G2C/G37/G2F/G28 /G1D )LQDO7H[WRI’,6 ,QIRUPDWLRQ7HFKQRORJ\\ELW VLQJOHE\\WHFRGHGJUDSKLFFKDUDFWHUVHWV3DUW /DWLQ DOSKDEHW1R /G36/G32/G38/G35/G26/G28 /G1D 0U.,/DUVVRQ3URMHFW(GLWRU /G33/G35/G32/G2D/G28/G26/G37/G1D -7& /G36/G37/G24/G37/G38/G36 /G1D ,QDFFRUGDQFHZLWK5HVROXWLRQ0DGRSWHGDWWKHWK 3OHQDU\\PHHWLQJRI6&KHOGLQ&UHWH*UHHFHWKLVGRFXPHQW LVVXEPLWWHGWR,77)WRJHWKHUZLWK’LVSRVLWLRQRI&RPPHQWV 5HSRUWFRQWDLQHGLQ1 IRUSXEOLFDWLRQSURFHVVLQJ /G24/G26/G37/G2C/G32/G31 /G2C/G27 /G1D )<, /G27/G38/G28 /G27/G24/G37/G28 /G1D /G27/G2C/G36/G37/G35/G2C/G25/G38/G37/G2C/G32/G31 /G1D 32DQG/0HPEHUVRI,62,(&-7&6& :*&RQYHQHUV6HFUHWDULDWV :*0HPEHUV ,62,(&-7&6HFUHWDULDW ,62,(&,77) /G30/G28/G27/G2C/G38/G30 /G1D 3 /G31/G32 /G32/G29 /G33/G24/G2A/G28/G36 /G1D

© ISO/IEC ISO/IEC 8859-4:1997 (E) TITLE PAGE FINAL TEXT 1997-11-11 To be provided by ITTF

© ISO/IEC ISO/IEC 8859-4:1997 (E) Foreword FINAL TEXT 1997-11-11 ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and nongovernmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75% of the national bodies casting a vote. International Standard ISO/IEC 8859-4 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 2,Character sets and information coding. ISO/IEC 8859 consists of the following parts, under the general title Information technology – 8-bit single-byte coded graphic character sets: – Part 1: Latin alphabet No. 1 – Part 2: Latin alphabet No. 2 – Part 3: Latin alphabet No. 3 – Part 4: Latin alphabet No. 4 – Part 5: Latin/Cyrillic alphabet – Part 6: Latin/Arabic alphabet – Part 7: Latin/Greek alphabet – Part 8: Latin/Hebrew alphabet – Part 9: Latin alphabet No. 5 – Part 10: Latin alphabet No. 6 Annexes A to C of this part of ISO/IEC 8859 are for information only. iii

ISO/IEC 8859-4:1997 (E) © ISO/IEC Introduction FINAL TEXT 1997-11-11 ISO/IEC 8859 consists of several parts. Each part specifies a set of up to 191 graphic characters and the coded representation of these characters by means of a single 8-bit byte. Each set is intended for use for a particular group of languages. iv

INTERNATIONAL STANDARD © ISO/IEC ISO/IEC 8859-4:1997 (E) FINAL TEXT 1997-11-11 Information technology – 8-bit single-byte coded graphic character sets – Part 4: Latin alphabet No. 4

1 Scope

This part of ISO/IEC 8859 specifies a set of 191 coded graphic characters identified as Latin alphabet No. 4. This set of coded graphic characters is intended for use in data and text processing applications and also for information interchange. The set contains graphic characters used for general purpose applications in typical office environments in at least the following languages: Danish, English, Estonian, Finnish, German, Greenlandic, Latin, Latvian, Lithuanian, Norwegian, Sámi (but see Annex A.1, Notes), Slovene and Swedish. This set of coded graphic characters may be regarded as a version of an 8-bit code according to ISO/IEC 2022 or ISO/IEC 4873 at level 1. This part of ISO/IEC 8859 may not be used in conjunction with any other parts of ISO/IEC 8859. If coded characters from more than one part are to be used together, by means of code extension techniques, the equivalent coded character sets from ISO/IEC 10367 should be used instead within a version of ISO/IEC 4873 at level 2 or level 3. The coded characters in this set may be used in conjunction with coded control functions selected from ISO/IEC 6429. However, control functions are not used to create composite graphic symbols from two or more graphic characters (see clause 6). NOTE – ISO/IEC 8859 is not intended for use with Telematic services defined by ITU-T. If information coded according to ISO/IEC 8859 is to be transferred to such services, it will have to conform to the requirements of those services at the access-point.

2 Conformance

2.1 Conformance of information interchange

A coded-character-data-element (CC-data-element) within coded information for interchange is in conformance with this part of ISO/IEC 8859 if all the coded representations of graphic characters within that CC-data-element conform to the requirements of clause 6.

2.2 Conformance of devices

A device is in conformance with this part of ISO/IEC 8859 if it conforms to the requirements of of conformance shall identify the document which contains the description specified in 2.2.1.

2.2.1 Device description

A device that conforms to this part of ISO/IEC 8859 shall be the subject of a description that identifies the means by which the user may supply characters to the device, or may recognize them when they are made available to him, as specified respectively in

2.2.2 Originating devices

An originating device shall allow its user to supply any sequence of characters from those specified in clause 6, and shall be capable of transmitting their coded representations within a CC-data-element.

2.2.3 Receiving devices

A receiving device shall be capable of receiving and interpreting any coded representations of characters that are within a CC-data-element, and that conform to clause 6, and shall make the corresponding characters available to its user in such a way that the user can identify them from among those specified there, and can distinguish them from each other.

3 Normative references

The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO/IEC 8859. At the time of publica- tion, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO/IEC 8859 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.

ISO/IEC 8859-4:1997 (E) © ISO/IEC ISO/IEC 2022:1994, Information technology – FINAL TEXT 1997-11-11 Character code structure and extension techniques. ISO/IEC 4873:1991, Information technology – ISO 8-bit code for information interchange – Structure and rules for implementation. ISO/IEC 8824-1:1995, Information technology – Abstract Syntax Notation One (ASN.1): Specifica- tion of basic notation.

4 Definitions

For the purposes of this part of ISO/IEC 8859 the following definitions apply: 4.1 bit combination:An ordered set of bits used for the representation of characters. 4.2 byte: A bit string that is operated upon as a unit. 4.3 character: A member of a set of elements used for the organization, control, or representation of data. 4.4 code table: A table showing the characters allocated to each bit combination in a code. 4.5 coded character set; code: A set of unambiguous rules that establishes a character set and the one-to-one relationship between the characters of the set and their bit combinations. 4.6 coded-character-data-element (CC-data- element): An element of interchanged information that is specified to consist of a sequence of coded representations of characters, in accordance with one or more identified standards for coded character sets. 4.7 graphic character:A character, other than a control function, that has a visual representation normally handwritten, printed or displayed, and that has a coded representation consisting of one or more bit combinations. NOTE – In ISO/IEC 8859 a single bit combination is used to represent each character. 4.8 graphic symbol: A visual representation of a graphic character or of a control function. 4.9 position: That part of a code table identified by its column and row coordinates.

5 Notation, code table, and names

5.1 Notation

The bits of the bit combinations of the 8-bit code are identified by b 8,b7,b6,b5,b4,b3,b2, and b1, where b8 is the highest-order, or most-significant bit and b1 is the lowest-order, or least-significant bit. The bit combinations may be interpreted to represent numbers in binary notation by attributing the following weights to the individual bits: Using these weights, the bit combinations are Bit b8 b7 b6 b5 b4 b3 b2 b1 Weight 128 64 32 16 8 4 2 1 identified by notations of the form xx/yy, where xx and yy are numbers in the range 00 to 15. The correspondence between the notations of the form xx/yy and the bit combinations consisting of the bits b 8 to b1 is as follows: – xx is the number represented by b8,b7,b6 and b5 where these bits are given the weights 8, 4, 2, and 1 respectively. – yy is the number represented by b4,b3,b2 and b1 where these bits are given the weights 8, 4, 2, and 1 respectively. The bit combinations are also identified by notations of the form hk, where h and k are numbers in the range 0 to F in hexadecimal notation. The number h is the same as the number xx described above, and the number k the same as the number yy described above.

5.2 Layout of the code table

An 8-bit code table consists of 256 positions arranged in 16 columns and 16 rows. The columns and the rows are numbered 00 to 15. In hexa- decimal notation the columns and the rows are numbered 0 to F. The code table positions are identified by notations of the form xx/yy, where xx is the column number and yy is the row number. The column and row numbers are shown at the top and left edges of the table respectively. The code table positions are also identified by notations of the form hk, where h is the column number and k is the row number in hexadecimal notation. The column and row numbers are shown at the bottom and right edges of the table respectively. The positions of the code table are in one-to-one correspondence with the bit combinations of the code. The notation of a code table position, of the form xx/yy, or of the form hk, is the same as that of the corresponding bit combination.

5.3 Names and meanings

This part of ISO/IEC 8859 assigns a unique name and a unique identifier to each graphic character. These names and identifiers have been taken from

© ISO/IEC ISO/IEC 8859-4:1997 (E) ISO/IEC 10646-1 (E). This part of ISO/IEC 8859 also specifies an acronym for each of the characters SPACE, NO-BREAK SPACE and SOFT HYPHEN. For acronyms only Latin capital letters A to Z are used. It is intended that the acronyms be retained in all translations of the text. Except for SPACE (SP), NO-BREAK SPACE (NBSP) and SOFT HYPHEN (SHY), this part of ISO/IEC 8859 does not define and does not restrict the meanings of graphic characters. This part of ISO/IEC 8859 specifies a graphic symbol for each graphic character. This symbol is shown in the corresponding position of the code table. However, this part, or any other part, of ISO/IEC 8859 does not specify a particular style or font design for imaging graphic characters. Annex B of ISO/IEC 10367 gives further information on this subject.

5.3.1 SPACE (SP)

A graphic character the visual representation of which consists of the absence of a graphic symbol.

5.3.2 NO-BREAK SPACE (NBSP)

A graphic character the visual representation of which consists of the absence of a graphic symbol, for use when a line break is to be prevented in the text as presented.

5.3.3 SOFT HYPHEN (SHY)

A graphic character that is imaged by a graphic symbol identical with, or similar to, that representing HYPHEN, for use when a line break has been established within a word.

6 Specification of the coded character set

This part of ISO/IEC 8859 specifies 191 characters allocated to the bit combinations of the code table (table 2). None of these characters are combining characters. NOTE – Combining characters are described in ISO/IEC 2022:1994 subclause 6.3.3. Control functions, such as BACKSPACE or CARRIAGE RETURN, shall not be used to create composite graphic symbols, which are made up from the graphic representations of two or more characters.

6.1 Characters of the set and their coded

See table 1. Table 1 – Character set, coded representation FINAL TEXT 1997-11-11 Bit combi- nation Hex IdentifierName U+0020 U+0021 U+0022 U+0023 U+0024 U+0025 U+0026 U+0027 U+0028 U+0029 U+002A U+002B U+002C U+002D U+002E U+002F U+0030 U+0031 U+0032 U+0033 U+0034 U+0035 U+0036 U+0037 U+0038 U+0039 U+003A U+003B U+003C U+003D U+003E U+003F U+0040 U+0041 U+0042 U+0043 U+0044 U+0045 U+0046 U+0047 U+0048 U+0049 U+004A U+004B U+004C U+004D U+004E U+004F U+0050 U+0051 U+0052 U+0053 U+0054 U+0055 U+0056 U+0057 U+0058 U+0059 U+005A U+005B U+005C U+005D U+005E U+005F SPACE EXCLAMATION MARK QUOTATION MARK NUMBER SIGN DOLLAR SIGN PERCENT SIGN AMPERSAND APOSTROPHE LEFT PARENTHESIS RIGHT PARENTHESIS ASTERISK PLUS SIGN COMMA HYPHEN-MINUS FULL STOP SOLIDUS DIGIT ZERO DIGIT ONE DIGIT TWO DIGIT THREE DIGIT FOUR DIGIT FIVE DIGIT SIX DIGIT SEVEN DIGIT EIGHT DIGIT NINE COLON SEMICOLON LESS-THAN SIGN EQUALS SIGN GREATER-THAN SIGN QUESTION MARK COMMERCIAL AT LATIN CAPITAL LETTER A LATIN CAPITAL LETTER B LATIN CAPITAL LETTER C LATIN CAPITAL LETTER D LATIN CAPITAL LETTER E LATIN CAPITAL LETTER F LATIN CAPITAL LETTER G LATIN CAPITAL LETTER H LATIN CAPITAL LETTER I LATIN CAPITAL LETTER J LATIN CAPITAL LETTER K LATIN CAPITAL LETTER L LATIN CAPITAL LETTER M LATIN CAPITAL LETTER N LATIN CAPITAL LETTER O LATIN CAPITAL LETTER P LATIN CAPITAL LETTER Q LATIN CAPITAL LETTER R LATIN CAPITAL LETTER S LATIN CAPITAL LETTER T LATIN CAPITAL LETTER U LATIN CAPITAL LETTER V LATIN CAPITAL LETTER W LATIN CAPITAL LETTER X LATIN CAPITAL LETTER Y LATIN CAPITAL LETTER Z LEFT SQUARE BRACKET REVERSE SOLIDUS RIGHT SQUARE BRACKET CIRCUMFLEX ACCENT LOW LINE

ISO/IEC 8859-4:1997 (E) © ISO/IEC Table 1 (continued) FINAL TEXT 1997-11-11 Table 1 (concluded) Bit combi- nation Hex IdentifierName Bit combi- nation Hex IdentifierName AA AB AC AD AE AF BA BB BC BD BE BF U+0060 U+0061 U+0062 U+0063 U+0064 U+0065 U+0066 U+0067 U+0068 U+0069 U+006A U+006B U+006C U+006D U+006E U+006F U+0070 U+0071 U+0072 U+0073 U+0074 U+0075 U+0076 U+0077 U+0078 U+0079 U+007A U+007B U+007C U+007D U+007E U+00A0 U+0104 U+0138 U+0156 U+00A4 U+0128 U+013B U+00A7 U+00A8 U+0160 U+0112 U+0122 U+0166 U+00AD U+017D U+00AF U+00B0 U+0105 U+02DB U+0157 U+00B4 U+0129 U+013C U+02C7 U+00B8 U+0161 U+0113 U+0123 U+0167 U+014A U+017E U+014B GRAVE ACCENT LATIN SMALL LETTER A LATIN SMALL LETTER B LATIN SMALL LETTER C LATIN SMALL LETTER D LATIN SMALL LETTER E LATIN SMALL LETTER F LATIN SMALL LETTER G LATIN SMALL LETTER H LATIN SMALL LETTER I LATIN SMALL LETTER J LATIN SMALL LETTER K LATIN SMALL LETTER L LATIN SMALL LETTER M LATIN SMALL LETTER N LATIN SMALL LETTER O LATIN SMALL LETTER P LATIN SMALL LETTER Q LATIN SMALL LETTER R LATIN SMALL LETTER S LATIN SMALL LETTER T LATIN SMALL LETTER U LATIN SMALL LETTER V LATIN SMALL LETTER W LATIN SMALL LETTER X LATIN SMALL LETTER Y LATIN SMALL LETTER Z LEFT CURLY BRACKET VERTICAL LINE RIGHT CURLY BRACKET TILDE NO-BREAK SPACE LATIN CAPITAL LETTER A WITH OGONEK LATIN SMALL LETTER KRA (Greenlandic) LATIN CAPITAL LETTER R WITH CEDILLA CURRENCY SIGN LATIN CAPITAL LETTER I WITH TILDE LATIN CAPITAL LETTER L WITH CEDILLA SECTION SIGN DIAERESIS LATIN CAPITAL LETTER S WITH CARON LATIN CAPITAL LETTER E WITH MACRON LATIN CAPITAL LETTER G WITH CEDILLA LATIN CAPITAL LETTER T WITH STROKE SOFT HYPHEN LATIN CAPITAL LETTER Z WITH CARON MACRON DEGREE SIGN LATIN SMALL LETTER A WITH OGONEK OGONEK LATIN SMALL LETTER R WITH CEDILLA ACUTE ACCENT LATIN SMALL LETTER I WITH TILDE LATIN SMALL LETTER L WITH CEDILLA CARON CEDILLA LATIN SMALL LETTER S WITH CARON LATIN SMALL LETTER E WITH MACRON LATIN SMALL LETTER G WITH CEDILLA LATIN SMALL LETTER T WITH STROKE LATIN CAPITAL LETTER ENG (Sámi) LATIN SMALL LETTER Z WITH CARON LATIN SMALL LETTER ENG (Sámi) CA CB CC CD CE CF DA DB DC DD DE DF EA EB EC ED EE EF FA FB FC FD FE FF U+0100 U+00C1 U+00C2 U+00C3 U+00C4 U+00C5 U+00C6 U+012E U+010C U+00C9 U+0118 U+00CB U+0116 U+00CD U+00CE U+012A U+0110 U+0145 U+014C U+0136 U+00D4 U+00D5 U+00D6 U+00D7 U+00D8 U+0172 U+00DA U+00DB U+00DC U+0168 U+016A U+00DF U+0101 U+00E1 U+00E2 U+00E3 U+00E4 U+00E5 U+00E6 U+012F U+010D U+00E9 U+0119 U+00EB U+0117 U+00ED U+00EE U+012B U+0111 U+0146 U+014D U+0137 U+00F4 U+00F5 U+00F6 U+00F7 U+00F8 U+0173 U+00FA U+00FB U+00FC U+0169 U+016B U+02D9 LATIN CAPITAL LETTER A WITH MACRON LATIN CAPITAL LETTER A WITH ACUTE LATIN CAPITAL LETTER A WITH CIRCUMFLEX LATIN CAPITAL LETTER A WITH TILDE LATIN CAPITAL LETTER A WITH DIAERESIS LATIN CAPITAL LETTER A WITH RING ABOVE LATIN CAPITAL LETTER AE LATIN CAPITAL LETTER I WITH OGONEK LATIN CAPITAL LETTER C WITH CARON LATIN CAPITAL LETTER E WITH ACUTE LATIN CAPITAL LETTER E WITH OGONEK LATIN CAPITAL LETTER E WITH DIAERESIS LATIN CAPITAL LETTER E WITH DOT ABOVE LATIN CAPITAL LETTER I WITH ACUTE LATIN CAPITAL LETTER I WITH CIRCUMFLEX LATIN CAPITAL LETTER I WITH MACRON LATIN CAPITAL LETTER D WITH STROKE LATIN CAPITAL LETTER N WITH CEDILLA LATIN CAPITAL LETTER O WITH MACRON LATIN CAPITAL LETTER K WITH CEDILLA LATIN CAPITAL LETTER O WITH CIRCUMFLEX LATIN CAPITAL LETTER O WITH TILDE LATIN CAPITAL LETTER O WITH DIAERESIS MULTIPLICATION SIGN LATIN CAPITAL LETTER O WITH STROKE LATIN CAPITAL LETTER U WITH OGONEK LATIN CAPITAL LETTER U WITH ACUTE LATIN CAPITAL LETTER U WITH CIRCUMFLEX LATIN CAPITAL LETTER U WITH DIAERESIS LATIN CAPITAL LETTER U WITH TILDE LATIN CAPITAL LETTER U WITH MACRON LATIN SMALL LETTER SHARP S (German) LATIN SMALL LETTER A WITH MACRON LATIN SMALL LETTER A WITH ACUTE LATIN SMALL LETTER A WITH CIRCUMFLEX LATIN SMALL LETTER A WITH TILDE LATIN SMALL LETTER A WITH DIAERESIS LATIN SMALL LETTER A WITH RING ABOVE LATIN SMALL LETTER AE LATIN SMALL LETTER I WITH OGONEK LATIN SMALL LETTER C WITH CARON LATIN SMALL LETTER E WITH ACUTE LATIN SMALL LETTER E WITH OGONEK LATIN SMALL LETTER E WITH DIAERESIS LATIN SMALL LETTER E WITH DOT ABOVE LATIN SMALL LETTER I WITH ACUTE LATIN SMALL LETTER I WITH CIRCUMFLEX LATIN SMALL LETTER I WITH MACRON LATIN SMALL LETTER D WITH STROKE LATIN SMALL LETTER N WITH CEDILLA LATIN SMALL LETTER O WITH MACRON LATIN SMALL LETTER K WITH CEDILLA LATIN SMALL LETTER O WITH CIRCUMFLEX LATIN SMALL LETTER O WITH TILDE LATIN SMALL LETTER O WITH DIAERESIS DIVISION SIGN LATIN SMALL LETTER O WITH STROKE LATIN SMALL LETTER U WITH OGONEK LATIN SMALL LETTER U WITH ACUTE LATIN SMALL LETTER U WITH CIRCUMFLEX LATIN SMALL LETTER U WITH DIAERESIS LATIN SMALL LETTER U WITH TILDE LATIN SMALL LETTER U WITH MACRON DOT ABOVE

© ISO/IEC ISO/IEC 8859-4:1997 (E)

6.2 Code table

For each character in the set the code table (table 2) shows a graphic symbol at the position in the code table corresponding to the bit combination specified in table 1. The shaded positions in the code table correspond to bit combinations that do not represent graphic characters. Their use is outside the scope of ISO/IEC 8859; it is specified in other International Standards, for example ISO/IEC 6429. Table 2 – Code table of Latin alphabet No. 4 SP NBSP SHY hex FINAL TEXT 1997-11-11

ISO/IEC 8859-4:1997 (E) © ISO/IEC

7 Identification of the character set

7.1 Identification according to ISO/IEC 2022

The graphic characters of this part of ISO/IEC 8859 constitute a single coded character set. However in accordance with ISO/IEC 2022 and ISO/IEC 4873 the code table of this part of ISO/IEC 8859 may be considered to consist of the following components: – The character SPACE represented by bit combination 02/00; – a 94-character G0 graphic character set represented by bit combinations 02/01 to 07/14; – a 96-character G1 graphic character set represented by bit combinations 10/00 to 15/15. When the identification methods of ISO/IEC 2022 or ISO/IEC 4873 are used this part of ISO/IEC 8859 shall be identified by the following pair of designation functions: GZD4 04/02 (ESC 02/08 04/02) G1D6 04/04 (ESC 02/13 04/04) NOTE – The corresponding escape sequences are shown in parentheses.

7.2 Identification according to ISO/IEC 8824-1

(ASN.1) In the terminology of ISO/IEC 8824-1 the character set of this part of ISO/IEC 8859 and the corresponding coded representations are distinct, and are known as the "character abstract syntax" and the "character transfer syntax" respectively. When the identification methods of ISO/IEC 8824-1 are used this part of ISO/IEC 8859 shall be identified by the following object identifiers: – character set { iso standard 8859 4 abstract-syntax (1) } – coded representations { iso standard 8859 4 transfer-syntax (0) } The corresponding object descriptors shall be: – character set "ISO 8859 part 4 repertoire" – coded representations "ISO 8859 part 4 code"

7.3 Identification using the ISO International

register of coded character sets to be used with escape sequences According to 7.1 above the character set of this part of ISO/IEC 8859 may be considered to consist of the character SPACE, a 94-character G0 graphic character set, and a 96-character G1 graphic character set. The G0 and G1 graphic character sets may be identified by the use of the Registration Numbers from the ISO International register of coded character sets to be used with escape sequences. When these registration numbers are used this part of ISO/IEC 8859 shall be identified by the following pair of registration numbers: – G0 graphic character set ISO-IR 6 – G1 graphic character set ISO-IR 110

© ISO/IEC ISO/IEC 8859-4:1997 (E) Annex A FINAL TEXT 1997-11-11 (informative) Coverage of languages by parts 1 to 10 of ISO/IEC 8859 A.1 Languages of European origin written in Latin script The following parts of ISO/IEC 8859 specify coded character sets which comprise various different selections of characters based on the Latin alphabet. These sets are identified by the numbers 1 to 6 as shown: ISO/IEC 8859-1 Latin alphabet No. 1 ISO/IEC 8859-2 Latin alphabet No. 2 ISO/IEC 8859-3 Latin alphabet No. 3 ISO/IEC 8859-4 Latin alphabet No. 4 ISO/IEC 8859-9 Latin alphabet No. 5 ISO/IEC 8859-10 Latin alphabet No. 6 The following official and regional languages written in Europe are covered by the Latin alphabets 1–6 as indicated by number in table A.1: Table A.1 – Language coverage Language Covered by alphabet(s)Language Covered by alphabet(s)Language Covered by alphabet(s) Albanian Basque Breton Catalan Croat Czech Danish Dutch English Esperanto Estonian Faroese Finnish French (1) 2 3 (3) (5) Frisian Galician German Greenlandic Hungarian Icelandic Irish Gaelic (new orthography) Italian Latin Latvian Lithuanian Luxemburgish Maltese Norwegian Polish Portuguese Rhaeto-Romanic Romanian Sámi Scottish Gaelic Slovak Slovene Sorbian Spanish Swedish Turkish (3) NOTES 1 The list of languages in table A.1 is not exhaustive. It shows the languages that are included in the Scope clause of each part of ISO/IEC 8859.

2 For writing French three characters (Œ, œ, Ÿ) not

specified in parts 1, 3 and 9, are also needed.

3 The various Sámi languages use partly differing

orthographies. The character sets in parts 4 and 10 cover the requirements of the Sámi languages most commonly used in Finland, Norway and Sweden. For the Skolt Sámi language used in Finland and Norway additional characters are needed. These are included in ISO-IR 158 and 197.

4 There are several official written languages outside

Europe that are covered by Latin alphabet No. 1. Examples are Indonesian/Malay, Tagalog (Philippines), Swahili, Afrikaans. 5 Use of Latin alphabet No. 3 for Turkish is deprecated.

ISO/IEC 8859-4:1997 (E) © ISO/IEC A.2 Languages written in non-Latin scripts The following parts of ISO/IEC 8859 specify coded character sets which include graphic characters from alphabets other than the Latin alphabet: ISO/IEC 8859-5 Latin/Cyrillic alphabet ISO/IEC 8859-6 Latin/Arabic alphabet ISO/IEC 8859-7 Latin/Greek alphabet ISO/IEC 8859-8 Latin/Hebrew alphabet The following official and regional languages are covered by these alphabets: The Cyrillic characters included in part 5 cover Bulgarian, Byelorussian, (Slavic) Macedonian, Russian, Serbian and Ukrainian (as written up to 1990, see also Scope of part 5). The Arabic characters included in part 6 cover Arabic. The Greek characters included in part 7 cover Greek ( monotonikóorthography). The Hebrew characters included in part 8 cover Hebrew. FINAL TEXT 1997-11-11

© ISO/IEC ISO/IEC 8859-4:1997 (E) Annex B FINAL TEXT 1997-11-11 (informative) Main differences between the First edition and this Second edition of this part of ISO/IEC 8859 B.1 The names of the graphic characters have been amended where necessary to align them with the names of characters adopted for all standards on coded character sets developed under the responsibility of ISO/IEC JTC 1. For each character the short identifiers specified in ISO/IEC 10646-1 Amendment 9 have been added to table 1. B.2 The new style of conformance clause, adopted for all standards on coded character sets, has been introduced. B.3 Object identifiers conforming to Abstract Syntax Notation One (ASN.1, see ISO/IEC 8824-1) are specified in 7.2 for the character set, and the corresponding coded representations, of this part of ISO/IEC 8859. Registration numbers from the International register of coded character sets to be used with escape sequences, have been included as an additional method of identifying the coded character set of this part of ISO/IEC 8859. B.4 A new Annex A has been added that identifies the coverage of languages by parts 1–10 of ISO/IEC 8859. B.5 Various editorial adjustments and clarifications have been made to the text of the standard. The hexadecimal equivalents of the bit combinations have been added to tables 1 and 2, and a revised font has been used for the graphic symbols in table 2. B.6 Annex C, Bibliography, has been added.

ISO/IEC 8859-4:1997 (E) © ISO/IEC Annex C FINAL TEXT 1997-11-11 (informative) Bibliography ISO/IEC 6429:1992, Information technology – Control functions for coded character sets. ISO/IEC 10367:1991, Information technology – Standardized coded graphic character sets for use in 8-bit codes. ISO/IEC 10646-1:1993, Information technology – Universal Multiple-Octet Coded Character Set (UCS) – Part 1: Architecture and Basic Multilingual Plane. ISO International register of coded character sets to be used with escape sequences.