MTP35W NELLSEMI
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
FEATURES
UL recognition file number E320098 Universal 3-way terminals: snap-on, wire Typical IR less than 1.0 µA TYPICAL APPLICATIONS General purpose use in AC/DC bridge full wave Case: GBPC Epoxy meets UL 94 V-O flammability rating PRIMARY CHARACTERRISTICS IF(AV) Terminals: Gold plated on wire leads,solderable Polarity: As marked Weight: 21g (0.74 ozs) 35A VRRM 600V to 1600V 1.2V 5 µA 150ºC IFSM IR VF SEMICONDUCTOR RoHS RoHS Page 1 of 3 Glass Passivated Triple-Phase Bridge Rectifier, 35A Nell High Power Products Compliant to RoHS wrap-around, or PCB mounting High surge current capability Low thermal resistance Solder dip 260°C, 40s rectification for big power supply, field supply for DC motor, industrial automation applications. MECHANICAL DATA Mounting Torque: 20 inches-lbs.max. TJ max. 450A MTP35W MTP3506W Thru MTP3516W Glass passivated chips per J-STD-002 and JESD22-B102. º º 11.7 9.35 7 28.5 28.5 Ø8.5 Ø10.2 Ø4.5 Ø2 Ø8.5 13.4 9.6 12.4 All dimensions in millimeters º ºº
MAJOR RATINGS AND CHARACTERISTICS (T = 25°C unless otherwise noted)A PARAMETER V V SYMBOL MTP35..W UNIT 420 560 700 840 600 800 1000 1200 1600 06 1210 16 1120 600 800 1000 1200 1600 V Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified output current (Fig.1) Peak forward surge current single sine-wave superimposed on rated load Rating (non-repetitive, for t greater than 1 ms and less than 8.3 ms) for fusing RMS isolation voltage from case to leads Operating junction storage temperature range VRRM VRMS IFSM VDC IF(AV) VISO 2I t T ,TJ STG 2500 840 -55 to 150 450 2A s A A V ºC ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted)A PARAMETER V µA SYMBOL MTP35..W UNIT 0806 1210 16 Maximum instantaneous forward drop per diode Maximum reverse DC current at rated DC blocking Typical junction capacitance per diode VF IR CJ 300 1000 1.2 pF voltage per diod TEST CONDITIONS I = 17.5AF T = 25°CA 4V, 1MHz T = 150°CA THERMAL CHARACTERISTICS (T = 25°C unless otherwise noted)A PARAMETER °C/W SYMBOL MTP35..W UNIT 0806 1210 16 Typical thermal resistance (1) With heatsink (1)RθJC 0.9 (2) Bolt down on heatsink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with Notes #10 screw - Module type: 3 phase Bridge - Current rating: I - : VVoltage code x 10 F (AV) RRM Device code ORDERING INFORMATION TABLE 35 10 WMTP MTP35W - Package outline: W for “GBPC” package
INSTANTANEOUS FORWARD CURRENT - (A) IF AVERAGE FORWARD CURRENT - (A) 0 50 100 150 TCCASE TEMPERATURE - ( ℃) IF INSTANTANEOUS FORWARD VOLTAGE - (V) Fig.1 Forward Current Derating Curve Fig.2 Typical Forward Characteristics Zth(j-C) 1.0 0.5 Rthjc TRANSIENT THERMAL IMPEDANCE - (℃/ W) 0.001 0.01 0.1 1.0 10 100 SQUARE WAVE PULSE DURATION (S) 500 400 300 200 100 IFSM PDAK FWD SURGE CURRENT - (A) NUMBER OF CYCLES AT 60 HZ Fig.3 Max Non-Repetitive Peak Surge Current Fig.4 Transient thermal impedance Page 3 of 3 Mounted on a 220x220x50mm Al plate heatsink Resistive or Inductive load max. typ. 10010 MTP35W