MTP150I NELLSEMI

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

FEATURES

UL recognition file number E320098 Small volume, light weight Typical IR less than 2.0 µA TYPICAL APPLICATIONS General purpose use in AC/DC bridge full wave Epoxy meets UL 94 V-O flammability rating PRIMARY CHARACTERRISTICS IF(AV) 150A VRRM 800V to 1800V 1.40V 20 µA 150ºC IFSM IR VF RoHS RoHS Glass Passivated Three-Phase Bridge Rectifier, 150A Nell High Power Products Compliant to RoHS High surge current capability Low thermal resistance Weight: 220g (7.8 ozs) rectification for big power supply, field supply for DC motor, industrial automation applications. ADVANTAGE TJ max. 1800A MTP15008I Thru MTP15018I Isolation voltage up to 2500V International standard package All dimensions in millimeters MTP150I Glass passivated junctions 26.0 26.0 2-ø6.515.0 27.0 54.0 25.0 72.0 80.0 96.0 ~ ~~ 5-M6 5.8 17.0 Page 1 of 3www.nellsemi.com

MAJOR RATINGS AND CHARACTERISTICS (T = 25°C unless otherwise noted)A PARAMETER V V SYMBOL MTP150..I UNIT 1900 900 1100 1300 1800800 1000 1200 1600 181210 16 1700 1800800 1000 1200 1600 V Maximum repetitive peak reverse voltage Peak reverse non-repetitive voltage Maximum DC blocking voltage Maximum average forward rectified output current Peak forward surge current single sine-wave superimposed on rated load Rating (non-repetitive, for t greater than 1 ms and less than 10 ms) for fusing RMS isolation voltage from case to leads Operating junction storage temperature range VRRM VRSM IFSM VDC IF(AV) VISO 2I t 2500 16.2 150 -40 to 150 1800 2KA s A A V ºC ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted)A PARAMETER V µA SYMBOL MTP150..I UNIT 08 181210 16 Maximum instantaneous forward drop per diode Maximum reverse DC current at rated DC blocking VF IR 1.40 voltage per diod TEST CONDITIONS I = 150AF T = 25°CA T = 150°CA THERMAL AND MECHANICAC (T = 25°C unless otherwise noted)A PARAMETER °C/W SYMBOL MTP150..I UNIT 08 181210 16 Typical thermal resistance (1) With heatsink, single side heat dissipation, half sine wave. (1)RθJC 0.14 Notes Storage temperature range TSTG -40 to 125 ºC TJ TEST CONDITIONS junction to case Single-side heat dissipation, sine half wave Mounting ± 10 % to heatsink M6 A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. Nmto terminal M6 5 Approximate weight 220 torque g mA Ordering Information Tabel MTP 150 16 1 2 I

1 Module type: "MTP" for 3Φ Bridge

  • l rating : F(AV) "150" for 150A Voltage code : code x 100 = VRRM Device code RoHS RoHS Nell High Power Products MTP150I Page 2 of 3www.nellsemi.com

Fig.4 Case temperature vs. on-state average current 2Fig.6 I t characteristic Case temperature (°C) 180 150 Time(ms) Time (s) 0.1 12090 0.01 6030 0.001 0.03 0.09 120 150 180 210 0.12 0.06 2 2 I t ( KA S) Transient thermal impedance (°C/W)On-state average current (A) 1000 100 Fig.1 Forward current vs. Forward voltage Fig.3 Power consumption vs. Avergage current Fig.5 Forward surge current vs Cycle 250 On-state average current (A) Peak on-state current (A) 200 Cycles @50Hz 100 15010050 100 200 300 400 500 600 700 3.5 3.0 2.5 2.0 1.5 1.0 0.5 1.0 0.5 1.5 2.0 2.5 Peak on-state voltage (V) On-state power consumption (W)Forward surge current (KA) T = 150°CJ 0.15 Fig.2 Thermal lmpedance (junction to case) RoHS RoHS Nell High Power Products MTP150I Page 3 of 3www.nellsemi.com