SQM RFE
Document overview
- PDF pages: 2
Technical content
Page 1
CEMENT BOX POWER RESISTORS
RoHS
(M)SQM Series: Radial Leaded
INTRODUCTION
Cement-Box type resistors offer a choice of resistive elements inside a white flameproof cement box. In addition to being flameproof, these resistors are also non-corrosive and humidity proof. The available resistive elements are:
SQ - Standard wire wound (all welded construction) MSQ - Metal oxide core (low inductance, high resistance) NSQ - Non-Inductively wound (Ayrton-Perry Method, all welded construction)
DIMENSION(mm)& RESISTANCE RANGE
Operating temperature range
- Wire wound : -55°C ~ + 155°C
- Metal oxide : -30°C ~ + 155°C
SQM T
W
H
4.0 min
P ± 1
2W : 0.65 ± 0.03 3W~10W : 0.8 ± 0.03
| Series | Dimension (mm) | Resistance Range | Max. Working Voltage (V) | ||||
|---|---|---|---|---|---|---|---|
| Wire Wound | Metal Oxide | ||||||
| W ± 1 | T ± 1 | H ± 0.5 | P | SQ_ | MSQ_ | ||
| SQM2W | 11.5 | 7.5 | 20 | 5 | 0.01Ω ~ 50Ω | 48Ω ~ 100KΩ | 350V |
| SQM3W | 12 | 8.5 | 25 | 5 | 0.01Ω ~ 100Ω | 50Ω ~ 100KΩ | 500V |
| SQM5W | 13 | 9 | 25 | 5 | 0.01Ω ~ 180Ω | 50Ω ~ 100KΩ | 750V |
| SQM7W | 13 | 9 | 39 | 5 | 0.01Ω ~ 470Ω | 100Ω ~ 47KΩ | 750V |
| SQM10W | 13 | 9 | 51 | 5 | 0.01Ω ~ 680Ω | 100Ω ~ 47KΩ | 750V |
| SQM10WS | 16 | 12 | 35 | 7.5 | 0.01Ω ~ 470Ω | 100Ω ~ 47KΩ | 750V |
- Resistance Range for standard resistance, below or over this resistance range on request. 2. Non-inductive type up 50Ω only
PART NUMBER EXAMPLE
MSQM 5W - 47K - J


NOTE: All Specifications subject to change without notice.
Page 1 of 2
RESISTANCE RANGE
| Ohms | 0.22 | 2.0 | 22 | 220 | 2.2K | 22K |
| Code | 0R22 | 2R0 | 22R | 220R | 2K2 | 22K |
TOLERANCE other tolerance on request
| Tolerance | ± 1% | ± 2% | ± 5% | ± 10% |
| Code | F | G | J | K |
C2CB03
RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com
2019.12.30
Page 2
CEMENT BOX POWER RESISTORS
RoHS
(M)SQM Series: Radial Leaded
POWER DERATING CURVE
Cement Wire Wound Resistor

Ambient Temperature (°C)
ELECTRICAL CHARACTERISTICS
Cement Metal Oxide Resistor

Ambient Temperature (°C)
| Test Items | Method | Wire Wound | Metal Oxide |
| Short Time Overload | JIS-C-5202 5.5 10 times RCWV for 5 seconds | ±(2%+0.05Ω) | ±(0.25%+0.05Ω) |
| Temperature Coefficient | Resistance value at room termperature and room termperature +100°C | ±400ppm | ±200ppm |
| Load Life | JIS-C-5202 7.10 70°C at RCWV for 1000hrs (1.5hrs on; 0.5hrs off) | ±(5%+0.05Ω) | ±(1.5%+0.05Ω) |
| Load Life in Humidity | JIS-C-5202 7.9 40 ± 2°C, 90~95% RH at RCWV for 1000 hrs (1.5hrs on ; 0.5hr off) | ±(5%+0.05Ω) | ±(1.5%+0.05Ω) |
| Solder Ability | JIS-C-5202 6.5 235 ± 5°C for 2 ± 0.5 seconds | 95% min. Coverage | 95% min. Coverage |
| Pulse Overload | JIS-C-5202 5.8 | Max. 1500V | Max. 1500V |
| 4 times RCWV for 10,000 cycles (1 sec. on; 25 secs. Off) | ±(1%+0.05Ω) | ±(1%+0.05Ω) | |
| Dielectric Withstanding Voltage | Max. 1000V | Max. 1000V |
Rated continuous Working Voltage (RCWV) = POWER
RATING\*. RESISTANCE.
VALUE
.
NOTE: All Specifications subject to change without notice.
Page 2 of 2
C2CB03
RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com
2019.12.30