MSP-600 ETC1
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
New High Accuracy, Digitally Compensated Iso EMI/RFI Protected Stainless Steel 9001 Isolated Pressure Transducer _ = High Accuracy = Low Cost OEM ‘e = 100% Leak Proof 4 Features eP> High Accuracy SON A> Digitally Compensated eS 2 iS One-piece Stainless Steel Construction ~. a Ranges up to 10,000 PSI or 700 BAR } Q N Amplified Outputs 4 , i P| i a} Wide Operating Temperature Range Ss Low Pi Configurati a il i ow ve onfiguration BS ’ s ‘ , Pumps and Compressors Bit | ee | Hydraulic/ Pneumatic Systems vit Off Road Po B | | | PSY | Energy and Water Management _A| | | es —— Pressure Instrumentation oe ||| Refrigeration Equipment TW) Ot‘C;zCS i i Bay T | Sa Agriculture Equipment Trin raking ystems ee | 0 ee
Description
The MSP series pressure transducers set a new price-performance standard for low cost, high volume, commercial and industrial applications This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids or gases. The transducer pressure cavity is machined from a solid piece of 17-4 PH stainless steel. The standard version includes a 1/, NPT ine thread allowing a leak-proof, all metal Ra \\\\ sealed system. There are no o-rings, welds or organics exposed to the pressure media. « a The durability is excellent. A) Measurement Specialties proprietary Microfused technology, derived from demanding axon” aerospace applications, cp micromachined silicon \\\\\\\\ Hlezressig strain gages, lused with high temperature glass to a stainless steel ¢0' jos iaphragm. This approach achieves media compatibility simply and elegantly N\\2 providing an exceptionally stable sensor without the p-n junctions of conventional micromachined sensors. ‘This product is geared to the OEM customer using medium to high volumes. The standard version is suitable for many applications, but the dedicated design team at our Transducer Engineering Center stands ready to provide a semi-custom design where the volume and application warrants.
Performance at 25°C (77°F): Pressure range 0-25, 50, 75, 100, 250, 500, 1000, 2500, 5000, 7500, 10000 PSI Accuracy, % of FS Span 0.25% BSL, max (per ISA $37.2) (combined linearity, hysterisis and repeatability) Media compatibility 17-4 PH stainless steel (optional 3161 stainless) Pressure cycles 10 milion, minimum Pressure overload 2 times rated pressure Burst pressure 10 times up to 7,000 PSI, 5 times above 1,000 PSI Long term stability (1 year) £0.25% FS Span (Typical) Electrical: Ratiometric Non-Ratiometric Supply voltage 4.75 10 5.25VDC 10-32000 Supply current <10mA <25mA Output 0.5 to 4.5V, at SV 1-5V, three wires 4-20mA, two wires Output impedance 100 Ohms max for voltage output, 0-1100 Ohm for 4-20mA Bandwidth DE to 1KHz (Typical) Standard connector options Packard connector - Metri-pack 150, 3 pins Cable - 24" length (Additional connectors available upon request) ENVIRONMENTAL ORDERING Operating temperature range 40" to 100°C MsP600 — as LC J-LJ-| Compensated temperature range -20 0 85°C Pressure Range Total error band << 1% of FS (75-10,000 PSI) P=PSl 12 ft (over compensated temperature range) <-+1.5% of FS (25-50 PSI) B=BAR - cable Storage temperature range -45° to 100°C Ke Kg/at b ve ‘| Shock 1006, 1/2" sine, 11msee (per MIL-STD-202) outs some Newvanet connector. Immunity , Part 5 =4-20mA two wire . i FN 50082, Part 2 for other options consult factory Humidity 95% RH, condensing 0.875 * NPT Stendord MSP-600 Electrical Connections: "| pressure pert beeel cud Tint Cable Glond Outputs: 3/4 5 | Creeks Coble Red +Supply Red —_+Supply (™ ont] ESB Black Ground ‘Black Output ©) -» pee i White Output SJ cen (Lees) oven 2.329 24.0 DIMENSIONS IN INCHES AND ARE REFERENCE ONLY, UNITED STATES iM Measurement Specialties, Inc PO Box 799 Valley Forge, PA 19482 MEASUREMENT Tel: (610) 650-1500 Fax: (610) 650-1509 SPECIALTIES Email: sensors @msiusa.com Web site: www.msiusa.com