MSP VISHAY

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 5

Technical content

Thick Film Resistor Networks Single-In-Line, Molded SIP; 01, 03, 05 Schematics 6, 8, 9 or 10 Pin “A” Profile and 6, 8 or 10 Pin “C” Profile www.vishay.com For technical questions , contact: ff2aresistors@vishay.com Document Number: 31510

1 Revision: 28-Jul-06

FEATURES

  • Thick film resisitive elements
  • Low temperature coeffici ent (- 55 °C to + 125 °C) ± 100 ppm/°C
  • Rugged, molded case construction
  • Reduces total assembly costs
  • Compatible with automatic insertion equipment and reduces PC board space
  • Wide resistance range (10 Ω to 2.2 MΩ)
  • Available in tube pack or side-by-side pack
  • Lead (Pb)-free version is RoHS compliant Available RoHS* COMPLIANT * Tighter tracking available ** Tolerances in brackets available on request * Pb containing terminations are not RoHS compliant, exemptions may apply STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL/ SCHEMATIC PROFILE RESISTOR POWER RATING Max. AT 70 °C W RESISTANCE RANGE Ω STANDARD TOLERANCE TEMPERATURE COEFFICIENT ppm/°C TCR TRACKING* ppm/°C OPERATING VOLTAGE Max. VDC MSPxxx01 A C 0.20 0.25 10 - 2.2M ± 2 Standard MSPxxx03 A C 0.30 0.40 10 - 2.2M ± 2 Standard MSPxxx05 A C 0.20 0.25 10 - 2.2M ± 2 Standard GLOBAL PI N COUNT PACKAGE HEIGHT SCHEMATIC RESISTA NCE TOLERA NCE SPECIAL MODEL VALUE CODE MSP 06 = 6 Pin A = “A” Profile 01 = Bussed R = Decimal F = ± 1 % Blank = Standard 08 = 8 Pin C = “C” Profile 03 =Isolated K = Thousand G = ± 2 % (Dash Number) 09 = 9 Pin 00 = Special M = Million J = ± 5 % (up to 3 digits) 10 = 10 Pin 10R0 = 10 Ω S = Special From 1-999 680K = 680 k Ω as applicable 1M00 = 1.0 M Ω GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MSP06A031K00GDA (preferred part numbering format) Historical Part Number example: MSP06A03102G (will continue to be accepted) HISTORICAL PIN COUNT PACKAGE SCHEMATIC RESISTANCE TOLERA NCE PACKAGING MODEL HEIGHT VALUE CODE MSP0 6A031K00G D A PACKAGING EJ = Lead (Pb)-free, Tube DA = Tin/Lead, Tube GLOBAL PI N COUNT PACKAGE HEIGHT SCHEMATIC RESISTA NCE TOLERA NCE SPECIAL MODEL VALUE CODE MSP 06 = 6 Pin A = “A” Profile 05 = Dual 3 digit F = ± 1 % Blank = Standard 08 = 8 Pin C = “C” Profile Terminator Impedence code, G = ± 2 % (Dash Number) 09 = 9 Pin follo wed by J = ± 5 % (up to 3 digits) 10 = 10 Pin Alpha modifier From 1-999 (see Impedence as applica ble codes table) New Global Part Numbering: MSP08C05131AGDA (preferred part numbering format) Historical Part Number example: MSP08C05221331G (will continue to be accepted) HISTORICAL PIN COUNT PACKAGE SCHEMATIC RESISTANCE RESISTA NCE TOLERANCE PACKAGI NGMODEL HEIGHT VALUE 1 VALUE 2 MS P 0 8 C05131AG DA MSP 0 8 C 05 221 331 G DO3 MSP 06 A 03 102 G DO3 PACKAGING EJ = Lead (Pb)-free, Tube DA = Tin/Lead, Tube

Document Number: 31510 For technical questi ons, contact: ff2aresistors@vishay.com www.vishay.com Revision: 28-Jul-06 2 MSP Thick Film Resistor Networks Single-In-Line, Molded SIP; 01, 03, 05 Schematics 6, 8, 9 or 10 Pin "A" Profile and 6, 8 or 10 Pin "C" Profile Vishay Dale DIMENSIONS in inches [millimeters] A Max. D Max. 0.135 + 0.015 - 0.010 [3.43 + 0.381 - 0.254]B C Equal Space 0.016 ± 0.003 [2.54 ± 0.254] Non-Accumulative 0.040 ± 0.010 [1.02 ± 0.254] 0.015 [0.381] Min. PIN #1 0.012 ± 0.003 [0.305 ± 0.076] 0.090 [2.29] Max. GLOBAL MODEL A (Max.) B C D (Max.) MSP06 0.590 [14.99] 0.500 [12.70] 5 MSPxxA = 0.195 [4.95] MSP10 0.990 [25.15] 0.900 [22.86] 9 TECCHNICAL SPECIFICATIONS PARAMETER UNIT MSP SERIES Package Power Rating Maximum at + 25 °C and + 70 °C See Derating Curves Voltage Coefficient of Resistance V eff < 50 ppm typical Dielectric Strength VAC 200 Isolation Resistance (03 Schematic) Ω > 100M Operating Temperature Range °C - 55 to + 125 Storage Temperature Range °C - 55 to + 150 MECHANICAL SPECIFICATIONS Marking Resistance to Solvents: Permanency testing per MIL-STD-202, Method 215 Solderability: Per MIL-STD-202, Method 208E, RMA flux Body: Molded epoxy Terminals: Copper alloy, solder plated Weight: MSP06A = 0.4 gram MSP06C = 0.7 gram MSP08A = 0.5 gram MSP08C = 0.9 gram MSP09A = 0.55 gram MSP10C = 1.1 gram MSP10A = 0.6 gram

www.vishay.com For technical questions , contact: ff2aresistors@vishay.com Document Number: 31510

3 Revision: 28-Jul-06

Vishay Dale Thick Film Resistor Networks Single-In-Line, Molded SIP; 01, 03, 05 Schematics 6, 8, 9 or 10 Pin "A" Profile and 6, 8 or 10 Pin "C" Profile IMPEDANCE CODES CODE R1(Ω) R 2(Ω) CODE R1(Ω) R 2(Ω) 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K CIRCUIT APPLICATIONS

01 Schematic 5, 7, 8* or 9 resistors with one pin common

The MSPxxx01 circuit contains 5, 7, 8* or 9 nominally equal resistors, each connected between a common pin (Pin No. 1) and a discrete PC board pin. Commonly used in the following applications:  "Wired OR" Pull-up  MOS/ ROM Pull-up/Pull-down  Power Gate Pull-up  Open Collector Pull-up  TTL Input Pull-down  TTL Unused Gate Pull-up * Available in "A" Profile only Standard E-24 resistance values stocked. Consult factory.

03 Schematic

3, 4 or 5 isolated resistors The MSPxxx03 circuit contains 3, 4 or 5 resistors of nominally equal value in a compact package. Each resistor is connected to two discrete PC pins. Standard E-24 resistance values stocked. Consult factory.

05 Schematic

Pulse squaring and TTL dual-line terminators The MSPxxx05 circuits contain 4, 6, 7* or 8 series pair of resistors. Each series pair is connected between two common lines. The junction of these resistor pairs is connected to the input terminals. The 05 circuits are designed for TTL dual-line termination and pulse squaring. * Available in "A" Profile only Many dual terminator resistance values stocked. Consult factory. 1 2 3 n-1 n 1 2 3 4 n-1 n 1 2 3 n-1 n

Thick Film Resistor Networks Single-In-Line, Molded SIP; 01, 03, 05 Schematics 6, 8, 9 or 10 Pin "A" Profile and 6, 8 or 10 Pin "C" Profile Vishay Dale Document Number: 31510 For technical questi ons, contact: ff2aresistors@vishay.com www.vishay.com Revision: 28-Jul-06 4 Higher power ratings available. Contact factory. Single Resistor 01 and 050.30 - 50 + 25 + 70 + 125 + 150 Derating Ambient Temperature °C Power Rating (Watts) 0.45 1.15 1.50 1.90 “A” Profile Single Resistor 01 and 050.38 - 50 + 25 + 70 + 125 + 150 Derating Ambient Temperature °C Power Rating (Watts) 0.60 1.50 2.00 2.50 “C” Profile 3.00 "A" PROFILE + 70 °C PACKAGE RATINGS MSP10A 1.25 watts MSP09A 1.12 watts MSP08A 1.00 watts MSP06A 0.75 watts "C" PROFILE + 70 °C PACKAGE RATINGS MSP10C 1.60 watts MSP08C 1.30 watts MSP06C 1.00 watts PERFORMANCE TEST CONDITIONS MAX. ΔR (Typical Test Lots) Power Conditioning 1.5 x rated power, applied 1.5 hours “ON” and 0.5 hour “OFF” for 100 hrs. ± 4 hrs. at + 25 °C ambient temperature ± 0.50 % ΔR Thermal Shock 5 cycles between - 65 °C and + 125 °C ± 0.50 % ΔR Short Time Overload 2.5 x rated working voltage 5 seconds ± 0.25 % ΔR Low Temperature Operation 45 minutes at full rated working voltage at - 65 °C ± 0.25 % ΔR Moisture Resistance 240 hrs. with humidity ranging from 80 % RH to 98 % RH ± 0.50 % ΔR Resistance to Soldering Heat Leads immersed in + 260 °C solder to within 1/16" of device body for 10 seconds ± 0.25 % ΔR Shock Total of 18 shocks at 100 G's ± 0.25 % ΔR Vibration 12 hours at maximum of 20 G's between 10 and 2000 Hz ± 0.25 % ΔR Load Life 1000 hrs. at + 70 °C, rated power applied 1.5 hours “ON”, 0.5 hour “OFF” for full 1000 hour period. Derated according to the curve. ± 1.00 % ΔR Terminal Strength 4.5 pound pull for 30 seconds ± 0.25 % ΔR Insulation Resistance 10 000 Megohm (minimum) - Dielectric Withstanding Voltage -

Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1 Disclaimer Legal Disclaimer Notice Vishay All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all li ability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permit ted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.