MSM19DPST SCHURTER
Document overview
- PDF pages: 17
Technical content
Page 1
Product manual
Vandal-proof MSM DP switch
Contents
CONTENTS .......................................................................................................................................................... 1
1 PRODUCT DESCRIPTION ........................................................................................................................ 3
2 TECHNICAL DATA AND DIMENSIONAL DRAWINGS ...................................................................... 3
2.1 Technical Data .................................................................................................................................................. 3
2.2 Component dimensions .................................................................................................................................... 6 2.2.1 Component dimensions MSM 19 DP ...................................................................................................................... 6 2.2.2 Component dimensions MSM 22 DP ...................................................................................................................... 7 2.2.3 Component dimensions MSM 30 DP ...................................................................................................................... 8
2.3 Actuator Tolerance Range ................................................................................................................................ 9
2.4 Hole dimensions ............................................................................................................................................. 10
2.5 Starting Torque .............................................................................................................................................. 11
2.6 Switching Symbols .......................................................................................................................................... 11
2.7 Accessories ..................................................................................................................................................... 11
3 ORDER NUMBERS .................................................................................................................................. 12
3.1 Order numbers MSM with micro switches of protection class IP40 (double‐pole) ............................................ 12
3.2 Lettering ........................................................................................................................................................ 13
4 PACKAGING ............................................................................................................................................. 15
5 QUALIFICATION TEST.......................................................................................................................... 16
5.1 IP Protection Class .......................................................................................................................................... 16
5.2 IK Protection Class .......................................................................................................................................... 16
5.3 ESD Protection ............................................................................................................................................... 16
5.4 Salt Spray Test ................................................................................................................................................ 16
| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite | Erstelldatum: | Ersteller: | Änderungsdatum: | Geändert von: | Änderungs-Nr. | Datenblatt Nr. | Index |
| 1 of 17 | 07.03.2008 | Schillak | Schöchlin | 9701 | 105.9534 | a | |
Page 2
6 APPROVALS ............................................................................................................................................. 17
7 ROHS COMPLIANT ................................................................................................................................ 17
| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite | Erstelldatum: | Ersteller: | Änderungsdatum: | Geändert von: | Änderungs-Nr. | Datenblatt Nr. | Index |
| 2 of 17 | 07.03.2008 | Schillak | Schöchlin | 9701 | 105.9534 | a | |
Page 3
1
PRODUCT DESCRIPTION
Both, the housing and the actuator of the vandal-proof MSM DP switch are made of high-quality stainless steel. By applying this robust and weather-resistant material, the switch is particularly suitable for the use in harsh environments. Furthermore, the switch can be used in applications where an additional second contact is required for a safety circuit. The MSM DP is available with mounting diameters of 19, 22 and 30 mm. The switch is equipped with two separated switching contacts which are available as normally open, normally closed or as change-over. Different types of contact cover a range of permissible switching voltages from 30 VDC to 250 VAC, switching currents are permissible from 0.1 to 10 Ampere. The MSM DP is
equipped with flat-pin plugs to permit fast connection. The cables are plugged onto the micro switch which is subsequently plugged onto the previously screwed-in switch. Point and ringilluminated versions are available for applications at night or as an optical status display.
TECHNICAL DATA AND DIMENSIONAL DRAWINGS
2
2.1 Technical Data
| Micro Switch for Electrical Rating (Protection Class IP 40) | 0.1 A 30 VDC | 5 A 125 VAC | 3 A 250 VAC | 10 A 250 VAC |
| Electrical Data | ||||
| Contact Material | gold | silver | silver | |
| (VAC) Switching Voltage max. (VDC) | 30 | 125 / 250 | 250 | |
| Switching Current max. (A) | 0.1 | 5 / 3 | 10 | |
| Rated Braking Capacity (W) | 3 | 1250 | 2500 | |
| Lifetime 1) (at Rated Braking Capacity) | 200,000 | 200,000 | 50,000 | |
| Lifetime (160mA at 48VDC) | 1,500,000 | |||
| Initial Contact Resistance, new (mΩ) | < 50 | < 30 | < 30 | |
| Insulation Resistance (IEC 512-2) (MΩ) | > 100 | > 100 | > 100 | |
| Contact Bounce Time (ms) | < 5 | < 5 | < 5 | |
1) The electrical lifetime according to ENEC or UL approbation can vary, depending on the corresponding micro switch, under the lifetime indicated above. The type and license numbers for the individual micro switches can be found in “point 6 approvals”.
| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite | Erstelldatum: | Ersteller: | Änderungsdatum: | Geändert von: | Änderungs-Nr. | Datenblatt Nr. | Index |
| 3 of 17 | 07.03.2008 | Schillak | Schöchlin | 9701 | 105.9534 | a | |
Page 4
| Micro Switch for Electrical Rating (Protection Class IP 67) | 0.1 A 250 VAC | 5 A 250 VAC | 10 A 250 VAC |
| Electrical Data | |||
| Switching Voltage max. (VAC) | 250 | 250 | 250 |
| Switching Current max. (A) | 0.1 | 5 | 10 |
| Rated Braking Capacity (W) | 25 | 1500 | 2500 |
| Lifetime 1) (at Rated Braking Capacity) | 50,000 | 50,000 | 10,000 |
¾ Italically written types on request
1) The electrical lifetime according to ENEC or UL approbation can vary, depending on the corresponding micro switch, under the lifetime indicated above. The type and license numbers for the individual micro switches can be found in “point 6 approvals”.

| Ring Illumination | |
|---|---|
| Supply Voltage (VDC) Ring Illumination | 24 |
¾ Other supply voltages on request
\*The degree of protection refers to the area of the movable actuator.
| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite | Erstelldatum: | Ersteller: | Änderungsdatum: | Geändert von: | Änderungs-Nr. | Datenblatt Nr. | Index |
| 4 of 17 | 07.03.2008 | Schillak | Schöchlin | 9701 | 105.9534 | a | |
Page 5
| Point Illumination | Attention: Parts are delivered without series resistor. |
|---|---|
| Characteristics red LED Point Illumination | Forward Current max. 40 mA Forward Voltage at 10 mA = 2.0 VDC Forward Voltage max. = 2.5 VDC |
| Characteristics green LED Point Illumination | Forward Current max. 40 mA Forward Voltage at 10 mA = 2.0 VDC Forward Voltage max. = 2.5 VDC |
| Characteristics blue LED Point Illumination | Forward Current max. 20 mA Forward Voltage at 10 mA = 3.2 VDC Forward Voltage max. = 3.7 VDC |
| Recommendation of series resistors for Point Illumination: | |
| Material | |
| Component | Material |
| Housing | Stainless Steel |
| Actuator | Stainless Steel |
| Light Conductor (Point Illumination) | PC |
| Illuminated Ring (Ring Illumination) | PA |
| Gasket | NBR70 |
| Switcher Collet | PA |
| Intermediate Connector non-illuminated | PA |
| Intermediate Connector illuminated | PA |
| Switcher Adapter | PA |
| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite | Erstelldatum: | Ersteller: | Änderungsdatum: | Geändert von: | Änderungs-Nr. | Datenblatt Nr. | Index |
| 5 of 17 | 07.03.2008 | Schillak | Schöchlin | 9701 | 105.9534 | a | |
Page 6
2.2 Component dimensions
2.2.1 Component dimensions MSM 19 DP
MSM 19 DP ST
MSM 19 DP LE
C
C
22


MSM 19 DP PI
MSM 19 DP RI
C
C



NO COM
Legend
- A = Illumination Area
- B = Actuating Area
- C = Width Across Flats
- D = Knurled Nut
| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite Ers | telldatum: | Ersteller: | Änderungsdatum: | Geändert von: Än | derungs-Nr. | Datenblatt Nr. | Index |
| 6 of 17 07. | 03.2008 | Schillak | Schöchlin 970 | 1 | 105.9534 | a | |
Page 7
2.2.2 Component dimensions MSM 22 DP
MSM 22 DP ST
MSM 22 DP LE


MSM 22 DP PI
MSM 22 DP RI


Legend
- A = Illumination Area
- B = Actuating Area
- C = Width Across Flats
- D = Knurled Nut
| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite | Erstelldatum: | Ersteller: | Änderungsdatum: | Geändert von: | Änderungs-Nr. | Datenblatt Nr. | Index |
| 7 of 17 | 07.03.2008 | Schillak | Schöchlin | 9701 | 105.9534 | a | |
Page 8
2.2.3 Component dimensions MSM 30 DP
MSM 30 DP ST
MSM 30 DP LE




MSM 30 DP PI
MSM 30 DP RI






Legend
- A = Illumination Area
- B = Actuating Area
- C = Width Across Flats
- D = Knurled Nut
| Changes that contribute to technical improvement are subject to alternations | |||||
| Seite Erstelldatum: | Ersteller: Änderungsdatum: | Geändert von: Än | derungs-Nr. Datenbla | tt Nr. | Index |
| 8 of 17 07.03.2008 | Schillak | Schöchlin 97 | 01 105.9534 | a | |
Page 9
2.3 Actuator Tolerance Range


The mounting tolerance range of the actuator varies from 0.2 mm projection length and 0.2 mm short length to the housing edge. The slanting position of the actuator can range within this tolerance.
| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite | Erstelldatum: E | rsteller: | Änderungsdatum: | Geändert von: | Änderungs-Nr. | Datenblatt Nr. | Index |
| 9 of 17 | 07.03.2008 S | chillak | Schöchlin | 9701 | 105.9534 | a | |
Page 10
2.4 Hole dimensions
MSM 19 ST / MSM 19 RI

MSM 22 ST / MSM 22 RI

MSM 30 ST / MSM 30 RI

MSM 19 LE/ MSM 19 PI / MSM 19 RI optional

MSM 22 LE/ MSM 22 PI / MSM 22 RI optional

MSM 30 LE / MSM 30 PI / MSM 30 RI optional

| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite | Erstelldatum: | Ersteller: | Änderungsdatum: | Geändert von: | Änderungs-Nr. | Datenblatt Nr. | Index |
| 10 of 17 | 07.03.2008 | Schillak | Schöchlin | 9701 | 105.9534 | a | |
Page 11
2.5 Starting Torque
| Plastic Nut max. (Nm) | Stainless Steel Nut * max. (Nm) | |
|---|---|---|
| MSM 19 | 4.5 | 12 |
| MSM 22 | 3.5 | 16 |
| MSM 30 | 8 | 50 |
¾ \* on request
2.6 Switching Symbols
MSM ST / MSM LE
MSM PI
MSM RI


COM NO NC
COM NO NC
2.7 Accessories
MSM 22 Installation wrench
Order number: 1141.1337

| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite | Erstelldatum: | Ersteller: | Änderungsdatum: | Geändert von: | Änderungs-Nr. | Datenblatt Nr. | Index |
| 11 of 17 | 07.03.2008 | Schillak | Schöchlin 9 | 701 | 105.9534 | a | |
Page 12
3
ORDER NUMBERS
3.1 Order numbers MSM with micro switches of protection class IP40 (double-pole)
Mounting Diameter (mm)
Ø 19
Ø 22
Ø 30
| Electrical Rating max. 5 A / 125 VAC or 3 A / 250 VAC | |||
|---|---|---|---|
| Standard | 1241.6921.1120000 | 1241.6931.1120000 | 1241.6961.1120000 |
| With Lettering | 1241.6922.1120000 | 1241.6932.1120000 | 1241.6962.1120000 |
| Point Illumination red | 1241.6923.1121000 | 1241.6933.1121000 | 1241.6963.1121000 |
| Point Illumination green | 1241.6923.1122000 | 1241.6933.1122000 | 1241.6963.1122000 |
| Point Illumination blue | 1241.6923.1124000 | 1241.6933.1124000 | 1241.6963.1124000 |
| Ring Illumination red | 1241.6924.1121000 | 1241.6934.1121000 | 1241.6964.1121000 |
| Ring Illumination green | 1241.6924.1122000 | 1241.6934.1122000 | 1241.6964.1122000 |
| Ring Illumination blue | 1241.6924.1124000 | 1241.6934.1124000 | 1241.6964.1124000 |
| Installation Wrench | 1141.1337 | ||
¾ Italically written types on request ¾ At a minimum order quantity of 100 pieces the ring illuminated version with lettering is available on request.
Additional switch types with the following electrical ratings are available on request: 0.1 A@30VDC, 10A@250VAC and also 5A@250VAC with IP67 protection class. For these customized versions a minimum order quantity of 100 pieces has to be fulfilled.
For other types of the MSM product family, please visit:
http://www.schurter.de/wwwsc/con_pg70.asp?language_id=10
| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite | Erstelldatum: | Ersteller: | Änderungsdatum: | Geändert von: | Änderungs-Nr. | Datenblatt Nr. | Index |
| 12 of 17 | 07.03.2008 | Schillak | Schöchlin | 9701 | 105.9534 | a | |
Page 13
3.2 Lettering
The last three digits in the order number define the lettering.
000
No Lettering
001-072 Standard Lettering 101-
Customized Lettering
Example for ordering with lettering
Basic Version
1241.6611.1120XXX
Symbols 001-072
Ordering Indices for Lettering
016= P
001= A
031= 4
046=
061= EIN
017= Q
047= →
002= B
032= 5
062= AUS
048= ←
003= C
018= R
033= 6
063= AUF
049= ↓
004= D
019= S
034= 7
064= AB
050= ↑
005= E
020= T
035= 8
065= ON
021= U
006= F
036= 9
051= %
066= OFF
022= V
037= +
007= G
052= √
067= UP
023= W
008= H
038= −
053= CTRL
068= DOWN
024= X
054= RETURN
009= I
039= .
069= HIGH
025= Y
010= J
040= ×
070= LOW
055= SHIFT
026= Z
011= K
041= ÷
071= ON/OFF
056= LOCK
012= L
027= 0
042= ∗
057= STOP
072= START
013= M
028= 1
043= =
058= ENTER
014= N
029= 2
044= #
059= BACK
045= ↔
015= O
030= 3
060= LINE
| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite | Erstelldatum: | Ersteller: | Änderungsdatum: | Geändert von: | Änderungs-Nr. | Datenblatt Nr. | Index |
| 13 of 17 | 07.03.2008 | Schillak | Schöchlin | 9701 | 105.9534 | a | |
Page 14
Lettering Size
MSM 19 LE / MSM 19 PI :
Single characters:
height 8 mm, font: Helvetica normal DIN1451-1E height 3 mm, font: Helvetica normal DIN1451-1E
Text, max. 3 characters
height 2.5 mm, font: Helvetica condensed DIN1451-3E
Text, max. 6 characters:
capitals height 8 mm, font: True Type, Symbol
Symbols (indices 037-052):
MSM 22 LE / MSM 22 PI :
Single characters:
height 8 mm, font: Helvetica normal DIN1451-1E height 3 mm, font: Helvetica normal DIN1451-1E
Text, max. 3 characters
height 2.5 mm, font: Helvetica condensed DIN1451-3E
Text, max. 6 characters:
capitals height 8 mm, font: True Type, Symbol
Symbols (indices 037-052):
MSM 30 LE / MSM 30 PI :
height 12 mm, font: Helvetica normal DIN1451-1E
Single characters:
height 7 mm, font: Helvetica normal DIN1451-1E
Text, max. 3 characters:
height 3.5 mm, font: Helvetica condensed DIN1451-3E
Text, max. 6 characters:
capitals height 12 mm, font: True Type, Symbol
Symbols (indices 037-052):
MSM 19 RI \* / MSM 22 RI \*:
height 5 mm, font: Helvetica normal DIN1451-1E
Single characters:
height 3 mm, font: Helvetica normal DIN1451-1E
Text, max. 3 characters Symbols (indices 037-052):
capitals height 5 mm, font: True Type, Symbol
MSM 30 RI \*:
height 8 mm, font: Helvetica normal DIN1451-1E
Single characters:
height 3 mm, font: Helvetica normal DIN1451-1E
Text, max. 3 characters:
height 2.5 mm, font: Helvetica condensed DIN1451-3E
Text, max. 6 characters:
capitals height 8 mm, font: True Type, Symbol
Symbols (indices 037-052):
¾ \* At a minimum order quantity of 100 pieces the ring illuminated version with lettering is available on request.
| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite | Erstelldatum: | Ersteller: | Änderungsdatum: | Geändert von: | Änderungs-Nr. | Datenblatt Nr. | Index |
| 14 of 17 | 07.03.2008 | Schillak | Schöchlin | 9701 | 105.9534 | a | |
Page 15
4
PACKAGING
MSM Switch
| MSM 19 | 10 pieces per box with inlay | |
| MSM 22 | 10 pieces per box with inlay | |
| MSM 30 | 1 piece in air cushion bag | 10 pieces per box |
The nuts with gaskets and corresponding micro switches are packed separately and enclosed in the box.

| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite | Erstelldatum: | Ersteller: | Änderungsdatum: | Geändert von: | Änderungs-Nr. | Datenblatt Nr. | Index |
| 15 of 17 | 07.03.2008 | Schillak | Schöchlin | 9701 | 105.9534 | a | |
Page 16
5
QUALIFICATION TEST
5.1 IP Protection Class
IP Protection Class IEC/DIN/EN/ 60529
IP 67
5.2 IK Protection Class Tested Centrically
IK Protection Class DIN EN 50102
IK 07
5.3 ESD Protection ESD-Test according to DIN 61000-4-2:
| 4kV Contact Discharge | MSM DP ST Ø 19; 22; 30 mm |
| 4kV Contact Discharge | MSM DP LE Ø 19; 22; 30 mm |
5.4 Salt Spray Test
Salt spray test according to DIN 50021- SS 24h, 48h and 96h residence time The surface of the stainless steel material is covered with a molecular-passive layer. Only under very unfavourable conditions it is possible, that iron and rust molecules as well as base metals penetrate the passive layer as foreign substances (pollutions) and initiate the rust process. The smoothness of the actuator was not affected. After the residence time the tested samples were cleaned under running water and all rust spots could be removed.
| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite | Erstelldatum: | Ersteller: | Änderungsdatum: | Geändert von: | Änderungs-Nr. | Datenblatt Nr. | Index |
| 16 of 17 | 07.03.2008 | Schillak | Schöchlin | 9701 | 105.9534 | a | |
Page 17
6
APPROVALS
The listed approvals only refer to the micro switch and not to the complete switch.
Micro switch:
| Type | Licence number | ENEC VDE / KEMA | UL 1054 CSA C22.2 NO55 |
|---|---|---|---|
| 1050.1151 | 097550 | DIN EN 61058 | E41791 |
| 1050.1102 | 097550 | DIN EN 61058 | E41791 |
| 1050.1103 | 097550 | DIN EN 61058 | E41791 |
| SS-01 T | 40008425 | DIN EN 61058 | E41515 |
| SS-5 T | 129246 | DIN EN 61058 | E41515 |
| SS-10 T | 125256 | DIN EN 61058 | E41515 |
| DC3GL1AA | 2089323.01 | DIN EN 61058 | E23301 |
| DC1GL1AA | 2089323.01 | DIN EN 61058 | E23301 |
| DC2GL1AA | 2089323.01 | DIN EN 61058 | E23301 |
7
ROHS COMPLIANT
All articles are ROHS-compliant.
| Changes that contribute to technical improvement are subject to alternations | |||||||
| Seite | Erstelldatum: | Ersteller: | Änderungsdatum: | Geändert von: | Änderungs-Nr. | Datenblatt Nr. | Index |
| 17 of 17 | 07.03.2008 | Schillak | Schöchlin | 9701 | 105.9534 | a | |