DATASHEET SEARCH SITE

Document overview

  • PDF pages: 3

Technical content

Page 1

MR100 Series

Vishay Mills

Wirewound Resistor, Ultra Precision,

Epoxy Molded, Axial Lead

FEATURES

PDF page 1 diagram
  • Resistance values up to 6 M
  • Resistance tolerances down to ± 0.01 %
  • Temperature coefficients down to 2 ppm/°C
  • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL MODEL POWER RATING P W 25 °C RESISTANCE RANGE  ± 0.01 %, ± 0.02 %, ± 0.05 %, ± 0.1 % RESISTANCE RANGE  ± 0.25 %, ± 0.5 %, ± 1 % MAXIMUM WORKING VOLTAGE V
MR101 0.120 10 to 400K 1 to 400K 150
MR102 0.175 10 to 750K 1 to 750K 200
MR103 0.200 10 to 750K 1 to 750K 200
MR104 0.150 10 to 500K 1 to 500K 100
MR105 0.200 10 to 1.0M 1 to 1.0M 200
MR106 0.250 10 to 1.2M 1 to 1.2M 300
MR107 0.330 10 to 2.5M 1 to 2.5M 400
MR108 0.400 10 to 3.8M 1 to 3.8M 300
MR110 0.500 10 to 3.8M 1 to 3.8 M 400
MR111 0.500 10 to 3.8M 1 to 3.8M 400
MR112 0.750 10 to 6.0M 1 to 6.0M 600
MR114 1.000 10 to 6.0M 1 to 6.0M 800
MR115 1.500 10 to 6.0M 1 to 6.0M 900
MR116 2.000 10 to 6.0M 1 to 6.0M 1000
PDF page 1 diagram

Revision: 17-Aug-12

Document Number: 31814

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Page 2

MR100 Series

Vishay Mills

DIMENSIONS in inches [millimeters]

PDF page 2 diagram
GLOBAL MODEL DIMENSIONS in inches [millimeters]
L ± 0.025 [0.635] D ± 0.005 [0.127] LD ± 0.002 [0.051]
MR101 0.250 [6.35] 0.187 [4.75] 0.025 [0.635]
MR102 0.375 [9.52] 0.187 [4.75] 0.025 [0.635]
MR103 0.450 [11.43] 0.187 [4.75] 0.025 [0.635]
MR104 0.250 [6.35] 0.250 [6.35] 0.025 [0.635]
MR105 0.375 [9.52] 0.250 [6.35] 0.032 [0.813] (1)
MR106 0.500 [12.70] 0.250 [6.35] 0.032 [0.813] (1)
MR107 0.750 [19.05] 0.250 [6.35] 0.032 [0.813] (1)
MR108 0.500 [12.70] 0.375 [9.52] 0.032 [0.813]
MR110 0.750 [19.05] 0.375 [9.52] 0.032 [0.813]
MR111 0.750 [19.05] 0.375 [9.52] 0.032 [0.813]
MR112 1.000 [25.40] 0.375 [9.52] 0.032 [0.813]
MR114 1.000 [25.40] 0.500 [12.70] 0.032 [0.813]
MR115 1.500 [38.10] 0.500 [12.70] 0.032 [0.813]
MR116 2.000 [50.80] 0.500 [12.70] 0.032 [0.813]

Note (1) 0.025" [0.635] available, this is called out by putting an “S” in the SPECIAL section of the part number.

MATERIAL SPECIFICATIONS

DERATING

PDF page 2 diagram

Element: Nickel-chrome alloy, other materials available depending on TC requirements Core: Molded epoxy Encapsulant: Epoxy Standard Terminals: 100 % matte tinned copper Part Marking: MILLS, model, value, tolerance, date code Note

  • Due to resistor size limitations some resistors will have minimal information marked on parts
TECHNICAL SPECIFICATIONS
PARAMETER UNIT MR100 RESISTOR CHARACTERISTICS
Temperature Coefficient ppm/°C ± 10 > 100 ; ± 20 for 10  to 100 ; ± 30 for 1  to 9.99 
Terminal Strength lb 4.5
Dielectric Withstanding Voltage V AC 750
Operating Temperature Range °C - 55 to 145
Maximum Working Voltage V (P x R)1/2

Revision: 17-Aug-12

Document Number: 31814

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Page 3

Legal Disclaimer Notice

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.

Revision: 02-Oct-12

Document Number: 91000