MP9100 ETC1

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

RHOPOINT COMPONENTS LTD. Holland Road Hurst Green Oxted, Surrey, RH8 9AX Tel: +44 (0)1883 717988 Fax: +44 (0)1883 712938 Email: components@rhopoint.co.uk Website: www.rhopoint.co.uk/components/ © 2000 Caddock Electronics, Inc. CAD KDOC IL-127.010 0.195 ± 0.010 (4.95 ± 0.26) 0.095 ± 0.010 (2.41 ± 0.26) 0.815 ± 0.010 (20.70 ± 0.26) 0.620 ± 0.010 (15.75 ± 0.26) 0.110 ± 0.030 (2.79 ± 0.76) 0.570 ± 0.050 (14.48 ± 1.27) 0.143 ± 0.004 (3.63 ± 0.10) Dia. 0.143 ± 0.015 (3.63 ± 0.38) 0.060 ± 0.004 (1.52 ± 0.10) 0.400 ± 0.010 (10.16 ± 0.26) 0.210 ± 0.010 (5.33 ± 0.26) CL MP9100 50.0 DIMENSIONS IN INCHES AND (MILLIMETERS) Electrical Specifi cations: Temperature Coeffi cient: TC referenced to +25°C, ∆R taken at +175°C 0.50 ohm and above, -20 to +80 ppm/°C 0.050 ohm to 0.49 ohm, 0 to +150 ppm/°C Inductance: 10 nH typical in series when mea- sured at the shoulder of the lead Capacitance: <1 pf typical without heat sink DWV: 1500 V RMS AC isolation to the mounting surface or a clip in contact with the top surface Insulation Resistance: 10,000 Megohms, min. The resistor element is electrically isolated from the mounting surface. Momentary Overload: 1.5 times rated power for 5 seconds, ∆R ±(0.5 percent + 0.0005 ohm) max., based on a case temperature of +175°C max. Environmental Specifi cations: Load Stability: 2000 hours at rated power ∆R less than ±(1% +0.0005Ω ) Moisture Resistance: Mil-Std-202, Method 106, ∆R ±(0.5 percent + 0.0005 ohm) max. Thermal Shock: Mil-Std-202, Method 107, Cond. F, ∆R ±(0.5 percent + 0.00005 ohm) max. Shock: 100G, Mil-Std-202, Method 213, Cond. I, ∆R ±(0.4 percent + 0.0005 ohm) max. Vibration, High Frequency: Mil-Std 202, Method 204, Condition D, ∆R±(0.4% +0.0005Ω ) max. Terminal Strength: Mil-Std-202, Method 211, Cond. A (Pull Test) 5 lbs., ∆R ±(0.2 percent + 0.0005 ohm) max. Measurement Note: Resistance measurements shall be made at 0.2 inch (5.08 mm) from the resistor body For more information please see our website: Application Note: CAD-9100-1 These products are covered by one or more patents, also patents pending. MP9100 TO-247 Kool-Pak® Power Film Resistor TO-247 Style Power Package 100 Watt Non-Inductive Design  100 watt continuous power at +25°C case temperature  TO-247 package utilizes proven power semiconductor thermal solutions  Equivalent to UL94 V-O fl ammability rating

  • Excellent pulse/surge performance
  • Non-inductive design for high speed switching, snubbers and rf applications
  • Safe and reliable operation up to +175°C case temperature
  • Electrically isolated case Standard Resistance Values: Tolerance: 1% Standard 0.050 Ω 0.10 Ω 0.12 Ω 0.15 Ω 0.20 Ω 0.25 Ω 0.30 Ω 0.33 Ω 0.39 Ω 0.50 Ω 0.75 Ω 1.00 Ω 1.50 Ω 2.00 Ω 2.20 Ω 2.50 Ω 3.00 Ω 3.30 Ω 3.90 Ω 5.00 Ω 8.00 Ω 10.0 Ω 12.0 Ω 15.0 Ω 18.0 Ω 20.0 Ω 22.0 Ω 25.0 Ω 27.0 Ω 33.0 Ω 39.0 Ω 47.0 Ω 50.0 Ω 56.0 Ω 75.0 Ω 100 Ω For custom values and tolerances contact applications engineering Ordering Information: Parts shipped 25 per anti static plastic tube 25 100 175 CASE TEMPERATURE, C 100 o RATED POWER OR PULSE ENERGY, % Mounting Note: Mount on a smooth, clean and fl at heat sink surface with a thermal interface material, such as thermal grease. The entire exposed ceramic portion must be in contact with the heat sink. When screw mounting, use a Belleville washer which provides a mounting force of 150 to 300 pounds (665 to 1330 N). Mounting torque to avoid package damage is 8 in-lbs. (0.90 N-m). If a spring clip is used, a clip force of 4.5 to 35 pounds (20 to 155 N) is recommended All power and overload ratings are derated based upon case temperature using the derating curve. The case temperature is measured at the center of the ceramic mounting surface, with the part properly mounted and under electrical load Single Pulse/Surge Ratings: (1) TC = 25°C with no continuous power applied, derate per Fig. 1 Duration 10 µsec 100 µsec 1 msec 10 msec 100 msec 250 msec V maximum Energy 0.07 0.25 0.9 3.5 600 Units Joules Joules Joules Joules Joules Joules volts peak (1) For multiple pulses/surge ratings please contact applications engineering for assistance Derating Using Case Temperature (TC ): MP9100 - 0.050 - 1% Model Number: Resistor Value: (see table) Tolerance (1% Std) Maximum Ratings Rating Symbol Value Unit Power Dissipation: With heat sink TC =25°C 100 Watts Thermal Resistance: Resistance film (J) to Case (C) 1.5 ˚C/W Operating and Storage Temperature Range -55 to +175 ˚C RθJC Free Air at 25°C without heat sink 3.5 Watts P D P D TC ,TJ, TSTG www.caddock.com (Fig. 1) Derating Curve