MP35S NELLSEMI
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
FEATURES
UL recognition file number E320098 TYPICAL APPLICATIONS General purpose use in AC/DC bridge full wave Case: GBPC / MP Epoxy meets UL 94 V-O flammability rating Terminals: Nickel or silver plated on wire leads,solderable per J-STD-002 and JESD22-B102. Suffix Polarity: As marked Weight: 21g (0.74 ozs) SEMICONDUCTOR RoHS RoHS Nell High Power Products Compliant to RoHS High surge current capability Solder dip 260°C, 40s rectification for power supply, home appliances, office equipment, industrial automation applications. MECHANICAL DATA Mounting Torque: 20 inches-lbs. max. (M5 screw) MP35S letter “S” added to indicate wire leads (e.g. MP3506S). Single-Phase Bridge Rectifier, 35A MP3506S Thru MP3512S 5.085.085.08 28.50 10.50 28.50 14.0 Min. Ø 5.2 All dimensions in inches Page 1 of 3www.nellsemi.com +~- Low thermal resistance
MAXIMUM RATINGS (T = 25°C unless otherwise noted)A PARAMETER V V SYMBOL MP35..S UNIT 420 560 700 840 600 800 1000 1200 06 1210 600 800 1000 1200 V Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified output current (Fig.1) Peak forward surge current single sine-wave superimposed on rated load Rating (non-repetitive, for t greater than 1 ms and less than 8.3 ms) for fusing RMS isolation voltage from case to leads Operating junction storage temperature range VRRM VRMS IFSM VDC IF(AV) VISO 2I t TJ 2500 660 -40 to 150 400 2A s A A V ºC ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted)A PARAMETER V µA SYMBOL MP35..S UNIT 0806 1210 Maximum instantaneous forward drop per diode Maximum reverse DC current at rated DC blocking Typical junction capacitance per diode VF IR CJ 300 3000 1.1 pF voltage per diode TEST CONDITIONS THERMAL CHARACTERISTICS (T = 25°C unless otherwise noted)A PARAMETER °C/W SYMBOL MP35..S UNIT 0806 1210 Typical thermal resistance (1) With heatsink (1)RθJC 1.4 (2) Bolt down on heatsink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with Notes M5 screw PRIMARY CHARACTERRISTICS IF(AV) 35A VRRM 600V to 1200V 1.1V 2 µA 150ºC IFSM IR VF TJ max. 400A Storage temperature range TSTG -25 to 125 ºC I = 17.5AF T = 25°CA 4V, 1MHz T = 150°CA MP35S Page 2 of 3www.nellsemi.com
0.01 0.1 1.0 100 0 15050 100 100 200 300 400 500 1 10 100 www.nellsemi.com MP35S T = 25°CJ Pulse Width = 300 µs Single half-sine-wave (JEDEC method) T = 150°CJ Mounted on a 220x220x50 mm AL plate heatsink Resistive or lnductive load Fig.1 On-state current and voltage Fig.2 Case temperature vs on-state average current Fig.3 On-state surge current vs. cycles On-state surge current(A) Peak on-state current (A) Peak on-average current (A) Peak on-state voltage(V) Case temperature (ºC) Cycles @50Hz