MMK ETC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 21

Technical content

50 63 100 250 400 630 1000 30 40 63 160 200 220 250 ±20%, ±10% standard, ±5%. –55 ... +100°C Above +85°C DC and AC voltage derating is 1.25%/°C. +85°C IEC 60068-1, 55/100/56 DIN 40040, FME –55 ... +100°C Average relative humidity ≤ 75 % RH = 95% for 30 days per year. RH = 85% for further days limited by average value per year, occasional slight condensation permitted. 1.6 x U R VDC for 2s Max. 2% after a 2 year storage period at a temperature of +10 ... +40°C and a relative humidity of 40...60%. Operational life > 200 000 h. Failure rate < 3 FIT , T = +40°C, U = 0.5 x UR. Failure criteria according to DIN 44122. dU/dt according to article table. For peak to peak voltages lower than rated voltage (UPP < UR), the specified dU/dt can be multiplied by the factor U R/UPP. +400 (±200) ppm/°C at 1 kHz Approximately 6 nH/cm for the total length of capacitor winding and the leads. MMK

  • Metallized polyester  According to CECC 30401-042, IEC 60384-2, DIN 44122 TYPICAL APPLICATIONS Bypassing, signal coupling. General purpose for highest reliability. CONSTRUCTION Metallized polyester film capacitor. Radial leads of tinned wire are electrically welded to the contact metal layer on the ends of the capacitor winding. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0. TECHNICAL DATA L H B p l∅ d 0.5 b p d std I max I b 10.0 ± 0.4 0.6 4 +1 30 ± 0.4 15.0 ± 0.4 0.8 4 +1 30 ± 0.4 22.5 ± 0.4 0.8 4 +1 30 ± 0.4 27.5 ± 0.4 0.8 4 +1 30 ± 0.4 37.5 ± 0.5 1.0 4 +1 30 ± 0.7 Rated voltage UR, VDC Rated voltage UR, VAC Capacitance, µF Capacitance tolerance Category temperature range Voltage derating Rated temperature Climatic category Test voltage Capacitance drift Reliability Maximum pulse steepness: Temperature coefficient Self inductance NEW OPTIMIZED SERIES IN SMALLER DIMENSIONS There are now many parts in the MMK series in smaller sizes than before. The capacitance range has also been extended. These parts are marked with * in the article table. The size codes for the bigger old parts are shown in the article table next to the new article code. Table with all size codes on page 18.

Minimum values between terminals. Measured at +20°C, according to IEC 60384-2. C ≤ 0.33 µF C > 0.33 µF UR ≤ 100V 15000 MΩ 5000 s UR > 100V 30000 MΩ 10000 s Maximum values at +23°C C ≤ 0.1 µF 0.1 µF < C ≤ 1.0 µF C > 1.0 µF MMK5 1 kHz 0.8% 0.8% 0.8% 100 kHz 2.5% 3.0% 10 kHz 1.5% 1.5% 100 kHz 3.0% MMK Dissipation factor tanδ Insulation resistance TYPICAL DATA Capacitance vs. temperature (at 1 kHz) Capacitance vs. frequency (at +23°C) Insulation resistance vs. temperature Dissipation factor vs. temperature Dissipation factor vs. frequency (at +23°C) Resonance frequencies MMK 5 Resonance frequencies C/C% 0.1 1.0 10 100 kHz C/C% +10 –50 –25 0 +25 +50 +75 +100 C tanδ % 0.1 1.0 10 100 kHz 0.1 tanδ % 100 kHz 1 kHz 10 kHz –50 –25 0 +25 +50 +75 +100 C 1.5 0.5 M  µF 105 104 –50 –25 0 +25 +50 +75 +100 C Z ( ) 0.1 1.0 10 0.001 0.01 0.1

100 MHz

1.0 0.1 0.01 Z ( ) 0.1 1.0 10 0.001 0.01 0.1 1.0 0.1 0.01 TECHNICAL DATA

RATED AC VOLTAGE VS. FREQUENCY ENVIRONMENTAL TEST DATA MARKING  Capacitance  T olerance code  Rated voltage  Capacitor family code MMK  Manufacturing date code T = +40°C, RH = 93%, t = 56 days. ∆ C/C ≤ ±5%, ∆ tanδ ≤ 0.005 (1kHz), IR after test 0.5 x IR min. R), t = 2000 h. ∆ C/C ≤ ±5%, ∆ tanδ ≤ 0.005 (1kHz) ∆ tanδ ≤ 0.010 (100kHz) IR after test 0.5 x IR min. Damp heat test Test conditions: Test criteria: Endurance test Test conditions: Test criteria:

ORDERING INFORMATION

See article table and pages 18 to 23 for options and article code construction. The standard quantity/reel is for 360 mm reel. If 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity. Ueff (V) 100 0.1 1.0 10 100 0.01 µF 0.047 µF 0.22 µF 1 µF kHz 4.7 µF Ueff (V) 100 0.1 1.0 10 100 0.001 µF 0.01 µF 0.1 µF 0.33 µF kHz 1.2 µF Ueff (V) 100 0.1 1.0 10 100 kHz 50 2.2 µF 0.47 µF 0.047 µF 0.01 µF 12 µF Ueff (V) 0.1 1.0 10 100 kHz 0.1 µF 1 µF 6.8 µF 68 µF U rms (V) 100 0.1 1.0 10 100 0.47 µF 0.22 µF 0.047 µF 0.01 µF kHz 2.2 µF Ueff (V) 6.8 µF 0.033 µF 0.1 µF 1 µF 0.1 1.0 10 100 kHz 33 µF Ueff (V) 0.1 1.0 10 100 kHz 0.15 µF0.22 µF1.0 µF Ueff (V) 0.1 1.0 10 100 kHz 0.1 µF 1 µF 6.8 µF 68 µF Ueff (V) 6.8 µF 0.033 µF 0.1 µF 1 µF 0.1 1.0 10 100 kHz 33 µF MMK5 50/30 MMK5 63/40 MMK5 100/63 Urms (V))) Urms (V))) Urms (V))) Urms (V))) Urms (V))) Urms (V))) Urms (V)))Urms (V)))Urms (V)))

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK

50 VDC/30 VAC

LEAD SPACING 7.5 MM ARTICLE TABLE * Existing capacitance value in smaller dimensions or new capacitance value.

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK LEAD SPACING 7.5 MM LEAD SPACING 10 MM LEAD SPACING 15 MM * Existing capacitance value in smaller dimensions or new capacitance value.

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK

63 VDC/40 VAC

  • Existing capacitance value in smaller dimensions or new capacitance value. LEAD SPACING 5 MM LEAD SPACING 7.5 MM

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK

  • Existing capacitance value in smaller dimensions or new capacitance value. LEAD SPACING 7.5 MM LEAD SPACING 10 MM

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK

  • Existing capacitance value in smaller dimensions or new capacitance value. LEAD SPACING 10 MM LEAD SPACING 15 MM LEAD SPACING 22.5 MM 10 * 9.0 18.5 26.0 22.5 168 3 MMK22,5 106K63D15L4 TRAY D18 12 * 10.5 19.0 26.0 22.5 264 3 MMK22,5 126K63D18L4 TRAY D16 15 * 11.0 21.5 26.0 22.5 253 3 MMK22,5 156K63D16L4 TRAY --- 18 * 15.5 24.5 26.0 22.5 176 3 MMK22,5 186K63D19L4 TRAY --- 22 * 15.5 24.5 26.0 22.5 176 3 MMK22,5 226K63D19L4 TRAY --- LEAD SPACING 27.5 MM 10 10.5 20.5 31.5 27.5 216 2 MMK27,5 106K63F11L4 TRAY 12 10.5 20.5 31.5 27.5 216 2 MMK27,5 126K63F11L4 TRAY 15 11.5 22.5 31.5 27.5 198 2 MMK27,5 156K63F12L4 TRAY 18 11.5 22.5 31.5 27.5 198 2 MMK27,5 186K63F12L4 TRAY 22 14.5 24.5 31.5 27.5 153 2 MMK27,5 226K63F13L4 TRAY 27 17.5 28.0 31.5 27.5 126 2 MMK27,5 276K63F14L4 TRAY 33 17.5 28.0 31.5 27.5 126 2 MMK27,5 336K63F14L4 TRAY LEAD SPACING 37.5 MM 27 13.0 24.0 41.0 37.5 140 1 MMK37,5 276K63R05L4 TRAY 33 15.0 26.0 41.0 37.5 119 1 MMK37,5 336K63R04L4 TRAY 39 15.0 26.0 41.0 37.5 119 1 MMK37,5 396K63R04L4 TRAY 47 16.5 32.0 41.0 37.5 105 1 MMK37,5 476K63R02L4 TRAY 56 19.0 36.0 41.0 37.5 91 1 MMK37,5 566K63R03L4 TRAY 68 19.0 36.0 41.0 37.5 91 1 MMK37,5 686K63R03L4 TRAY 82 21.0 38.0 41.0 37.5 84 1 MMK37,5 826K63R06L4 TRAY

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK * Existing capacitance value in smaller dimensions or new capacitance value.

100 VDC/63 VAC

LEAD SPACING 7.5 MM

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK LEAD SPACING 7.5 MM LEAD SPACING 10 MM * Existing capacitance value in smaller dimensions or new capacitance value.

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK LEAD SPACING 22.5 MM LEAD SPACING 27.5 MM 10 * 11.5 22.5 31.5 27.5 198 3 MMK27,5 106K100F12L4 TRAY F13 12 * 11.5 22.5 31.5 27.5 198 3 MMK27,5 126K100F12L4 TRAY F14 15 * 14.5 24.5 31.5 27.5 153 3 MMK27,5 156K100F13L4 TRAY F14 18 * 17.5 28.0 31.5 27.5 126 3 MMK27,5 186K100F14L4 TRAY --- 22 * 17.5 28.0 31.5 27.5 126 3 MMK27,5 226K100F14L4 TRAY --- 27 * 19.0 29.0 31.5 27.5 117 3 MMK27,5 276K100F15L4 TRAY --- 33 * 21.0 30.0 31.5 27.5 108 3 MMK27,5 336K100F16L4 TRAY --- LEAD SPACING 37.5 MM 12 13.0 24.0 41.0 37.5 140 2 MMK37,5 126K100R05L4 TRAY 15 * 13.0 24.0 41.0 37.5 140 2 MMK37,5 156K100R05L4 TRAY R04 18 * 13.0 24.0 41.0 37.5 140 2 MMK37,5 186K100R05L4 TRAY R04 22 * 15.0 26.0 41.0 37.5 119 2 MMK37,5 226K100R04L4 TRAY R02 27 * 15.0 26.0 41.0 37.5 119 2 MMK37,5 276K100R04L4 TRAY R03 33 * 16.5 32.0 41.0 37.5 105 2 MMK37,5 336K100R02L4 TRAY R03 39 * 19.0 36.0 41.0 37.5 91 2 MMK37,5 396K100R03L4 TRAY --- 47 * 19.0 36.0 41.0 37.5 91 2 MMK37,5 476K100R03L4 TRAY --- 56 * 21.0 38.0 41.0 37.5 84 2 MMK37,5 566K100R06L4 TRAY --- * Existing capacitance value in smaller dimensions or new capacitance value.

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK

250 VDC/160 VAC

  • Existing capacitance value in smaller dimensions or new capacitance value. LEAD SPACING 5 MM LEAD SPACING 7.5 MM

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK

  • Existing capacitance value in smaller dimensions or new capacitance value. LEAD SPACING 7.5 MM LEAD SPACING 10 MM LEAD SPACING 15 MM

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK

  • Existing capacitance value in smaller dimensions or new capacitance value. LEAD SPACING 22.5 MM LEAD SPACING 27.5 MM 10 * 21.0 30.0 31.5 27.5 108 5 MMK27,5 106K250F16L4 TRAY --- LEAD SPACING 37.5 MM 10 * 15.0 26.0 41.0 37.5 119 3 MMK37,5 106K250R04L4 TRAY R03 12 * 16.5 32.0 41.0 37.5 105 3 MMK37,5 126K250R02L4 TRAY R03 15 * 16.5 32.0 41.0 37.5 105 3 MMK37,5 156K250R02L4 TRAY --- 18 * 19.0 36.0 41.0 37.5 91 3 MMK37,5 186K250R03L4 TRAY --- 22 * 21.0 38.0 41.0 37.5 84 3 MMK37,5 226K250R06L4 TRAY ---

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK

400 VDC/200 VAC

LEAD SPACING 7.5 MM * Existing capacitance value in smaller dimensions or new capacitance value.

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK LEAD SPACING 22.5 MM * Existing capacitance value in smaller dimensions or new capacitance value.

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK

  • Existing capacitance value in smaller dimensions or new capacitance value. LEAD SPACING 22.5 MM LEAD SPACING 27.5 MM LEAD SPACING 37.5 MM 10 * 21.0 38.0 41.0 37.5 84 5 MMK37,5 106K400R06L4 TRAY --- LEAD SPACING 5 MM

630 VDC/220 VAC

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK

  • Existing capacitance value in smaller dimensions or new capacitance value. LEAD SPACING 7.5 MM LEAD SPACING 10 MM LEAD SPACING 15 MM

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK

  • Existing capacitance value in smaller dimensions or new capacitance value. LEAD SPACING 15 MM LEAD SPACING 22.5 MM LEAD SPACING 27.5 MM LEAD SPACING 37.5 MM

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK

1000 VDC/250 VAC

  • Existing capacitance value in smaller dimensions or new capacitance value. LEAD SPACING 5 MM LEAD SPACING 7.5 MM LEAD SPACING 10 MM

Capaci- Max dimensions in mm Quantity per package Max Old tance dU/dt MMK µF B H L p Bulk Tray Reel Ammo V/µs Article code size MMK

  • Existing capacitance value in smaller dimensions or new capacitance value. LEAD SPACING 15 MM LEAD SPACING 22.5 MM LEAD SPACING 27.5 MM LEAD SPACING 37.5 MM