MMA20312BVT1 1800-2200 MHz, 27.2 dB, 30.5 dBm InGaP HBT Linear Amplifier - Data Sheet
Document overview
- Manufacturer or author: Freescale Semiconductor
- PDF pages: 18
Technical content
Features
Frequency: 1800- -2200 MHz P1dB: 30.5 dBm @ 2140 MHz (CW Application Circuit) Power Gain: 26.4 dB @ 2140 MHz (CW Application Circuit) OIP3: 44.5 dBm @ 2140 MHz (W- -CDMA Application Circuit) Active Bias Control (adjustable externally) Single 3 to 5 V Supply Cost- -effective 12- -pin, 3 mm QFN Surface Mount Plastic Package In Tape and Reel. T1 Suffix = 1,000 Units, 12 mm Tape Width, 7- -inch Reel. Table 1. Typical Performance(1)
- VCC1 =V CC2 =V BIAS =5V d c ,TA =2 5C, 50 ohm system,
Table 2. Maximum Ratings Table 3. Thermal Characteristics Select Documentation/Application Notes - - AN1955. Freescale Semiconductor, Inc., 2011, 2014.All rights reserved.
Freescale Semiconductor, Inc. Table 4. Electrical Characteristics(VCC1 =V CC2 =V BIAS = 5 Vdc, 2140 MHz, TA =2 5C, 50 ohm system, in Freescale W- -CDMA Table 5. ESD Protection Characteristics Table 6. Moisture Sensitivity Level
- Specified data is based on performance of soldered down part in W- -CDMA application circuit.
Figure 1. Functional Block Diagram Figure 2. Pin Connections
Freescale Semiconductor, Inc. Figure 3. MMA20312BV Test Circuit Schematic — TD- -SCDMA, 5 Volt Operation Table 7. MMA20312BV Test Circuit Component Designations and Values — TD- -SCDMA, 5 Volt Operation Note: Component numbers C6, C7 and C9 are labeled on board but not placed. C10, C11, C12, C14 and C15 are intentionally omitted.
Freescale Semiconductor, Inc. Figure 4. MMA20312BV TestCircuit Component Layout — TD- -SCDMA, 5 Volt Operation (1) VBIAS [Board] supplies VBA1,V BA2 and VBIAS [Device]. Note: Component numbers C6*, C7* and C9* are labeled on board but not placed. Note: Component numbers C10, C11, C12, C14 and C15 are intentionally omitted.
Freescale Semiconductor, Inc. Figure 11. MMA20312BV Test Circuit Schematic — W- -CDMA, 5 Volt Operation Table 8. MMA20312BV Test Circuit Component Designations and Values — W- -CDMA, 5 Volt Operation Note: Component numbers C6 and C7 are labeled on board but not placed.C10, C11, C12, C14 and C15 are intentionally omitted.
Freescale Semiconductor, Inc. Figure 12. MMA20312BV Test Circuit ComponentLayout — W- -CDMA, 5 Volt Operation (1) VBIAS [Board] supplies VBA1,V BA2 and VBIAS [Device]. Note: Component numbers C6* and C7* are labeled on board but not placed. Note: Component numbers C10, C11, C12, C14 and C15 are intentionally omitted.
Freescale Semiconductor, Inc. Figure 16. MMA20312BV Test Circuit Schematic — IS- -95, 3.3 Volt Operation Table 9. MMA20312BV Test Circuit Component Designations and Values — IS- -95, 3.3 Volt Operation Note: Component numbers C6, C7, C18 and C19 are labeled on board but not placed. C10, C11, C12, C14 and C15 are intentionally omitted.
Freescale Semiconductor, Inc. Figure 17. MMA20312BV Test Circuit ComponentLayout — IS- -95, 3.3 Volt Operation (1) VBIAS [Board] supplies VBA1,V BA2 and VBIAS [Device]. Note: Component numbers C6*, C7*, C18* and C19* are labeled on board but not placed. Note: Component numbers C10, C11, C12, C14 and C15 are intentionally omitted.
Freescale Semiconductor, Inc. MMA20312BVT1 PACKAGE DIMENSIONS
Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc. MMA20312BVT1
Freescale Semiconductor, Inc. PRODUCT DOCUMENTATION, SOFTWARE AND TOOLS Refer to the following resources to aid your design process. Application Notes AN1955: Thermal Measurement Methodology of RF Power Amplifiers Software .s2p File Development Tools Printed Circuit Boards For Software and Tools, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to Software & Tools on the part’s Product Summary page to download the respective tool. FAILURE ANALYSIS At this time, because of the physical characteristics of the part, failure analysis is limited to electrical signature analysis. In cases where Freescale is contractually obligated to perform failure analysis (FA) services, full FA may be performed by third party vendors with moderate success. For updates contact your local Freescale Sales Office.
REVISION HISTORY
The following table summarizes revisions to this document. Revision Date Description 0 Aug. 2011 Initial Release of Data Sheet 1 Dec. 2011 Updated minimum operating voltage from 3.3 V to 3 V to reflect actual device capability, p. 1 All references to “VCTRL” in the data sheet tables, test circuitschematics and component layouts is replaced with “VBIAS”. VBIAS is the supply voltage which sets the internal bias conditions via pins 1, 2, and 12, pp. 1- -3, 5- -7, 9, 10, 12. Footnote “(1) VBIAS [Board] supplies VBA1,V BA2 and VBIAS [Device]” added to test circuit component layouts, pp. 4, 8, 11. 2 Sept. 2014 Table 2, Maximum Ratings: updated Junction Temperature from 150C to 175C to reflect recent test results of the device, p. 1 Added Failure Analysis information, p. 17
Freescale Semiconductor, Inc. MMA20312BVT1 Information in this document is provided solely to enablesystem and software implementers to use Freescale products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits based on the information in this document. Freescale reserves the right to make changes without further notice to any products herein. Freescale makes no warranty, representation, or guarantee regarding the suitability of its products for any particularpurpose, nor does Freescale assume any liability arisingout of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. All operating parameters, including “typicals,” must be validated for each customer application by customer’s technical experts. Freescale does not convey any license under its patent rights nor the rights of others. Freescale sells products pursuant to standard terms and conditions of sale, which can be found at the following address: freescale.com/SalesTermsandConditions. Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., respective owners. E 2011, 2014 Freescale Semiconductor, Inc. How to Reach Us: Home Page: freescale.com Web Support: freescale.com/support Document Number: MMA20312BV Rev. 2, 9/2014