DATASHEET SEARCH SITE
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 20
Technical content
Over 29 Years of Technical Expertise and Innovation2 MMIC Amplifiers MMIC AMPLIFIERS High Performance/Quality MMIC Based on InGaP HBT , pHEMT , and Linear MESFET Technologies High Linearity, Fully Matched WiMax Power Amplifiers High Linearity, Broadband Gain Blocks Military Screening Available on Hermetically Sealed Package Products Low Cost Commercial Products
Over 29 Years of Technical Expertise and Innovation 3 MMIC AMPLIFIERS MMIC AMPLIFIERS
Over 29 Years of Technical Expertise and Innovation4 MMIC Amplifiers MMIC AMPLIFIERS
Over 29 Years of Technical Expertise and Innovation 5 Space / Hi-Rel Products Space / Hi=Rel Products Model Pkg/ Chip Freq (GHz) Linear Gain Typ/Min (dB) Gain Flatness Typ/MAX (±dB) Input RL Typ (dB) Output RL Typ (dB) NF Typ (dB) Pout @ -1 dB Typ (dBm) OIP3 Typ (dBm) Vdd (V) DC Current Typ/Max (mA) LN-162315-H4 H4 1.6-2.3 26 0.3 16 16 1.5 12 - 5 38 LN-141510-H4 H4 0.150 28 1.0 12 10 1.0 16 26 12 30 GM-141526-H4 H4 0.150 20 1.0 14 14 5.0 26 37 12 150 Model Pkg/ Avail. Gate Width / Length (um) Gate Layout Method Gate Drain Source Bond Qty Chip Thick- ness & VIA (mil.) S.S. Gain @ 12 GHz Typ/Min (dB) N.F. @
12 GHz
(dB) Ga @ N.F. @ (dB) P-1dB @ (dBm) IP3 @ (dBm) Chip Size (um - um) Ideal Circuit Space Qualified Low Noise Amplifiers Space Qualified and Hi-Rel GaAs FETs MwT has been providing components and semiconductor devices to the space industry since 1985. MwT performs assembly, testing, screening, and qualifications testing for microwave semiconductor devices, microwave components and subsystems based on MIL-PRF-38534 and according to military and government Hi-Rel standards such as MIL-PRF-38535, MIL-STD-202, MIL-STD-883, MIL-STD-750, MIL-STD-810, MIL-Q-9858, MIL-STD-19500 and MIL-I-45208. Some of MwT’s space qualified products are highlighted in this section. Equivalent screening to MIL-PRF-38534 class H and K, and NASA programs. Capabilities Products Available for Space Screening GaAs FETs Microwave Bipolar Transistors Microwave Diodes Microwave Components such as hybrid amplifiers Microwave Subsystems Microwave Amplifiers Screening Element Evaluation, Group A, B, C, and D Assembly and 100% Screening Qualification Testing Testing DC and RF Parameters Program Management ISO Qualified Quality System
Over 29 Years of Technical Expertise and Innovation6 GaAs FETs/PHEMTs/HFETs GaAs FETs/PHEMTs/HFETs Model Package Available Sealed/ Hermetic Gate Width/ Length (um) Gate Layout Method Gate Drain Source Bond Pads Chip Thick- ness, VIA (mil) S.S. Gain @ 12 GHz Typ/Min (dB) N.F. @ (dB) Ga @ N.F. (dB) P-1dB @ (dBm) IP3 @ (dBm) Chip Size (um - um) MwT-1789 SOT-89 2400 / 0.8 Interdigit 4, 4, 5 4, no -- (3) 14.0 (1) 28.0 46 1130 • 279 MwT-1789SB SOT-89 2400 / 0.8 Interdigit 4, 4, 5 4, no -- (3) 18.0 (1) 28.0 44 1130 • 279 FETs* Ultra Linear, High Dynamic Range, Low Phase Noise GaAs Process is Approved for Space Applications with Proven Reliability Commercial, Industrial, Military, and Space Grades Sample Bond Pull, Die Shear, Wafer DC Burn In, and Bake Tests for wafer evaluation per MILPRF-38534 100% Die Probe Test with Data Recorded 100% Visual Inspection (to level 1, 3, or 4) 100% Idss Match to Provide Performance Consistency RF Sample Test Capability Available Upon Request Standard and Custom Device Specifications Hi-Rel and Space-Rel Screening Options Available JAN, JANTX, JANTXV , JANS RoHS (lead-free) Compliant Product Available Available in Chip and Package SB = Self-Biased * Consult Factory for Available Packaging: 70 / 73 / 71 / 89 / Q3. ** Low Phase Noise MwT Standard GaAs FETs / PHEMTs RF Properties (DC Properties Listed on the next page)
Over 29 Years of Technical Expertise and Innovation 7 GaAs FETs/PHEMTs/HFETs GaAs FETs / PHEMTs / HFETs Model Device Type IDSS Range Min/Max (mA) Gm Tested Vds/Vgs (V/V) Gm Typ/Min (mS) Vp Tested at Vds/Ids (V/mA) Vp Typ/Max (-V) Bvgso Test- ed Igs (-mA) Bvgso Typ/Min (-V) Bvgdo Test- ed Igs (-mA) Bvgdo Typ/Min (-V) Vds Abso- lute Max (V) Chip Rth Typ (oC/W) Ideal Circuit FETs* (cont.) Model Gate Width/Length (um) NF @ (dB) NF @
4 GHz
(dB) Ga @ N.F @ (dB) Ga @ N.F @ (dB) P-1dB @ (dBm) Low Noise GaAs FETs * Consult Factory for Available Packaging: 70 / 73 / 71 / 89 / Q3 NOTE: Consult Factory For Binning Ranges MwT Standard GaAs FETs / PHEMTs DC Properties (RF Properties Listed on the previous page)
Over 29 Years of Technical Expertise and Innovation8 Wireless Amplifiers Wireless Amplifiers Model Case Code (-XX) Sealed SMT, Flange Freq Range (MHz) Linear Gain Typ/Min (dB) Gain Flatness Typ/Max (±dB) VSWR Input Typ/Max (dB) VSWR Output Typ/Max (dB) Noise Figure Typ/Max (dB) Pout @ -1 dB Typ/Min (dBm) IP3 Typ/Min (dBm) DC Voltage Applied (V) DC Current Typ (mA) "ULA 808-XX "ULA 818-XX High Linearity MPS
- Miniature, Low Cost, SMT , Flange, & Leadless Package Options
- Miniature, High Reliability, Hermetic SMT Options
- Low Noise, High Linearity, and Broadband Options
- Suitable for High Dynamic Range LNA
Applications
- Suitable for High Linear Driver Amp Gain Stages
- Low VSWR for Improved Cascade Performance Wireless Amplifiers (MPS, ULA and WPS WiMax)
- Single Voltage Supply and Low Current Operation
- Most Parts are Eutectic Assembly for High Reliability
- Standard and Custom Amplifier Specifications
- Hi-Rel and Space-Rel Screening Available (class H and K)
- GaAs MESFET and GaN PHEMT Devices MPS, ULA, WPS, and MGA * Hermetic Version Available (96 package)
Over 29 Years of Technical Expertise and Innovation 9 Wireless Amplifiers Wireless Amplifiers Model Case Code (-XX) Sealed SMT, Flange Case Code (-XX) Her- metic SMT Freq Range (MHz) Linear Gain Typ/Min (dB) Gain Flatness Typ/Ma (±dB) VSWR Input Typ/Min VSWR Output Typ/Min Noise Figure Typ/Min (dB) Pout @ -1 dB Typ/Min (dBm) PAE Typ (%) IP3 Typ/Min (dBm) DC Volt- age Ap- plied (V) DC Current Typ/Max (mA) General Purpose Hybrid Amplifiers in Surface Mount Packages Model Case Code Sealed Freq Range (MHz) Linear Gain Typ/Min (dB) Gain Flatness Typ/Ma (±dB) VSWR Input Typ VSWR Output Typ P1dB Typ (dBm) Pout @ 2.0% EVM Typ (dBm) IP3 Typ/Min (dBm) DC Voltage (V) DC Current Typ/Max (mA) WiMAX Hybrid Amplifiers in Surface Mount Packages WiMAX Linear GaN Amplifiers Model Pkg/ Chip Freq (GHz) Linear Gain Typ/Min (dB) Gain Flatness Typ/MAX (±dB) Input RL Typ (dB) Output RL Typ (dB) Pout @ -3 dB Typ/Min (dBm) Pout @ 2.5% EVM Typ (dBm) Vdd (V) DC Current (mA) MGA-242740-02 02 2.4-2.7 14/12 1.0/1.5 8 8 40 33 28 50-400 MGA-333840-02 02 3.3-3.8 15/12 1.0/1.5 8 8 40 33 28 100-400 MGA-495940-02 02 4.9-5.9 12 / 10 1.0/1.5 8 8 40 33 28 100-400 MGA-444940-02 02 4.4-4.9 12 / 10 1.0/1.5 8 10 40 33 28 100-400 MGA-445343-99 99 4.4-5.3 14/12 1.0/1.5 7 4 43 35 28 150-300 MPS, ULA, and MGA (1) Pout @ 2.5% EVM (2) Pout @ -1dB * NF - See Data Sheet
Over 29 Years of Technical Expertise and Innovation10 Connectorized Amplifiers Standard, Military, and Hi-Rel Connectorized Amplifiers Model Number Freq Range (GHz) Linear Gain Min/Typ (dB) Gain Flatness Max (±dB) Noise Figure Max/Typ (dB) Pout -1 dB Min/Typ (dBm) Current @12 V MAX * (mA) Case Code AW052202N 0.5-2 30/33 1.4 2.5/2.2 15/17 300 SL-2 AW052203 0.5-2 23/26 1.0 3.0/2.5 17/19 260 SL-2 AW054201N 0.5-4 19/26 1.0 2.5/2.2 15/17 220 SL-2 AW054203 0.5-4 21/24 1.0 4.5/4.0 16/18 260 SL-2 AW12201N 1-2 28/31 1.1 2.5/2.2 18/20 225 SL-2 AW12203 1-2 27/30 1.1 3.5/3.0 27/28 555 SL-2 AW26201N 2-6 21/23 1.0 2.5/2.2 13/15 155 SL-2 AW26204 2-6 19/21 1.0 4.5/4.0 23/24 335 SL-2 AW28201N 2-8 29/32 1.5 3.0/2.5 13/15 175 SL-2 AW28302 2-8 31/33 1.5 5.5/5.0 23/24 615 SL-3 AW612301N 6-12 30/32 1.0 3.5/3.0 16/17 240 SH-3 AW612304 6-12 22/23 1.0 6.5/6.0 27/28 750 SH-4 AW1218301N 12-18 24/26 0.8 3.5/3.0 14/15 230 SH-3 AW1218504 12-18 29/31 1.3 7.5/7.0 27/28 1200 SH-6 AW818301N 8-18 24/26 1.0 3.5/3.0 14/15 230 SH-3 AW818504 8-18 29/32 1.5 7.5/7.0 27/28 1300 SH-6 AW618301N 6-18 24/26 1.3 3.5/3.0 14/15 230 SH-3 AW618302 6-18 19/21 1.3 6.0/5.5 20/21 350 SH-3 AW618404 6-18 20/22 1.5 7.5/7.0 27/28 1200 SH-5 AW218201N 2-18 25/28 1.8 5.0/4.5 6/7 135 SH-2 AW218301N 2-18 24/26 2.0 6.5/6.0 15/16 365 SH-3 AW218301 2-18 20/22 2.0 6.0/5.5 20/21 500 SH-3 Model Number Freq Range GHz Linear Gain MIN/TYP (dB) Gain Flatness MAX (±dB) Noise Figure MAX/TYP (dB) Gain vs. Temp MAX (±dB) Current @12 V MAX * (mA) Case Code AT26301 2-6 21/23 1.0 6.0/5.5 0.8 300 SL-3 AT26401 2-6 36/40 1.5 5.5/5.0 1.0 470 SL-4 AT618401 6-18 22/24 1.0 7.5/7.0 0.8 380 SH-4 AT618501 6-18 31/33 1.3 7.0/6.5 0.8 500 SH-5 Model Number Freq Range (GHz) Pin Dynamic MIN/MAX (dBm) Noise Power MAX (dBm) Pout-sat MIN/MAX (dBm) Pout MAX Flatness (±dB) Current @12 V MAX * (mA) Case Code AL26501 2-6 -50/10 7.0 +15/+20 1.0 500 SL-5 AL618801 6-18 -50/10 10.0 +15/+20 2.0 800 LH-44 Wide-Band Amplifiers Temperature Compensation Amplifiers Limiting Amplifiers Contact factory for application assistance on custom and standard amplifiers. Hi-Rel and Space-Rel screening are available. * Built in voltage regulator.
Over 29 Years of Technical Expertise and Innovation 11 Connectorized Amplifiers Standard, Military, and Hi-Rel Connectorized Amplifiers Model Number Freq Range GHz Linear Gain MIN (dB) Gain Flatness MAX (±dB) Noise Figure MAX/TYP (dB) Pout-1dB MIN/TYP (dBm) Current @12 V MAX * (mA) Case Code AN12201N 1.2-1.8 28/31 0.5 -/1.7 15/17 180 CL-1 AN23201N 2.2-2.9 28/31 0.5 -/1.7 15/17 180 CL-1 AN45201N 4.4-5.0 25/27 0.5 -/1.7 15/17 180 CL-1 AN78201N 7.2-7.8 23/25 0.5 -/1.8 14/16 150 CH-1 AN910201N 9.0-10.0 21/23 0.5 -/1.8 14/16 150 CH-1 AN1415301N 14.5-15.3 24/27 0.5 -/2.1 13/15 200 CH-3 AN1718401N 17.7-18.7 29/32 1.0 -/2.8 12/14 250 CH-3 Model Number Freq Range (GHz) Linear Gain MIN (dB) Gain Flatness MAX ±dB VSWR MAX In/Out Pout-1dB MIN/TYP (dBm) Current @12 V MAX * (mA) Case Code Model Number Freq Range (GHz) Linear Gain MIN (dB) Gain Flatness MAX (±dB) IMD3 (dBc) @ Po (dBm/Tone) Pout-1dB MIN/TYP (dBM) Current @12 V MAX * (mA) Case Code AP1819701 18.1-18.6 30 0.5 -50@+15 27 2300 PH-01 AP1819801 18.1-18.6 35 0.5 -54@+15 29 2700 PH-01 Low Noise Amplifiers Medium Power Amplifiers Telecom Power Amplifiers Contact factory for application assistance on custom and standard amplifiers. Hi-Rel and Space-Rel screening are available. * Built in voltage regulator.
Over 29 Years of Technical Expertise and Innovation12 Hybrid Microwave Modules Hybrid Microwave Modules Model Freq Range (GHz) Linear Gain Typ/Min (dB) Gain Flatness Typ/Max (±dB) VSWR: 1 In & Out Typ/Max Reverse Isolation Typ (dB) Noise Figure Typ (dB) Pout @ -1 dB Typ/Min (dBm) IP3 Typ Current @ +8 V Typ/Max (mA) Case Code Carrier Size (mil x mil) Standard Gain Block Modules Note: Typical 2nd Harmonics @ P-I -21.0 dBc Typ MwT Standard and Custom Hybrid Modules
Over 29 Years of Technical Expertise and Innovation 13 Hybrid Microwave Modules Model Freq Range (GHz) Insertion Loss Typ/Max (dB) Loss Flatness ±Max (dB) Attend. Typ/Min (dB) Current @ +8 V Max (mA) Case Code Carrier Size (mil x mil) Temperature Compensation Modules Hybrid Microwave Modules Model Freq Range (GHz) Insertion Loss Typ/Max (dB) Ripple Rej @ 120 Hz Min (dB) Pw Diss Per VR Max (Watts) Regulated Voltage Min/Max (V) Supply Voltage Typ/Min (V) Total Current Max (mA) Case Code Carrier Size (mil x mil) Voltage Regulator Modules MwT Standard Voltage Regulator Modules (Each Module Contains Dual Adjustable Voltage Regulators) MwT Standard Temperature Compensation Modules
Over 29 Years of Technical Expertise and Innovation14 Outline Drawings Outline Drawings Q4/L4 Q10 0.008 [0,2] 0.026 [0,7] Pin #1 0.158 [4,0] 0.04 [1,0] TOP VIEW SIDE VIEW BOTTOM VIEW 0.02 [0,5] Pin #1 0.197 [5,0] 0.049 [1,3] 10.000 7.108 10.000 1.500 Dot marks Pin #1 WPS43734Q10 XXX YYRR CENTER LINE0.419 RF OUT RF IN 0.888 0.8881.750 2.690 3.553 4.819 Psen Vdd2 GND Vdd1 Vpc Vneg Bottom View Side ViewTop View Notes: Units: in/mm Ground Pad is 3.65 x 3.65 mm Notes: Units: in/mm Ground Pad is 2.0 x 2.0 mm Surface Finish: SN Plate Tolerances are ±0.005 Pin Assignment Pin # Name
1 GND
2 RF In
3 GND
4 Vneg
5 Vpc
6 Vdd1
7 GND
8 Vdd2
9 Psen
10 GND
12 GND
TOP VIEW SIDE VIEW BOTTOM VIEW Dimensions are in mm Tolerance is +/- 0.2 mm 0.158 [4,0] (Dimensions in mm)
Over 29 Years of Technical Expertise and Innovation 15 Outline Drawings Outline Drawings Package 02 Package 05 Package 10 Package 70 Package 71 INPUT SIDE DOT 0.430 0.270 0.390
0.15 MAX
- 02 XXXXXX 0.050 TYP 2 PLCSG AP 0.005 TYP
0.030 TYP
0.032 TYP 2 PLCS
0.20 MIN ALL LEADS
0.07 SQ.
0.040 TYP
0.020 TYP
0.050 MAX
0.098
0.063 THROUGH
0.240 +/- 0.002 D OR OUTPUT G OR INPUT
0.024 TYP
0.335 0.20 MIN0 .20 MIN 0.090 MAX 0.098 SQ 0.004 + 0.002 - 0.001 TYP 0.025 S OR GND 0.030 Notes: 1. Plated with 0.002” of Cu and 150m” of Ni. 2. Backside Gold Finish 4-10u” Au 0.500 +/- 0.005 0.450 +/- 0.005
0.15 THK 96% ALUMINA
0.007 (TYP) 0.015 0.015 0.031 PIN 1 0.050 0.024 10 9 0.007 (TYP) 0.394 (Dimensions in mm and inches — 1mm = 0.0394”)
Over 29 Years of Technical Expertise and Innovation16 Outline Drawings Outline Drawings Package 73 Package 81 Package 82 Package 84 Package 85 Package 87
0.100 MIN ALL LEADS
0.070 OR G 0.070 D
0.080 MAX
0.004 + 0.002 - 0.001 TYP PIN DESCRIPTION PER SPECIFICATION SHEET
0.010 MAX TYP
0.270 0.250 LEAD 1 LEAD 5
0.050 TYP
0.008 TYP
0.020
0.250 REF
0.270
0.200 TYP
0.250 0.430
0.145 MAX
0.028 PIN DESCRIPTION PER SPECIFICATION SHEET
0.005 MAX TYP
0.160
0.035 TYP
0.200 0.180 LEAD 4 LEAD 1
0.150 TYP
0.140
0.290 LEAD 8
0.110 MAX
0.020
140 REF
0.028 PIN DESCRIPTION PER SPECIFICATION SHEET
0.180 MAX SQ
0.015 TYP
150 TYP
0.210
0.400 MAX
0.070 MAX
0.030 GND 0.005 0.65 +/- 0.03 0.250 SQ
0.060 TYP
0.125 0.375 0.470
0.130 THROUGH
0.004+/- 0.001 TYP 0.085 0.060
0.195 MAX
0.098 0.240 +/- 0.002 D OR OUTPUT G OR INPUT 0.335 0.20 MIN0 .20 MIN 0.090 MAX 0.098 SQ 0.004 + 0.002 - 0.001 TYP 0.025 S OR GND 0.030 (Dimensions in mm and inches — 1mm = 0.0394”)
Over 29 Years of Technical Expertise and Innovation 17 Outline Drawings Outline Drawings Package 88 Package 89 (SOT-89) Package 96 Package 99 Notes: 1. Package body sizes exclude mold flash and gate burrs 2. Dimension L is measures in gage plane 3. Tolerance 0.10mm unless otherwise specified 4. Controlling dimension is millimeter. Converted inch dimensions are not necessarily exact 5. Followed from Jedec MS-012 6. Thermal slug dimension: 75mils x 100mils C L
2.540 TYP
1.905 TYP E H
D 7o (4X) A2 A B Dy e 0.150.00A1 5.80 0.40 3.80 4.80 0.19 0.33 y D H L e E B C 0.10 1.27 1.45 5.00 6.20 1.27 4.00 0.51 0.25 DIMENSIONS IN MILLIMETERS 1.45 MIN SYMBOLS A 1.50 NOM MAX 1.55 0.0060.000 0.228 0.016 0.150 0.189 0.007 0.013 0.004 0.050 0.057 0.197 0.244 0.050 0.157 0.020 0.010 DIMENSIONS IN INCHES 0.057 MIN 0.059 NOM MAX 0.061 (Dimensions in mm and inches — 1mm = 0.0394”)
Over 29 Years of Technical Expertise and Innovation18 Outline Drawings Outline Drawings Package C4 Package C5 Package H4 Package H6 Package L3 Package S7 SZ-1 SZ-2 Notes Units: IN/MM Ground Pad is 3.65 x 3.65 mm Surface Finish: SN Plate Tolerances are +/- 0.005 'RW0DUNV 3LQ 3,1 3,1 3,1,' 648$5( *URXQG 0.087 0.113 0.183 0.209 0.296 + 0.002 - 0.000 0.087 0.113 0.183 0.209 0.296 + 0.002 - 0.000 0.025 0.041 (0.055 MAX W/CAPS & BONDWIRES) DC DC 0.095 0.095 0.110 0.110 RF OUT RF IN 0.080 0.080 0.080 0.080 CLCL RF IN RF OUT 0.490 0.505 0.600 DC 0.490 0.505 DC 0.062 0.088 0.158 0.184 0.246 + 0.002 - 0.000 0.062 0.088 0.158 0.184 0.246 + 0.002 - 0.000 DC 0.095 0.110 RF OUT RF IN 110 0.080 0.080 0.080 CL CL 0.080 0.095 DC 0.025 0.041 (0.055 MAX W/CAPS & BONDWIRES) RF IN 0.390 0.405 DC 0.500 0.390 RF OUT 0.405 DC 0.500 Top View Side View Bottom View 0,197 [5,0] 0,197 [5,0] 0,049 [1,3] Pin #1 0,008 [0,2] 0,032 [0,8] 0,02 [0,5] 0,016 [0,4] (Dimensions in mm and inches — 1mm = 0.0394”)
Over 29 Years of Technical Expertise and Innovation 19 Outline Drawings Outline Drawings UL-1 UL-2 Slim-Pak* SH & SL Housing Series SMA Female, DC Filter Feedthru Though Hole Mounting T-Pak* TX & TC Housing Series SMA Female, DC Filter Terminal #4-40 Threaded Mounting Holes MOUNTING HOLES
0.100 DIA THROUGH
(4) PLCS 0.07 “F” 0.250 “B” MOUNTING SURFACE
1 RF INPUT GROUND J21 RF OUTPUT
“C” 0.10 +/- 0.03 0.30 “E”
0.38 TYP LABEL AREA
“A” “D” 0.16 +V DC EMI FILTER (REMOVEABLE) SMA FEMALE JACK (REMOVEABLE) (2) PLCS J11 RF INPUT 1.15 “C” J21 RF OUTPUT SMA FEMALE JACK (REMOVEABLE)
2 PLCS
“A ”
0.38 TYP
0.670 0.360 MOUNTING SURFACE
0.08 GROUND
0.14+V DC EMI FILTER
0.030 GOLD
“B” 0.750 200 0.250 MOUNTING HOLES #4-40 UNC-2B X 0.250 THREAD DEPTH 2 PLCS. CL 0.025 0.087 0.113 0.183 0.209 0.296 + 0.002 - 0.000 0.095 DC 0.080 0.080 0.110 RF IN RF OUT 0.490 0.505 0.041 (0.055 MAX W/CAPS & BOND WIRES) 0.600 0.087 0.113 0.183 0.209 0.296 + 0.002 - 0.000 DC 0.095 0.110 RF IN RF OUT 0.25 0.041 (0.55 MAX W/CAPS & BOND WIRES) 0.080 0.080 CL 0.490 0.505 0.600 0.062 0.088 0.158 0.184 0.246 + 0.002 - 0.000 0.062 0.088 0.158 0.184 0.246 + 0.002 - 0.000 Vout1 Vout2 0.110 0.95 Vin 0.080 CL RF IN RF OUT 0.390 0.405 Vout1 Vout1 0.500 L-2 Vout1 Vout2 0.110 0.095 RF OUTRF IN CL 0.080 0.390 Vin 0.405 Vout1 Vout2 0.500 0.025 0.041 (0.055 MAX W/CAPS & BOND WIRES) (Dimensions in mm and inches — 1mm = 0.0394”) * Consult Factory for Package Options and Outline Drawings
Over 29 Years of Technical Expertise and Innovation20 Contact Information MicroWave Technology Inc.
4268 Solar Way
Fremont, CA 94538 Phone: (510) 651-6700 Fax: (510) 952-4000 Website: www.mwtinc.com sales@mwtinc.com An IXYS Subsidiary MwT Headquarters in Fremont, California, USA