KS01-S ETC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 2
Technical content
KS01-S DUAL PURPOSE SURFACE / IMMERSION PROBE TYPE ‘K’
Description
This probe uses the straight handle for fine control. The probe is designed for the measurement of both surface temperatures and Immersion temperatures. NOTE: This probe only requires light pressure to give a true reading and is suitable for smooth, clean surfaces. If used on an uneven surface, there is a risk that the band will be weakened and deformed. Construction Ribbon band sensor with thermocouple sensor attached and draught shield : Stainless Steel 316 (Food Grade) Sealed with Silicon Rubber compound to ensure the probe is fully waterproof. 2M curly polyurethane cable with moulded connector. Sensor Features TOTAL ENCAPSULATION TECHNIQUE FOR MAXIMUM STRENGTH AND DURABILITY. This results in a solid handle as opposed to a hollow handle. This is particularly important as there is often damage to the handles caused by excess heat. With a hollow handle it is possible to puncture the outer plastic and damage the sensor irreparably. WATERPROOF HANDLE Due to the total encapsulation method used, all TME probe handles are completely waterproof. TOUGH POLYURETHANE CABLE Polyurethane cables are used in place of the standard PVC for the following reasons :- Greater retractability Enhanced memory of it’s curl Non–Toxic Greater mechanical strength for durability 12 X 0.2mm wires used internally for greater strength. PTFE inner insulation for strength and retractability. HIGH ACCURACY THERMOCOUPLE MATERIAL THROUGHOUT Type ‘K’ Thermocouple : Class I (±1.5°C ±0.25%) POLYPROPYLENE HANDLES Polypropylene is an extremely tough and durable material, commonly used for milk crates, it has good low temperature performance and a relatively high melt temperature. It performs exceptionally well under chemical attack. WIDE AMBIENT TEMPERATURE SPECIFICATION : -30 TO 50 °C TIME RESPONSE (96% of value on clean metal) : 3 Secs MEASUREMENT RANGE : -50 TO 250 °C (higher for non-continuous measurement)
57-0004-04 V2.1 2 Cross-reference for compatible instruments Suitable instruments for use with this probe TME PART No DESCRIPTION APPLICATION MM2000 SINGLE INPUT INSTRUMENT HIGH ACCURACY TEMPERATURE MEASUREMENT MM2008 LEGIONELLA THERMOMETER W/ TIMER LEGIONELLA TEMPERATURE MEASUREMENT MM2010 MAX / MIN HOLD INSTRUMENT HIGH ACCURACY INSTRUMENT WITH MAX, MIN AND HOLD FEATURES MM2020 DIFFERENTIAL INSTRUMENT DUAL INPUT INSTRUMENT FOR DIFFERENTIAL MEASUREMENTS MM2030 THERMOCOUPLE SIMULATOR HIGH ACCURACY SIMULATOR WITH MEASUREMENT FACILITY MM7000-2D BARCODE SCANNING THERMOMETER HANDHELD INSTRUMENT W/ BARCODE SCANNING FACILITY MM7005-2D BARCODE SCANNING THERMOMETER W/ USB HANDHELD INSTRUMENT W/ BARCODE SCANNING FACILITY & USB MM7100-2D NEW GEN BARCODE SCANNING THERMOMETER HANDHELD INSTRUMENT W/ BARCODE SCANNING FACILITY MM7105-2D NEW GEN BARCODE SCANNING THERMOMETER W/ USB HANDHELD INSTRUMENT W/ BARCODE SCANNING FACILITY & USB