DATASHEET SEARCH SITE
Document overview
- PDF pages: 2
Technical content
Page 1

Through-hole resistors
General Type
Normal & Miniature Style [ MFR Series ]

FEATURES
Power Rating
Resistance Tolerance
T.C.R.
DERATING CURVE
1/6W, 1/4W, 1/2W, 1W, 2W, 3W
±0.5%, ±1%, ±5%
±15ppm/°C, ±25ppm/°C, ±50ppm/°C, ±100ppm/°C
For resistors operated in ambient temperatures above 70°C, power rating must be derated
INTRODUCTION
in accordance with the curve below.
The MFR Series Metal Film Resistors are
70
155 °C
Rated Load (%)

manufactured using a vacuum sputtering system to deposit multiple layers of mixed metal alloys and passivative materials onto a carefully treated high grade ceramic substrate. After a helical groove has been cut in the resistive layer, tinned connecting leads of electrolytic copper
Ambient Temperature (°C)
are welded to the end-caps. The resistors are coated with layers of blue color lacquer.
DIMENSIONS
Unit: mm
STYLE
DIMENSION
Normal
Miniature
L
øD
H
ød
MFR-12
MFR25S
3.4±0.3
1.9±0.2
28±2.0
0.45±0.05

ød MFR-25
MFR50S
6.3±0.5
2.4±0.2
28±2.0
0.55±0.05
MFR-50
MFR1WS
9.0±0.5
3.3±0.3
26±2.0
0.55±0.05
MFR100
MFR2WS
11.5±1.0
4.5±0.5
35±2.0
0.8±0.05
MFR200
MFR3WS
15.5±1.0
5.0±0.5
33±2.0
0.8±0.05
Page 2
5

ELECTRICAL CHARACTERISTICS
STYLE
MFR-12 MFR25S MFR-25 MFR50S
MFR-50 MFR1WS MFR100 MFR2WS MFR200 MFR3WS
Power Rating at 70°C
1/6W 1/4W
1/2W
1W
2W
3W
Maximum Working Voltage
200V
250V 300V 350V 400V 500V
Maximum Overload Voltage
400V
500V 600V 700V 800V 1,000V
Voltage Proof on Insulation
300V 400V 500V
700V 1,000V
Resistance Range
1Ω - 10MΩ & 0Ω for E24 & E96 series value
Operating Temp. Range
-55°C to +155°C
Temperature Coefficient
±15ppm/°C, ±25ppm/°C, ±50ppm/°C, ±100ppm/°C
Note: Special value is available on request
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST
TEST METHOD
APPRAISE
Short Time Overload
IEC 60115-1 4.13 2.5 times RCWV for 5 Sec.
±0.25%+0.05Ω
in V-block for 60 Sec., test voltage by type
Voltage Proof on Insulation
IEC 60115-1 4.7
Temperature Coefficient
IEC 60115-1 4.8
-55°C to +155°C
Insulation Resistance
IEC 60115-1 4.6
in V-block for 60 Sec.
Solderability
IEC 60115-1 4.17 235±5°C for 3±0.5 Sec.
Solvent Resistance of Marking
IEC 60115-1 4.30 IPA for 5±0.5 Min. with ultrasonic
By type
By type
10,000MΩ
95% Min. coverage
No deterioration of coatings and markings
IEC 60115-1 4.16 Direct load for 10 Sec. in the direction of the terminal leads
Robustness of Terminations
≥2.5kg (24.5N)
IEC 60115-1 4.39 4 times RCWV 10,000 cycles (1 Sec. on, 25 Sec. off)
Periodic-pulse Overload
±1.0%+0.05Ω
IEC 60115-1 4.24 40±2°C, 90-95% RH for 56 days, loaded with 0.1 times RCWV
Damp Heat Steady State
±1.5%+0.05Ω
IEC 60115-1 4.25 70±2°C at RCWV for 1,000 Hr. (1.5 Hr. on, 0.5 Hr. off)
Endurance at 70°C
±1.5%+0.05Ω
-55°C Room Temp. +155°C Room Temp. (5 cycles)
Temperature Cycling
IEC 60115-1 4.19
±0.75%+0.05Ω
IEC 60115-1 4.18 260±3°C for 10±1 Sec., immersed to a point 3±0.5mm from the body
Resistance to Soldering Heat
±0.25%+0.05Ω
Note: RCWV(Rated Continuous Working Voltage) = Power Rating x Resistance Value or Max. working voltage listed above, whichever less.
Revision: 201304