MF1050 EUROQUARTZ
Document overview
- PDF pages: 1
Technical content
Page 1
MF CRYSTALS
6mm x 3.5mm SMD
DESCRIPTION
MF crystals are ultra-miniature surface-mount mount crystals. Produced with ceramic substrate and hermetically-sealed metal lid the compact size and low mass make this an ideal crystal for high-density applications.
FEATURES
- Ultra miniature size: 6.0mm x 3.5mm x 1.0mm height
- Gold-plated ceramic base with metal seam-welded lid
- Extremely low ageing
- High shock and vibration resistance
- Ideal for PDAs, GPS, PCMCIA and hand-held equipment
GENERAL SPECIFICATION
Frequency Range AT-Cut Fundamental:
12MHz to 50.0MHz
AT-Cut 3rd Overtone:
40.0MHz to 100.0MHz
Calibration Tolerance at 25ºC\*: ±10ppm, ±20ppm or ±30ppm Frequency stability over temp\*\*. Range -20° to +70°C:
±5ppm, ±10ppm or ±30ppm
Range -30° to +85°C:
±10ppm
Storage Temperature:
-40°~+85°C
Shunt Capacitance (C0):
2pF to4pF typical, 5pF maximum
Load Capacitance (CL):
Series or 10pF to 32pF (Customer specified CL)
Ageing:
<±3ppm per year at +25°C
Drive level:
100µW max
Reflow Soldering:
10s maximum at 260°C two times or 180s at 230°C, once.
Holder:
Ceramic base, metal lid, hermetic seal
Packaging:
16mm EIA tape and reel 3000 pieces per reel
Notes: \* Calibration Tolerance of ±5ppm at 25°C is available \*\* Tighter tolerance, and lower ESR parameters are available, check with Euroquartz technical sales.
OSCILLATION MODE & ESR

SURFACE-MOUNT CRYSTALS
OUTLINES AND DIMENSIONS

PART NUMBER GENERATION
MF crystal part numbers are derived as follows:
Example: 16.000MHz MF/ 10/50/10/30pF/ATF

Frequency Package - MF
(in ±ppm)
(in ±ppm)
(lower figure of
Circuit Condition
Mode
STOCKHOLDING AND CUSTOM PARTS
Certain frequencies and specification of MF crystals are stocked by Euroquartz. Custom frequencies and specifications are readily manufactured to order on short lead times. Contact Euroquartz sales office for details.