MCSO6F_17 MICROCRYSTAL
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MCSO6F family package 3.2×2.5 mm Low Jitter From 10 kHz up to 155 MHz All dimensions in mm typical ELECTRICAL CHARACTERISTICS AT +25°C Frequency stability Over temperature range (see ordering info) Including: adjustment at +25°C long term aging 10 years over supply voltage ±5% over load min to max ΔF/F ≤ ± 100 ppm Frequency stability version T Over temperature range (see ordering info) Including: adjustment at +25°C long term aging 1 year over supply voltage ±5% over load min to max ΔF/F ≤ ± 50 ppm Supply voltage ± 5% 1)* Version 1.2V available on request Vdd 1.8 / 2.5 / 3.3 V Input current Idd see table 1 Output signal HC-MOS compatible Symmetry at Vdd/2 40 / 60 % Rise & fall time For F=32.768 kHz rise & fall time ≤ 150ns (load 15pf 20% to 80%) ≤7 ns Start-up time t <5 ms Load min / max 3/47 pF Jitter ≤ 20MHz one sigma < 2rms ps Jitter > 20MHz one sigma < 10rms ps 100% Leadfree, RoHScompliant: DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. APPLICATIONS: - Avionics - Airbone equipments - Remote control - Security application - Radio Transceiver - Microprocessor clocks The MCSO6's are supplied on trays (208 pcs / tray) For pick-and-place equipment, the parts are available in 12mm tapes with 250 parts min 1000 parts min SMT Clock oscillator in ceramic package Fundamental quartz mode frequency High shock and vibration resistance Wide temperature range Low aging Ultra low internal MSL Very fast start-up Excellent solderability Swiss made quality Customer specification on request Package: Bottom view Recommended Solder Pad: * 1) C = 47nF ceramic must be connected between GND & Vdd 1,3 0,9 1,31,3 1,1 4 3 1 2 3,6 max 1,1 2,2max. 1,2 2,8 pin 1 E/D pin 2 GND pin 3 Fout pin 4 Vdd
Version 14/11.2017 Micro Crystal AG Tel. +41 32 655 82 82 Mühlestrasse 14 Fax +41 32 655 82 83 CH-2540 Grenchen sales@microcrystal.com Switzerland www.microcrystal.com ENVIRONMENTAL CHARACTERISTICS: Storage temp. range -65 to +125°C Vibration resistance (survival) 10 to 2000Hz / 50g Shocks resistance (survival) 5000g / 0.3ms / ½ sine TERMINATIONS AND PROCESSING: Reflow soldering +260°C / 10s max Package Ceramic 3.2 x 2.5 x 1.2mm Lids Ceramic Terminations option T3 on request with tinned Ag/Cu/Sn Reaction time ˂ 1μs E/D option 1 on request Pin 1 open → Pin 3 Clock H → Clock L → Low PRODUCT DESCRIPTION AND ORDERING INFORMATION: All specifications subject to change without notice. Frequency «MHz» 4 8 10 12 16 20 24 40 50 60 Other frequencies from 10 kHz up to 155 MHz on request STANDARD FREQUENCIES: - No power E/D function (pin 1) before Vdd is setting on - E/D option on request (very low consumption in disable mode). Z = VDD 1.8V W = Vdd 2.5V V = Vdd 3.3V T = ±50ppm blank = ±100ppm A = 0 to +70°C B = -40 to +85°C C = -55 to +125°C X = custom Frequency option 1 E/D enable / disable option 2 blank Au plated T3 = tinned customer spec N° MCSO6F V T - C 48MHz E/D T3 XXX Frequency F=32 kHz F=< 10MHz ≤ 20MHz >20 to 155MHz W=Vdd = 2.5V < 300μA < 2mA < 3mA < 25mA V=Vdd = 3.3V < 1mA < 4mA < 5mA < 30mA TABLE 1: Idd (Without load) A unique part number will be generated for each product specification 20xxxx-EA00 xxx pcs (in ESD plastic tray) 200xxx-ML00 xxx pcs (in tape & reel, any quantity)