MCSO6E_17 MICROCRYSTAL
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MCSO6E family package 3.2×2.5mm T range up to 210°C All dimensions in mm typical ELECTRICAL CHARACTERISTICS AT +25°C Frequency stability Over temperature range C = -55 to +125°C (see ordering info) Including 2)* ΔF/F ≤ ± 100 ppm Frequency stability Over temperature range E = -55 to +150°C (see ordering info) Including 2)* ΔF/F ≤ ± 150 ppm Frequency stability Over temperature range D = -55 to +175°C (see ordering info) Including 2)* ΔF/F ≤ ± 300 ppm Frequency stability Over temperature range G = -55 to +210°C (see ordering info) Including 2)* ΔF/F ≤ ± 400 ppm Supply voltage ± 5% 1)* Vdd 2.5 / 3.3 / 5 V Input current Idd see table 1 Output signal HC-MOS compatible Symmetry at Vdd/2 40 / 60 % Rise & fall time For F=32.768 kHz rise & fall time ≤ 150ns (load 15pf 20% to 80%) ≤7 ns Start-up time t <5 ms Load min / max 3/47 pF 100% Leadfree, RoHScompliant: DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. APPLICATIONS: - Downhole and Well drilling equipments - Avionics - Airbone equipments - Geothermal equipments The MCSO6's are supplied on trays (208 pcs / tray) For pick-and-place equipment, the parts are available in 12mm tapes with 250 parts min 1000 parts min SMT Clock oscillator in ceramic package Fundamental quartz mode frequency High shock and vibration resistance Wide temperature range Low aging Ultra low internal MSL Very fast start-up Excellent solderability Swiss made quality Customer specification on request Package: Bottom side Recommended Solder Pad: All dimensions in mm typical * 1) C = 47nF ceramic must be connected between GND & Vdd Operable over 2.3 to 5.5V * 2) adjustment at +25°C, long term aging 1000h at Tmax ordered over supply voltage ±5% and over load min to max Frequency stability included 1000h at Tmax 1,3 0,9 1,31,3 1,1 4 3 1 2 3,6 max 1,1 2,2max. 1,2 2,8 pin 1 E/D pin 2 GND pin 3 Fout pin 4 Vdd
Version 13/05.2017 Micro Crystal AG Tel. +41 32 655 82 82 Mühlestrasse 14 Fax +41 32 655 82 83 CH-2540 Grenchen sales@microcrystal.com Switzerland www.microcrystal.com ENVIRONMENTAL CHARACTERISTICS: Storage temp. range -65 to +125°C Vibration resistance (survival) 10 to 2000Hz / 80g Shocks resistance (survival) 10000g / 0.3ms / ½ sine TERMINATIONS AND PROCESSING: Reflow soldering +260°C / 10s max Package Ceramic 3.2 x 2.5 x 1.2mm Lids Ceramic (Kovar on version G) Terminations option T3 on request (not available on G temperature range) with tinned Ag/Cu/Sn E/D option 1 on request Reaction time ˂ 1μs Pin 1 open → Pin 3 Clock H → Clock L → Low PRODUCT DESCRIPTION AND ORDERING INFORMATION: All specifications subject to change without notice. Frequency «MHz» 4 8 10 12 16 20 24 40 50 60 Other frequencies from 10 kHz MHz to 60 MHz on request STANDARD FREQUENCIES: - No power E/D function (pin 1) before Vdd is setting on - E/D option not available for F ˂ 500 kHz - E/D option on request (very low consumption in disable mode). W = Vdd 2.5V V = Vdd 3.3V blank = Vdd 5V C = -55 to 125°C E = -55 to 150°C D = -55 to 175°C G = -55 to 210°C X = custom Frequency option 1 E/D enable / disable option 2 blank Au plated T3 = tinned customer spec N° MCSO6E V - D 20MHz E/D T3 XXX TAbLE 1: Idd (Without load) A unique part number will be generated for each product specification 20xxxx-EA00 xxx pcs (in ESD plastic tray) 200xxx-ML00 xxx pcs (in tape & reel, any quantity) Frequency F= 32 kHz F=< 10MHz ≤ 20MHz > 20MHz W =Vdd = 2.5V < 300μA < 2mA < 3mA < 15mA V =Vdd = 3.3V < 1mA < 4mA < 5mA < 20mA blank =Vdd = 5V < 2mA < 6mA < 7mA < 30mA