MCSO2E MICROCRYSTAL
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MCSO2E family package 5×3.2 mm T range up to 210°C Recommended Solder Pad: All dimensions in mm typical ELECTRICAL CHARACTERISTICS AT +25°C Frequency stability Over temperature range C = -55 to +125°C (see ordering info) Including 2)* ΔF/F ≤ ± 100 ppm Frequency stability Over temperature range E = -55 to +150°C (see ordering info) Including 2)* ΔF/F ≤ ± 150 ppm Frequency stability Over temperature range D = -55 to +175°C (see ordering info) Including 2)* ΔF/F ≤ ± 300 ppm Frequency stability Over temperature range G = -55 to +210°C (see ordering info) Including 2)* ΔF/F ≤ ± 400 ppm Supply voltage ± 5% 1)* Vdd 2.5 / 3.3 / 5 V Input current Idd see table 1 Output signal HC-MOS compatible Symmetry at Vdd/2 40 / 60 % Rise & fall time ≤ 20MHz For F=32.768 kHz rise & fall time ≤ 150ns (load 15pf 20% to 80%) ≤7 ns Rise & fall time ≥ 20MHz for (load 15pf 10% to 90%) ≤3 ns Start-up time t <5 ms Load min / max 3/47 pF 100% Leadfree, RoHScompliant: DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. APPLICATIONS: - Downhole and Well drilling equipments - Avionics - Airbone equipments - Geothermal equipments - Fire fighter equipments The MCSO2's are supplied on trays (128 pcs / tray) For pick-and-place equipment, the parts are available in 12mm tapes with 250 parts min 1000 parts min SMT Clock oscillator in ceramic package Fundamental quartz mode frequency High shock and vibration resistance Wide temperature range Low aging Ultra low MSL Very fast start-up Excellent solderability Swiss made quality Customer specification on request 5.00 2.35 3.201.6 1.6 1 2 1.5 2.7 1.5 11.61 4 3 1 2 pin 1 E/D pin 2 GND pin 3 Fout pin 4 Vdd Package: Bottom view * 1) C = 47nF ceramic must be connected between GND & Vdd Operable over 2.3 to 5.5V * 2) adjustment at +25°C, long term aging 1000h at Tmax ordered over supply voltage ±5% and over load min to max Frequency stability included 1000h at Tmax
Version 11/08.2015 Micro Crystal AG Tel. +41 32 655 82 82 Mühlestrasse 14 Fax +41 32 655 82 83 CH-2540 Grenchen sales@microcrystal.com Switzerland www.microcrystal.com ENVIRONMENTAL CHARACTERISTICS: Storage temp. range -65 to +125°C Vibration resistance 10 to 2000Hz / 40g Shocks resistance 10000g / 0.3ms / ½ sine TERMINATIONS AND PROCESSING: Reflow soldering 260°C / 10s max Package Ceramic 5 x 3.2 x 1.6mm Lids Ceramic Terminations option T3 on request (not available on G temperature range) with tinned Ag/Cu/Zn E/D option 1 on request Reaction time ˂ 1μs Pin 1 open → Pin 3 Clock H → Clock L → Low PRODUCT DESCRIPTION AND ORDERING INFORMATION: All specifications subject to change without notice. Frequency «MHz» 3.6864 4 8 10 12 12.8 14.7456 16 20 24 40 48 Other frequencies from 10 kHz up to 100MHz on request STANDARD FREQUENCIES: - No power E/D function (pin 1) before Vdd is setting on - E/D option not available for F ˂ 500 kHz - E/D option on request (very low consumption in disable mode). H ˃ 20MHz blank ≤ 20MHz W = Vdd 2.5V V = Vdd 3.3V blank = Vdd 5V C = -55 to 125°C E = -55 to 150°C D = -55 to 175°C G = -55 to 210°C X = custom Frequency option 1 E/D enable / disable option 2 blank Au plasted T3 = tinned customer spec N° MCSO2E H V - D 20MHz E/D T3 XXX TAbLE 1: Idd (Without load) Frequency Fz 32 kHz F=< 10MHz ≤ 20MHz >20 to 100MHz W =Vdd = 2.5V < 300μA < 2mA < 3mA < 15mA V =Vdd = 3.3V < 1mA < 4mA < 5mA < 20mA blank =Vdd = 5V < 2mA < 6mA < 7mA < 30mA A unique part number will be generated for each product specification 20xxxx-EA00 xxx pcs (in ESD plastic tray) 200xxx-ML00 xxx pcs (in tape & reel, any quantity)