MCSO1ELS_17 MICROCRYSTAL
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MCSO1ELS low consumption 32.768 kHz T range up to 200°C SC cut quartz Crystal Recommended Solder Pad: All dimensions in mm typical ELECTRICAL CHARACTERISTICS AT +25°C Frequency stability Over temperature range R = -10 to +150°C (see ordering info) Including 2)* ΔF/F ≤ ± 50 ppm Frequency stability Over temperature range S = -10 to +175°C (see ordering info) Including 2)* ΔF/F ≤ ± 100 ppm Frequency stability Over temperature range T = -10 to +200°C (see ordering info) Including 2)* 3)* ΔF/F ≤ ± 150 ppm Supply voltage ± 5% 1)* Vdd 2.5 / 3.3 / 5 V Input current Idd see table 1 Output signal HC-MOS compatible Symmetry at Vdd/2 40 / 60 % Rise & fall time (load 15pf 20% to 80%) 25 ns Start-up time t <5 ms Load min / max 3/27 pF 100% Leadfree, RoHScompliant: DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. APPLICATIONS: - Avionics - Airbone equipments - Fire fighter equipments The MCSO1's are supplied on trays (91 pcs / tray) For pick-and-place equipment, the parts are available in 16mm tapes with 250 parts min 1000 parts max SC cut quartz crystal SMT Clock oscillator in ceramic package Fundamental quartz mode frequency Ultra Low stability High shock and vibration resistance Wide temperature range Low aging Ultra low internal MSL Very fast start-up Excellent solderability Swiss made quality Customer specification on request 1 2 4 3 1 2 7,86 3,70 3,601,52 2,2 2,54 3,18 2,54 1,61,161,6 pin 1 E/D pin 2 GND pin 3 Fout pin 4 Vdd Package: Bottom view * 1) C = 47nF ceramic must be connected between GND & Vdd Operable over 2.3 to 5.5V * 2) adjustment at +25°C, long term aging 1000h at Tmax ordered over supply voltage ±5% and over load min to max * 3) Only available with Supply voltage 5V Frequency stability included 1000h at Tmax
Version 3.0/05.2017 Micro Crystal AG Tel. +41 32 655 82 82 Mühlestrasse 14 Fax +41 32 655 82 83 CH-2540 Grenchen sales@microcrystal.com Switzerland www.microcrystal.com ENVIRONMENTAL CHARACTERISTICS: Storage temp. range -65 to +125°C Vibration resistance (survival) 10 to 2000Hz / 80g Shocks resistance (survival) 10000g / 0.3ms / ½ sine TERMINATIONS AND PROCESSING: Reflow soldering +260°C / 10s max Package Ceramic 8 x 4 x 2.2mm Lids (standard) Kovar Lids (on request) Ceramic (Kovar on version T) Terminations option T3 on request (not available on T temperature range) with tinned Ag/Cu/Sn E/D option 1 on request Reaction time ˂ 5mS Pin 1 open → Pin 3 Clock H → Clock L → Low PRODUCT DESCRIPTION AND ORDERING INFORMATION: All specifications subject to change without notice. Frequency «kHz» 32.768 Other frequencies on request STANDARD FREQUENCIES: - No power E/D function (pin 1) before Vdd is setting on - Disable option (consumption ≤5μA). blank = Kovar lids C = Ceramic lids W = Vdd 2.5V V = Vdd 3.3V blank = Vdd 5V R = -10 to 150°C S = -10 to 175°C T = -10 to 200°C X = custom Frequency option 1 E/D enable / disable option 2 blank Au plated T3 = tinned customer spec N° MCSO1ELS C V - S 32kHz E/D T3 XXX TAbLE 1: Idd (With load 10pF) Frequency F=32 kHz W=Vdd = 2.5V < 100μA V=Vdd = 3.3V < 110μA blank=Vdd = 5V < 120μA A unique part number will be generated for each product specification: i.e: 20xxxx-EA00 xxx pcs (in ESD plastic tray) 200xxx-ML00 xxx pcs (in tape & reel, any quantity)