MCR

MCR ROHM

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

1/11 www.rohm.com ○c 2012 ROHM Co., Ltd. All rights reserved. 2012.03 - Rev. A Thick Film Chip Resistors MCR Series Features 1) Full line up from ultra small size (01005) to 2512 with jumper type. 2) High reliability metal glazed thick film. 3) ROHM resistors have obtained IS O9001/ISO/TS16949 certification. 4) "Automotive" product is AEC-Q200 compliant. Part No. Resistance Range Packing Specification Quantity / Reel(mm) Type CodeSize GENERAL PURPOSE Paper tape (2mm pitch) Paper tape (2mm pitch) Paper tape (4mm pitch) Embossed tape (1mm pitch) Embossed tape (4mm pitch) 0402 0603 1005 1608 2012 3216 3225 5025 6432 ∗Please contact us for status of AEC-Q200 on "General purpose" products. 01005 10 Ω to 3MΩ 1Ω to 10MΩ 1Ω to 10MΩ 1Ω to 10MΩ 1Ω to 10MΩ 1Ω to 10MΩ 1Ω to 3.3MΩ 1Ω to 560kΩ 1Ω to 100kΩ 0201 0402 0603 0805 1206 YRT RZP YZP 15,000 40,000 15,000 10,000 5,000 4,000 MRT ERT ERT ERT YZP MZP EZP EZP EZP

1210 JZH

(inch) AUTOMOTIVE ∗Corresponds to AEC−Q200 Part Number Description MCR (Micro chip resistors)

0 YTRCMR

Part No. Resistance code, 3 or 4 digits. 000 denotes jumper type. Ex.) 1Ω = 1R0 ( ±5% ) 100 ( ±5% ) 225 ( ±5% ) D,F J 4 digits 3 digits Resistance tolerance Resistance code 004 (0402 [01005]) 006 (0603 [0201]) 01 (1005 [0402]) 03 (1608 [0603]) 10 (2012 [0805]) 18 (3216 [1206]) 25 (3225 [1210]) 50 (5025 [2010]) 100 (6432 [2512]) D ( ±0.5% ) F ( ±1% ) FX ( ±1% ) ∗Only MCR03EZP J ( ±5% ) (Including jumper type) Size (mm [inch]) Resistance Tolerance Nominal Resistance J0 1 0 Type Code

2/11 www.rohm.com ○c 2012 ROHM Co., Ltd. All rights reserved. 2012.03 - Rev. A Data Sheet MCR series < General Purpose > Products List Limiting Element Voltage (V) Maximum Overload Voltage (V) Temperature Coefficient (ppm / °C) Resistance Tolerance (%) Operating Temperature Range (°C) Type Code Resistance Range SeriesPart No. Rated Power (70°C) (W) MCR004 YZP, RZP MCR006 YRT 0.031 15 Jumper type : Rmax = 50m Ω / Imax. = 0.5A Jumper type : Rmax = 50m Ω / Imax. = 0.5A Jumper type : Rmax = 50m Ω / Imax. = 1A Jumper type : Rmax = 50m Ω / Imax. = 1A Jumper type : Rmax = 50m Ω / Imax. = 2A Jumper type : Rmax = 50m Ω / Imax. = 2A Jumper type : Rmax = 50m Ω / Imax. = 2A Jumper type : Rmax = 50m Ω / Imax. = 3A Jumper type : Rmax = 50m Ω / Imax. = 4A ∗Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product before using or ordering it. ±300 J(±5%) J(±5%) F(±1%) 150 200 200 200 200 400 400 400 400 200 100 0.05 MRT ERT ERT ERT JZH JZH JZH MCR01 MCR03 MCR10 MCR18 MCR25 MCR50 MCR100 0.063 0.1 0.125 0.25 0.25 0.5 ±250 ±300 ±250 ±600 / −200 +500 / −250 ±250 ±250 ±200 1.0Ω to 9.1Ω 10Ω to 10MΩ 10Ω to 10MΩ 10Ω to 1MΩ F(±1%) D(±0.5%) J(±5%) F(±1%) D(±0.5%) J(±5%) F(±1%) J(±5%) F(±1%) J(±5%) J(±5%) J(±5%) F(±1%) F(±1%) F(±1%) J(±5%) F(±1%) 10Ω to 91Ω 100Ω to 3MΩ 10Ω to 91Ω 100Ω to 3MΩ E24 E24 E24 E24 −55 to +125 −55 to +155 −55 to +125 E24 E24 E24 E24 D(±0.5%) ±100 ±100 ±200 ±200 1.0Ω to 9.1Ω 10Ω to 976kΩ 10Ω to 1MΩ 1MΩ to 2.2MΩ 10Ω to 10MΩ E24 E24,E96 E24 E24,E96 E24 E24 E24,E96 E24,E96 E24 E24 E24,E96 E24,E96 E24 E24 E24,E96 E24,E96 E24 E24 E24 E24,E96 E24,E96 E24 E24 E24 E24,E96 E24 E24 E24 E24 E24,E96 E24 E24 500±350 ±500 ±200 ±100 ±400 ±200 ±100 ±200 1.0Ω to 9.1Ω 10Ω to 10MΩ 10Ω to 976kΩ 1MΩ to 2.2MΩ 1.0Ω to 9.1Ω 10Ω to 10MΩ 10Ω to 976kΩ 1MΩ to 2.2MΩ 1.0Ω to 2.0Ω 2.2Ω to 5.1Ω 5.6Ω to 3.3MΩ 10Ω to 1MΩ ±400 ±200 ±100 ±200 500±350 ±200 ±100 ±350 ±500 1.0Ω to 2.0Ω 10Ω to 330kΩ 10Ω to 180kΩ 360kΩ to 560kΩ 2.2Ω to 9.1Ω 1.0Ω to 2.0Ω 10Ω to 22Ω 10Ω to 82kΩ 24Ω to 100kΩ 2.2Ω to 9.1Ω 500±350 ±350 ±100 ±200 ±500 ±400 ±100 ±100 ±200 ±200 1.0Ω to 9.1Ω 10Ω to 976kΩ 10Ω to 1MΩ 1MΩ to 10MΩ 10Ω to 10MΩ

3/11 www.rohm.com ○c 2012 ROHM Co., Ltd. All rights reserved. 2012.03 - Rev. A Data Sheet MCR series < General Purpose > Chip Resistor Dimensions and Markings <Marking method> There are three or four digi ts used for the calculation number according to IEC code and “R”is used for the decimal point. Part No. Type Code (mm) (inch) L W t a b Marking existence (Unit : mm) 0.25 +0.05 −0.1 Marking method of jumper type Jumper type Marking existence No Yes MCR004 / 006 / 01 / 25 / 50 / 100 MCR03 / 10 / 18 Marking method of MCR03 The description of markings on the chip resistor are as shown below. ① Marking method (J class): The nominal resistance is expressed in by E-24series 3 digits. The first 2 digits apply to the resistance value and the last one indicates the number of zeros to follow. The R is used as a decimal point. E x a m p l e：100k= 104 ② Marking method (F/D class): ･For the resistance value contained in E96 series. The nominal resistance is expressed in 3 digits. The first 2 digits is symbol to the resistance value and the last one is symbol to multipliers. Example : 100k = 01d (01d 100×10 Example : 3.01k = 47b (47b301×10 = 3010= 3.01k) ･For the resistance value not contained in E96 series and contained in E-24 series. The marking is expressed by E-24 series in 3 digits and one short bar under the last marking letter. Example : 390 = 391 Land pattern Example B D A LandC Symbol for E96 Series nominal resistance value Symbol E96 Symbol E96 Symbol E96 Symbol E96 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 158 162 165 169 174 178 182 187 191 196 200 205 210 215 221 226 232 237 243 249 255 261 267 274 280 287 294 301 309 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 464 475 487 499 511 523 536 549 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 887 909 931 953 976 Symbol for multipliers Symbol A b C d E F X Y multipliers 10 0 101 102 103 104 105 10−1 10−2 b 103 L W t a Dimensions Part No. Type Code A MCR004 MCR006 MCR01 MCR03 MCR10 MCR18 MCR25 MCR50 MCR100 YZP,RZP 0.2 YRT MRT ERT ERT ERT JZH JZH JZH 0.3 0.5 0.5 1.2 2.2 2.2 3.8 5.1 B 0.4 0.84 1.3 1.3 2.6 4.0 4.0 6.0 8.1 C 0.16 0.3 0.5 0.5 1.15 1.5 2.3 2.3 3.0 D 0.1 0.27 0.4 0.4 0.7 0.9 0.9 1.1 1.5 (Unit : mm)

4/11 www.rohm.com ○c 2012 ROHM Co., Ltd. All rights reserved. 2012.03 - Rev. A Data Sheet MCR series < General Purpose > Derating Curve When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curves below. 100 −55 0 70 100 125 AMBIENT TEMPERATURE (°C) PERCENT RATED POWER (%) /boxsolid MCR004 / 006 / 100 Characteristics Test Items Test Conditions Resistor Type Guaranteed Value Jumper Type Resistance Variation of resistance with temperature Solderability Damp heat, steady state Endurance at 70°C Endurance Rapid change of temperature Bend strength of the end face plating Resistance to solvent Resistance to soldering heat Overload ± (2.0%+0.1Ω) Max. 50m Ω ± (1.0%+0.05Ω) ± (3.0%+0.1Ω) Max. 50mΩ Max. 100mΩ See P.1 See P.1 20°C No remarkable abnormality on the appearance. A new uniform coating of minimum of 95% of the surface being immersed and no soldering damage. Without mechanical damage such as breaks. Compliance Standard(s) : IEC60115−8 JISC 5201−8 Measurement : +20 / −55 / +20 / +125°C Soldering condition : 260±5°C Duration of immersion : 10±1s 40°C, 93%RH Test time : 1,000h to 1,048h ± (3.0%+0.1Ω) ± (3.0%+0.1Ω) ± (1.0%+0.05Ω) ± (1.0%+0.05Ω) ± (1.0%+0.05Ω) Max. 100mΩ Max. 100mΩ Max. 50mΩ Max. 50mΩ Max. 50mΩ 70°C Rated voltage (current) 1.5h : ON − 0.5h : OFF Test time : 1,000h to 1,048h 125°C (MCR004 / 006 / 25 / 50 / 100) 155°C (MCR01 / 03 / 10 / 18) Test time : 1,000h to 1,048h 23±5 °C, Immersion cleaning, 5±0.5min Solvent : 2−propanol Test temp. −55°C to +125°C 100cyc (MCR004 / 006) −55°C to +125°C 300cyc (MCR01) −55°C to +125°C 5cyc (MCR03 / 10 / 18 / 25 / 50 / 100) Rosin·Ethanol (25%WT) Soldering condition : 235±5°C Duration of immersion : 2.0±0.5s Rated voltage (current) ×2.5, 2s. Limiting element voltage ×2 : (See P.1) Technical data Parameter Unit MCR004 YZP / RZP MCR006 YRT MCR01 MRT MCR03 ERT MCR10 ERT MCR18 ERT MCR25 JZH MCR50 JZH MCR100 JZH MΩ− Fit mg/pc 0.0038 0.04 1000 1000 1000 1000 0.0185 0.150 0.0185 0.565 0.0185 2.03 0.0185 4.73 1000 0.0185 8.56 1000 0.0203 16.5 1000 0.0201 25.8 1000 0.0586 42.0 Insulation resistance Failure rate Weight /boxsolid MCR01 / 03 / 10 / 18 / 25 / 50 100 −55 0 70 100 155 AMBIENT TEMPERATURE (°C) PERCENT RATED POWER (%)

5/11 www.rohm.com ○c 2012 ROHM Co., Ltd. All rights reserved. 2012.03 - Rev. A Data Sheet MCR series < General Purpose > Tape Dimensions Paper Tape Embossed Tape <MCR004> E F W φD0 Base Embossed Top tape Components Pocket <MCR25 / 50 / 100> A0 P1 P0 P2 F W EφD0 P2 P1 E F W φD0 Base paper (Bottom tape) Components Cavity Top tape 0.7±0.1 1.2 ±0.1 1.0±0.1 1.8 ±0.1 1.55±0.1 2.3 ±0.1 1.9±0.2 3.5 ±0.2 (Unit : mm) WType CodePart No. F E A 0 B0 φ1.5 +0.1 φ1.5 +0.1 φ1.5 +0.1 φ1.5 +0.1 φ1.5 +0.1 φ1.5 +0.1 2.0±0.05 Max 0.5 2.0±0.05 Max 0.5 2.0±0.05 2.0±0.05 2.0±0.05 2.0±0.05 Max 1.1 Max 1.1 Max 1.1 Max 1.1 D0Type CodePart No. P 0 P1 P2 T2 MCR004 YZP 4.0±0.1 4.0±0.1 4.0±0.1 4.0±0.1 4.0±0.1 4.0±0.1 2.0±0.05 MCR006 YRT 2.0±0.05 MCR01 MRT 2.0±0.1 MCR03 ERT 4.0±0.1 MCR10 ERT 4.0±0.1 MCR18 ERT 4.0±0.1 3.0±0.1 3.5 ±0.1 3.4±0.2 5.6 ±0.2 3.5±0.2 6.7 ±0.2 (Unit : mm) WType CodePart No. F E A 0 B0 φ0.8±0.04 φ1.5 +0.1 φ1.5 +0.1 φ1.5 +0.1 1.0±0.02 0.2 ±0.02 2.0±0.05 Max 1.1 2.0±0.05 2.0±0.05 Max 1.1 Max 1.1 D0Type CodePart No. P 0 P1 P2 T2 MCR004 RZP 2.0±0.04 4.0±0.1 4.0±0.1 4.0±0.1 1.0±0.02 MCR25 JZH 4.0±0.1 MCR50 JZH 4.0±0.1 MCR100 JZH 4.0±0.1

6/11 www.rohm.com ○c 2012 ROHM Co., Ltd. All rights reserved. 2012.03 - Rev. A Data Sheet MCR series < General Purpose > Reel Dimensions AType CodePart No. B C D (Unit : mm) φ13±0.2φ178±1.0MCR004 RZP φ60±1.0 5 +1.0 −0.6 C AB D Label 0 2 0 4 0 6 0 8 0 2 0 4 0 6 0 8 C AB D Label ACCORDING TO EIAJ ET-7200B ACCORDING TO EIAJ RRM-048c AType CodePart No. B C D (Unit : mm) φ13±0.2φ180 0 −1.5 φ60 +1.0 MCR004 YZP MCR006 YRT MCR01 MRT MCR03 ERT MCR10 ERT MCR18 ERT MCR25 JZH MCR50 JZH MCR100 JZH 9 +1.0 13 +1.0

7/11 www.rohm.com ○c 2012 ROHM Co., Ltd. All rights reserved. 2012.03 - Rev. A Data Sheet MCR series < Automotive > Products List Limiting Element Voltage (V) Maximum Overload Voltage (V) Temperature Coefficient (ppm / °C) Resistance Tolerance (%) Operating Temperature Range (°C) Type Code Resistance Range SeriesPart No. Rated Power (70°C) (W) MCR006 YZP MCR01 MZP 0.05 25 Jumper type : Rmax = 50m Ω / Imax. = 0.5A Jumper type : Rmax = 50m Ω / Imax. = 1A Jumper type : Rmax = 50m Ω / Imax. = 1A Jumper type : Rmax = 50m Ω / Imax. = 2A Jumper type : Rmax = 50m Ω / Imax. = 2A Jumper type : Rmax = 50m Ω / Imax. = 2A Jumper type : Rmax = 50m Ω / Imax. = 3A Jumper type : Rmax = 50m Ω / Imax. = 4A ∗Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product before using or ordering it. 150 200 200 400 400 200 300 100 0.063 EZP EZP EZP JZH JZH MCR03 MCR10 MCR18 MCR25 MCR100 0.1 0.1 0.125 0.25 ±400 J(±5%) FX(±1%) D(±0.5%) J(±5%) F(±1%) J(±5%) J(±5%) F(±1%) F(±1%) −55 to +125 −55 to +155 −55 to +125 D(±0.5%) ±100 ±50 ±100 ±200 1.0Ω to 9.1Ω 10Ω to 10MΩ 100Ω to 1MΩ 10Ω to 91Ω 10Ω to 10MΩ E24 E24,E96 E24 E24 E24 E24 E24,E96 E24 E24 E24 E24 E24,E96 E24 E24 E24 E24 E24,E96 E24 E24 1.0Ω to 2.0Ω 2.2Ω to 5.1Ω 5.6Ω to 3.3MΩ 500±350 ±500 ±200 +600 / −200 J(±5%) F(±1%) D(±0.5%) ±250 ±100 ±200 ±250 1.0Ω to 9.1Ω 10Ω to 10MΩ 1kΩ to 1MΩ 10Ω to 910Ω 10Ω to 10MΩ E24 E24 E24 E24 E24 +500 / −250 J(±5%) F(±1%) D(±0.5%) ±100 ±50 ±100 ±200 1.0Ω to 9.1Ω 10Ω to 2.2MΩ 100Ω to 1MΩ 10Ω to 91Ω 10Ω to 10MΩ E24 E24,E96 E24 E24 E24 500±350 ±350 ±100 ±200 ±500 1.0Ω to 2.0Ω 10Ω to 22Ω 10Ω to 82kΩ 24Ω to 100kΩ 2.2Ω to 9.1Ω 200 400JZHMCR50 0.5 J(±5%) F(±1%) E24 E24 E24,E96 E24 E24 500±350 ±200 ±100 ±350 ±500 1.0Ω to 2.0Ω 10Ω to 330kΩ 10Ω to 180kΩ 360kΩ to 560kΩ 2.2Ω to 9.1Ω ±400 ±100 ±50 ±100 ±200 1.0Ω to 9.1Ω 10Ω to 2.2MΩ 100Ω to 1MΩ 10Ω to 91Ω 10Ω to 10MΩ 200 400 0.125

0.25 J(±5%)

F(±1%) D(±0.5%) E24 E24,E96 E24 E24 E24 ±400 ±100 ±50 ±100 ±200 1.0Ω to 9.1Ω 10Ω to 2.2MΩ 100Ω to 1MΩ 10Ω to 91Ω 10Ω to 10MΩ 10Ω to 1MΩ±100

8/11 www.rohm.com ○c 2012 ROHM Co., Ltd. All rights reserved. 2012.03 - Rev. A Data Sheet MCR series < Automotive > Chip Resistor Dimensions and Markings <Marking method> There are three or four digi ts used for the calculation number according to IEC code and “R”is used for the decimal point. Part No. Type Code (mm) (inch) L W t a b Marking existence (Unit : mm) 0.25 +0.05 −0.1 Marking method of jumper type Jumper type MCR006 / 01 / 25 / 50 / 100 MCR03 / 10 / 18 No Yes Marking existence Marking method of MCR03 For MCR03 series resistors, the printing process restricts the marking to three digits/characters. Consequently, 1% tolerance resistors with values from the E24 series will be marked the same as 5% resistors with the same value, but 1% tolerance resistors with values from the E96 series will not be marked. Examples: MCR03EZPJ243 (5% tolerance, E24 / 24 k  ) Marking = 243 MCR03EZPFX2402 (1% tolerance, E24 / 24 k  ) Marking = 243 MCR03EZPFX2432 (1% tolerance, E96 / 24.3 k  ) No Marking MCR18EZPJ243 (5% tolerance, E24 / 24 k  ) Marking = 243 MCR18EZPF2402 (1% tolerance, E24 / 24 k  ) Marking = 2402 MCR18EZPF2432 (1% tolerance, E96 / 24.3 k  ) Marking = 2432 Land pattern Example B D A LandC b 103 L W t a Dimensions Part No. Type Code A MCR006 MCR01 MCR03 MCR10 MCR18 MCR25 MCR50 MCR100 YZP MZP EZP EZP EZP JZH JZH JZH 0.3 0.5 0.5 1.2 2.2 2.2 3.8 5.1 B 0.84 1.3 1.3 2.6 4.0 4.0 6.0 8.1 C 0.3 0.5 0.5 1.15 1.5 2.3 2.3 3.0 D 0.27 0.4 0.4 0.7 0.9 0.9 1.1 1.5 (Unit : mm)

9/11 www.rohm.com ○c 2012 ROHM Co., Ltd. All rights reserved. 2012.03 - Rev. A Data Sheet MCR series < Automotive > Derating Curve When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curves below. 100 −55 0 70 100 125 AMBIENT TEMPERATURE (°C) PERCENT RATED POWER (%) /boxsolid MCR006 / 100 Characteristics Test Items Test Conditions Resistor Type Guaranteed Value Jumper Type Resistance Variation of resistance with temperature Solderability Damp heat, steady state Endurance at 70°C Endurance Rapid change of temperature Bend strength of the end face plating Resistance to solvent Resistance to soldering heat Overload ± (2.0%+0.1Ω) Max. 50m Ω ± (1.0%+0.05Ω) ± (3.0%+0.1Ω) Max. 50mΩ Max. 100mΩ See P.1 See P.1 20°C No remarkable abnormality on the appearance. A new uniform coating of minimum of 95% of the surface being immersed and no soldering damage. Without mechanical damage such as breaks. Compliance Standard(s) : IEC60115−8 JISC 5201−8 Measurement : +20 / −55 / +20 / +125°C Soldering condition : 260±5°C Duration of immersion : 10±1s 40°C, 93%RH Test time : 1,000h to 1,048h ± (3.0%+0.1Ω) ± (3.0%+0.1Ω) ± (1.0%+0.05Ω) ± (1.0%+0.05Ω) ± (1.0%+0.05Ω) Max. 100mΩ Max. 100mΩ Max. 50mΩ Max. 50mΩ Max. 50mΩ 70°C Rated voltage (current) 1.5h : ON − 0.5h : OFF Test time : 1,000h to 1,048h 125°C (MCR006 / 25 / 50 / 100) 155°C (MCR01 / 03 / 10 / 18) Test time : 1,000h to 1,048h 23±5 °C, Immersion cleaning, 5±0.5min Solvent : 2−propanol Test temp. −55°C to +125°C 100cyc (MCR006 / 01 / 03) −55°C to +125°C 5cyc (MCR10 / 18 / 25 / 50 / 100) Rosin·Ethanol (25%WT) Soldering condition : 235±5°C Duration of immersion : 2.0±0.5s Rated voltage (current) ×2.5, 2s. Limiting element voltage ×2 : (See P.1) Technical data Parameter Unit MCR006 YZP MCR01 MZP MCR03 EZP MCR10 EZP MCR18 EZP MCR25 JZH MCR50 JZH MCR100 JZH MΩ Fit mg/pc 1000 1000 1000 1000 0.0016 0.157 0.0002 0.70 0.0009 2.12 0.0015 5.03 1000 0.0018 9.46 1000 0.0203 16.5 1000 0.0201 25.8 1000 0.0586 42.0 Insulation resistance Failure rate Weight /boxsolid MCR01 / 03 / 10 / 18 / 25 / 50 100 −55 0 70 100 155 AMBIENT TEMPERATURE (°C) PERCENT RATED POWER (%)

10/11 www.rohm.com ○c 2012 ROHM Co., Ltd. All rights reserved. 2012.03 - Rev. A Data Sheet MCR series < Automotive > Tape Dimensions Paper Tape Embossed Tape A0 P1 P0 P2 F W EφD0 P2 P1 E F W φD0 Base paper (Bottom tape) Components Cavity Top tape 0.7±0.1 1.2 ±0.1 1.1±0.1 1.9 ±0.1 (Unit : mm) WType CodePart No. F E A 0 B0 φ1.5 +0.1 1.65 +0.2 −0.1 2.4 +0.2 −0.1 3.5 +0.15 −0.051.95 +0.1 −0.05 φ1.5 +0.1 φ1.5 +0.1 φ1.5 +0.1 φ1.5 +0.1 2.0±0.05 Max 0.5 2.0±0.05 2.0±0.05 2.0±0.05 2.0±0.05 Max 1.1 Max 1.1 Max 1.1 Max 1.1 D0Type CodePart No. P 0 P1 P2 T2 4.0±0.1 4.0±0.1 4.0±0.1 4.0±0.1 4.0±0.1 MCR006 YZP 2.0±0.05 MCR01 MZP 2.0±0.05 MCR03 EZP 4.0±0.1 MCR10 EZP 4.0±0.1 MCR18 EZP 4.0±0.1 3.0±0.1 3.5 ±0.1 3.4±0.2 5.6 ±0.2 3.5±0.2 6.7 ±0.2 (Unit : mm) WType CodePart No. F E A 0 B0 φ1.5 +0.1 φ1.5 +0.1 φ1.5 +0.1 2.0±0.05 Max 1.1 2.0±0.05 2.0±0.05 Max 1.1 Max 1.1 D0Type CodePart No. P 0 P1 P2 T2 4.0±0.1 4.0±0.1 4.0±0.1 MCR25 JZH 4.0±0.1 MCR50 JZH 4.0±0.1 MCR100 JZH 4.0±0.1

11/11 www.rohm.com ○c 2012 ROHM Co., Ltd. All rights reserved. 2012.03 - Rev. A Data Sheet MCR series < Automotive > Reel Dimensions 0 2 0 4 0 6 0 8 0 2 0 4 0 6 0 8 C AB D Label ACCORDING EIAJ ET-7200B AType CodePart No. B C D (Unit : mm) φ13±0.2φ180 0 −1.5 φ60 +1.0 MCR006 YZP MCR01 MZP MCR03 EZP MCR10 EZP MCR18 EZP MCR25 JZH MCR50 JZH MCR100 JZH 9 +1.0 13 +1.0

R1120Awww.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. Notice ROHM Customer Support System http://www.rohm.com/contact/ Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when design ing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Produc ts. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, commu- nication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. T h e P r o d u c t s a r e n o t d e s i g n e d o r m a n u f a c t u r e d t o b e u s e d w i t h a n y e q u i p m e n t , d e v i c e o r system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel- controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.