MCD200-16IO1 IXYS
Document overview
- PDF pages: 3
Technical content
Page 1
Thyristor Modules
VRSM VRRM
Type
VDSM VDRM
MCC
V V
1500 1400 MCC 200-14io1 MCD 200-14io1 1700 1600 MCC 200-16io1 MCD 200-16io1 1900 1800 MCC 200-18io1 MCD 200-18io1
MCD
Symbol
Conditions
ITRMS /IFRMS TVJ = TVJM ITAVM /IFAVM TC = 90°C; 180° sine
TC = 85°C; 180° sine
ITSM /IFSM
TVJ = 45°C;
t = 10 ms (50 Hz), sine
VR = 0
t = 8.3 ms (60 Hz), sine
TVJ = TVJM
t = 10 ms (50 Hz), sine
VR = 0
t = 8.3 ms (60 Hz), sine
∫∫∫∫∫i2dt
TVJ = 45°C;
t = 10 ms (50 Hz), sine
VR = 0
t = 8.3 ms (60 Hz), sine
TVJ = TVJM;
t = 10 ms (50 Hz), sine
VR = 0
t = 8.3 ms (60 Hz), sine
(di/dt)cr
TVJ = TVJM;
repetitive; IT = 500 A
f = 50Hz; tP = 200µs; VD = 2/3 VDRM; IG = 0.5 A;
non repetitive; IT = 500 A
diG/dt = 0.5 A/µs
(dv/dt)cr
TVJ = TVJM; VDR = 2/3 VDRM RGK = ∞; method 1 (linear voltage rise)
PGM
TVJ = TVJM; tP = 30 µs IT = ITAVM; tP = 500 µs
PGAV
VRGM
TVJ
TVJM
Tstg
VISOL
50/60 Hz, RMS;
t = 1 min
IISOL ≤ 1 mA;
t = 1 s
Md
Mounting torque (M6) Terminal connection torque (M6)
Weight
Typical including screws
ITRMS = 2x340 A
ITAVM = 2x196 A
VRRM = 1400-1800 V
6 7

3 6 7 1 5 4 2
3 1 5 4 2
Maximum Ratings
Features
- International standard package
340 A
- Direct copper bonded Al2O3 -ceramic
196 A base plate
216 A
- Planar passivated chips
8000 A
- Isolation voltage 3600 V~
8600 A
- UL registered, E 72873
- Keyed gate/cathode twin pins
7000 A 7500 A
Applications
320 000
A2s
- Motor control
311 000
A2s
- Power converter
- Heat and temperature control for
245 000
A2s industrial furnaces and chemical
236 000
A2s processes
100 A/µs
- Lighting control
- Contactless switches
Advantages
500 A/µs
- Space and weight savings
- Simple mounting
1000 V/µs
- Improved temperature and power cycling
- Reduced protection circuits
120 W 60 W 20 W
10 V
-40...+125
°C 125 °C
-40...+125
°C
3000 V~ 3600 V~
2.25-2.75/20-25 Nm/lb.in. 4.5-5.5/40-48 Nm/lb.in.
125 g
Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated.
IXYS reserves the right to change limits, test conditions and dimensions
1 - 3
Page 2

Characteristic Values
Symbol
Conditions
IRRM, IDRM
TVJ = TVJM; VR = VRRM; VD = VDRM
15 mA
VT /VF
IT, IF = 200 A; TVJ = 25°C
1.20 V
VT0
For power-loss calculations only (TVJ = 125°C)
0.8 V mΩ
rT
1.0
VGT
VD = 6 V;
TVJ = 25°C
2 V
TVJ = -40°C
3 V
IGT
VD = 6 V;
TVJ = 25°C
150 mA
TVJ = -40°C
220 mA
VGD
TVJ = TVJM;
VD = 2/3 VDRM
0.25 V
IGD
10 mA
IL
TVJ = 25°C; tP = 30 µs; VD = 6 V
200 mA
IG = 0.5 A; diG/dt = 0.5 A/µs
TVJ = 25°C; VD = 6 V; RGK = ∞
IH
150 mA
tgd
TVJ = 25°C; VD = ½ VDRM
2 µs
IG = 0.5 A; diG/dt = 0.5 A/µs
tq
TVJ = TVJM; IT = 300 A, tP = 200 µs; -di/dt = 10 A/µs typ.
200 µs
VR = 100 V; dv/dt = 50 V/µs; VD = 2/3 VDRM
QS
TVJ = TVJM; IT = 300 A, -di/dt = 50 A/µs
550 µC
IRM
235 A
RthJC
per thyristor; DC current
0.13 K/W
per module
0.065 K/W
RthJH
per thyristor; DC current
0.18 K/W
per module
0.09 K/W
dS
Creepage distance on surface
12.7 mm
dA
Strike distance through air
9.6 mm
a
Maximum allowable acceleration
50 m/s2
Optional accessories for modules Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 180L (L = Left for pin pair 4/5)
UL 758, style 1385,
Type ZY 180R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1

Dimensions in mm (1 mm = 0.0394")
voltage drop
IXYS reserves the right to change limits, test conditions and dimensions
2 - 3
Page 3



ITAVM
I2dt
IFAVM
ITSM IFSM
1
ms 10
0 25 50 75 100 125 C 150 TC
t
t
Fig. 5 Ι2dt versus time (1-10 ms)
Fig. 4 Surge overload current
Fig. 6 Maximum forward current
ITSM/FSM: Crest value, t: duration
at case temperature

Ptot
ITRMS/IFRMS
TA
Fig. 7 Power dissipation versus on-state current and ambient temperature (per thyristor or diode)

TA
IdAVM Fig. 8 3~ rectifier bridge: Power dissipation versus direct output current and ambient temperature

ZthJC
Constants for ZthJC calculation (DC):

10-3
10-2
10-1
100
101
102 s t
Fig. 9 Transient thermal impedance junction to case at various condition angles (per thyristor or diode)
IXYS reserves the right to change limits, test conditions and dimensions
3 - 3