MCC161 IXYS
Document overview
- PDF pages: 3
Technical content
Page 1
High Voltage Thyristor Module
VRSM VRRM
Type
VDSM VDRM
V V
2100 2000 MCC 161-20io1 MCD 161-20io1 2300 2200 MCC 161-22io1 MCD 161-22io1
Symbol
Conditions
ITRMS
TVJ = TVJM
ITAVM
TC = 85°C; 180° sine
ITSM
TVJ = 45°C;
t = 10 ms (50 Hz)
VR = 0
t = 8.3 ms (60 Hz)
TVJ = TVJM;
t = 10 ms (50 Hz)
VR = 0
t = 8.3 ms (60 Hz)
I2dt
TVJ = 45°C;
t = 10 ms (50 Hz)
VR = 0
t = 8.3 ms (60 Hz)
TVJ = TVJM;
t = 10 ms (50 Hz)
VR = 0
t = 8.3 ms (60 Hz)
(di/dt)cr
TVJ = TVJM; repetitive, IT = 500 A f = 50 Hz; tP = 200 µs; VD = 2/3 VDRM; IG = 0.5 A; non repetitive, IT = ITAVM diG/dt = 0.5 A/µs
(dv/dt)cr
TVJ = TVJM; VDR = 2/3 VDRM RGK = ∞; method 1 (linear voltage rise)
PGM
TVJ = TVJM; tP = 30 µs IT = ITAVM; tP = 500 µs
PGAV
VRGM
TVJ
TVJM
Tstg
VISOL
50/60 Hz, RMS; t = 1 min IISOL < 1 mA;
t = 1 s
Md
Mounting torque (M6) Terminal connection torque (M6)
Weight
Typical including screws
ITRMS = 2x300 A
ITAVM = 2x165 A
VRRM = 2000-2200 V
MCC 3 6 7 1 5 4 2
6 7

MCD 3 1 5 4 2
Maximum Ratings Features
A • International standard package
300
- Direct Copper Bonded Al2O3-ceramic
165
A base plate
6000
A
- Planar passivated chips
6400
A
- Isolation voltage 3600 V~
5250
A
- UL registered, E 72873
5600
A
- Keyed gate/cathode twin pins
180000
A2s
Applications
170000
A2s
- Motor control
137000
A2s
- Power converter
128000
A2s
- Heat and temperature control for
150 A/µs industrial furnaces and chemical processes
- Lighting control
500 A/µs
- Contactless switches
Advantages
1000 V/µs
- Space and weight savings
- Simple mounting
120 W
- Improved temperature and power
60 W cycling
8 W
- Reduced protection circuits
10 V
-40...125
°C 125 °C
-40...125
°C
3000
V~
3600
V~
2.25-2.75
Nm
4.5-5.5
Nm 125
g
Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated
IXYS reserves the right to change limits, test conditions and dimensions
1 - 3
Page 2
Symbol
Conditions
IRRM, IDRM
VR = VRRM; TVJ = TVJM
VT
IT = 300A; TVJ = 25°C
VT0
For power-loss calculations only (TVJ = TVJM)
rT VGT
VD = 6 V; TVJ = 25°C TVJ = -40°C
IGT
VD = 6 V; TVJ = 25°C TVJ = -40°C
VGD
VD = 2/3VDRM; TVJ = TVJM
IGD
VD = 2/3VDRM; TVJ = TVJM
IL
TVJ = 25°C; VD = 6 V; tP = 30 µs diG/dt = 0.45 A/µs; IG = 0.45 A TVJ = 25°C; VD = 6 V; RGK = ∞
IH tgd
TVJ = 25°C; VD = 1/2 VDRM diG/dt = 0.5 A/µs; IG = 0.5
A
tq
TVJ = TVJM; VR = 100 V; VD = 2/3VDRM; tP = 200 µs dv/dt = 20 V/µs; IT = 160 A; -di/dt = 10A/µs
QS
TVJ = TVJM
IRM
-di/dt = 50 A/µs; IT = 300 A
RthJC
per thyristor; DC current per module
RthJK
per thyristor; DC current per module
dS
Creeping distance on surface
dA
Creepage distance in air
a
Maximum allowable acceleration
Dimensions in mm (1 mm = 0.0394")

Optional accessories for modules

Characteristic Values
40 mA 1.36 V 0.8 V mΩ 1.6 2 V 2.6 V 150 mA 200 mA 0.25 V 10 mA 200 mA
150 mA 2 µs
typ. 150
µs
550 µC 235 A 0.155 K/W 0.078 K/W 0.225 K/W 0.113 K/W 12.7 mm 9.6 mm 50 m/s2
Fig. 2 Gate trigger delay time

Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 180L (L = Left for pin pair 4/5)
UL 758, style 1385,
Fig 3: Forward current vs. voltage
Type ZY 180R (R = right for pin pair 6/7)
CSA class 5851, guide 460-1-1
drop per thyristor/diode
2 - 3
Page 3


ITSM, IFSM
ms
0.001 0.01 0.1 1 1
s
t
t
Fig. 4: Surge overload current
Fig. 5: I2t versus time per diode
ITSM, IFSM = f(t)

°C 125
0 25 50 75 100
10
TC
Fig. 6: Max. forward current at case temperature ITAVM/FAVM = f (TC,d)


Ptot
IDAVM
TA
IFAVM, ITAVM
TA
Fig. 7: Power dissipation vs. on-state current and ambient
Fig. 8: Power dissipation vs. direct output current and
temperature (per thyristor/diode)
ambient temperature (three phase rectifier bridge)

ZthJC
s
10-3
10-2
10-1
100
101 t
Fig. 9: Transient thermal impedance junction to case ZthjC at various conduction angles
RthJC for various condition angles:

Constants for ZthJC calculation (DC):

102
3 - 3