MAMO-007252-IN2960 MACOM
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- High Carrier Suppression
- High 3 I and 5 I Suppression
- LO Power + 10 dBm Typical
- Surface Mount
- Tape and reel packaging available
- 260°C Reflow Compatible
- RoHS* compliant version of the EKIN2-960
Description
M/A-COM’s MAMO-007252-IN2960 is a RoHS Compli- ant passive, high performanc e surface mount Modula- tor. It is ideally suited for Direct Modulation in GSM / E- GSM Cellular Base Stations. The MAMO-007252-IN2960 is available in a SM-28 surface mount package and is designed to be utilized in both RoHS and standard reflow profiles. Parts are packaged in tape & reel.
Ordering Information
MAMO-007252-IN2960 Tape and Reel (300 piece Reel) * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. This PRELIMINARY Data Sheet contains information regarding a product M/A-COM has under development. Performance is based on measured results and target specifications. Commitment to produce in volume is not guaranteed. Pin Configuration Pin No. Function 1 LO
2 Case Ground
3 Case Ground
4 Case Ground
7 Case Ground
Absolute Maximum Ratings 1,2 Parameter Absolute Maximum Impedance 50 Ohms nominal Operating Temperature -55°C to +85°C Storage Temperature -65°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
- North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. E-Series I/Q Modulator 921 – 960 MHz MAMO-007252-IN2960 V1 P RoHS Compliant Electrical Specifications: TA = 25°C, Z0 = 50Ω, LO = +7 dBm Parameter Test Conditions Frequency Units Min Typ Max LO Frequency — 921 - 960 MHz — — — I/Q Frequency — DC - 0.27 MHz — — — LO Carrier Suppression When Q = +90 degrees relative to I; Lower sideband is suppressed. Re- lated to wanted sideband power. 921 - 960 dBc — 27 — SSB Rejection 921 - 960 dBc — 34 — Harmonic Suppression 3 x I/Q 921 - 960 dBc — 40 — Harmonic Suppression 5 x I/Q 921 - 960 dBc — 55 — Conversion Loss — 921 - 960 dB — — 10 (LO) Carrier Power — 921 - 960 dBm — +10 ± 1 — I/Q Drive Level — 921 - 960 dBm — -10 — Typical Performance Curves Conversion Loss