MAMDES0001 MACOM
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- High Carrier Suppression
- High 3 I and 5 I Suppression
- LO Power + 10 dBm Typical
- Surface Mount
- Tape and reel packaging available
Description
M/A-COM’s MAMDES0001 is a passive, high per- formance surface mount Modulator. It is ideally suited for Direct Modulation in PMR/TETRA applica- tions. Parts are packaged in tape & reel.
Ordering Information
MAMDES0001 Tape and Reel (300 piece Reel) Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions Frequency Units Min Typ Max LO Frequency — 851 - 869 MHz — — — I/Q Frequency — DC - 10 MHz — — — LO Carrier Suppression When Q = +90 degrees relative to I; Lower sideband is suppressed. Re- lated to wanted sideband power. 851 - 869 dBc 30 40 — SSB Rejection 851 - 869 dBc 30 35 — Harmonic Suppression 3 x I/Q 851 - 869 dBc 35 45 — Harmonic Suppression 5 x I/Q 851 - 869 dBc 45 55 — Conversion Loss — 851 - 869 dB — 6.5 9 (LO) Carrier Power — 851 - 869 dBm — +10 ± 1 — I/Q Drive Level — 851 - 869 dBm — -10 — LO to RF Isolation — 851 - 869 dB 20 45 —
851 — 869 MHz MAMDES0001 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
- North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. Pin Configuration Pin No. Function 1 LO
2 Case Ground
3 Case Ground
4 Case Ground
7 Case Ground
Absolute Maximum Ratings 1 1. Operation of this device above any one of these parameters may cause permanent damage. Parameter Absolute Maximum Impedance 50 Ohms Nominal Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C Pin Temperature (10 seconds) 260°C Typical Performance Conversion Loss Suppression Lo to RF Isolation RES BW 1 0/ kHz VBW 1 0/ kHz SWP 3 0/ . 0/ msec AT 1 0/ dBREF -15.9 dBm LOG 10 / dB/ CENTER 869. 0/ 0/ 0/ MHz SPAN 1. 0/ 0/ 0/ MHz -4.61 dB MKR 869. 0/ 0/ 0/ MHz PEAK VA SB SC FC CORR SPAN 1. 0/ 0/ 0/ MHz 15:28: 0/ 7 27 SEP 2 0/ 0/ 0/ CLEAR WRITE A MAX HOLD A VIEW A BLANK A Trace A B C More 1 of 3 RES BW 1 0/ kHz VBW 1 0/ kHz SWP 3 0/ . 0/ msec AT 1 0/ dBREF -2 0/ .5 dBm LOG 10 / dB/ CENTER 851. 0/ 0/ 0/ MHz SPAN 1. 0/ 0/ 0/ MHz -36.14 dB MKR -2 0/ 0/ kHz PEAK VA SB SC FC CORR MARKER -2 0/ 0/ kHz -36.14 dB 14:23:21 27 SEP 2 0/ 0/ 0/ CLEAR WRITE A MAX HOLD A VIEW A BLANK A Trace A B C More 1 of 3 RES BW 1 0/ kHz VBW 1 0/ kHz SWP 3 0/ . 0/ msec AT 2 0/ dBREF 3.1 dBm LOG 10 / dB/ CENTER 851. 0/ 0/ 0/ MHz SPAN 1. 0/ 0/ 0/ MHz -57. 0/ 3 dB MKR 0/ Hz PEAK WA SB SC FC CORR MARKER 0/ Hz -57. 0/ 3 dB 15:49: 0/ 5 27 SEP 2 0/ 0/ 0/ MARKER CF MARKER NEXT PEAK NEXT PK RIGHT NEXT PK LEFT More 1 of 2