MABA-007159-000000 MACOM
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Surface mount
- Wide frequency range
- 1:1 impedance
- Lead Free
- RoHS equivalent to the ETC1-1-13 transformer
- RoHS* Compliant and is 2600C reflow compatible.
- Available on Tape and Reel, reel quantity 2000
Description
M/A-COM’s MABA-007159-000000 is a RoHS compli- ant 1:1 RF transmission line transformer in a low cost, surface mount package. The windings of the MABA- 007159-000000 are welded to the package substrate for improved reliability and to eliminate lead content. Ideally suited for high volume cellular and wireless application. Parts are packaged in tape & reel.
Ordering Information
MABA-007159-000000 2000 piece reel Note: Reference Application Note M513 for reel size information. Pin Configuration Pin No. Function
1 Secondary Dot
2 Not Connected
3 Secondary
4 Primary
5 Primary Dot
This PRELIMINARY Data Sheet contains information regarding a product M/A-COM has under development. Performance is based on measured results and target specifications. Commitment to produce in volume is not guaranteed. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. SM-22 package 12 3 5 4 Schematic Absolute Maximum Ratings 1,2 Parameter Absolute Maximum DC Power 250 mW DC Current 30 mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. Primary Dot 5 Primary 4
RF 1:1 Transmission Line Transformer 4.5 — 3000 MHz MABA-007159-000000 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
- North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. V3P RoHS Compliant Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter Test Conditions Units Min Typ Max RF Frequency 4.5 - 3000 MHz - - - Insertion Loss 4.5 - 1000 1000 - 2000 2000 - 3000 dB dB dB 0.32 1.0 2.0 3.5 Amplitude Unbalance 4.5 - 1000 dB - - 1.0 Phase Unbalance 4.5 - 1000 Degrees - - 20 Test Conditions Input Impedance Phase Unbalance Amplitude Unbalance Typical Performance Curves Insertion Loss