B-498 BRADY
Document overview
- PDF pages: 3
Technical content
Page 1
Technical Data Sheet
BRADY B498 THERMAL TRANSFER PRINTABLE, REPOSITIONABLE COATED VINYL CLOTH LABEL STOCK
TDS No. B498 Effective Date: 06/06/2008
Description:
GENERAL
Print Technology: Thermal Transfer Material Type: Coated Vinyl Cloth Finish: SemiGloss White, Yellow and Orange Adhesive: Repositionable Rubber Based
APPLICATIONS
Wire, cable, and general identification numbers, letters and conduit and voltage markers
RECOMMENDED RIBBONS WHITE MATERIAL
Brady Series R6200 (Brady Series R4300 and R6000 ribbons also acceptable)
REGULATORY/AGENCY APPROVALS
UL: B498 is a UL Recognized Component to UL969 Labeling and Marking Standard when printed with Brady Series R6200 ribbon. See UL file MH17154 for specific details. UL information can be accessed online at UL.com. Search in Certifications area.
Brady B498 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC.
SPECIAL FEATURES
B498 has a specially formulated top coat for very good thermal transfer print quality. The adhesive and cloth backing give excellent holding power, yet allow for clean removal and repositioning.
Details:
| PHYSICAL PROPERTIES | TEST METHODS | AVERAGE RESULTS |
| Total Thickness | ASTM D1000 | 0.0073 inch (0.185 mm) |
| Adhesion to: Stainless Steel Polypropylene | ASTM D1000 20 minute dwell 24 hour dwell 20 minute 24 hour dwell | 65 oz/inch (71 N/100 mm) 70 oz/inch (77 N/100 mm) 56 oz/inch (61 N/100 mm) 63 oz/inch (69 N/100 mm) |
| Tack | ASTM D 2979 PolykenTM Probe Tack (1 second dwell, 1 cm/sec separation) | 35 oz (1000 g) |
| Application Temperature | Lowest application temperature to stainless steel | 50oF (10oC) |
| Tensile Strength and Elongation | ASTM D1000 Machine Direction | 55 lbs./in (960 N/100 mm) 6% |
The following testing is performed with the B498 printed with the Brady Series R6200 ribbon. All samples were allowed to dwell 24 hours prior to testing. Samples were tested on flat aluminum panels and wrapped around 0.080" O.D. TFE wires.
| PERFORMANCE PROPERTIES | TEST METHODS | TYPICAL RESULTS |
|---|---|---|
| High Service Temperature | 30 days at 175oF (80oC) | Slight darkening. Topcoat appears more clothlike. No visible effect on print quality. |
| Low Service Temperature | 30 days at 40oF (40oC) | No visible effect |
| Humidity Resistance | 30 days at 100oF (38oC), 95% R.H. | Topcoat appears more clothlike. No visible effect on print quality. |
| UV Light Resistance | 30 days in UV SunlighterTM 100 | No visible effect |
| Weatherability* | ASTM G155, Cycle 1 30 days in Xenon Arc Weatherometer | Topcoat appears more clothlike. Some edge lift on flat panel samples. No lift on wrapped wiremarkers. No visible effect on print quality. |
Salt Fog Resistance
ASTM B117
Topcoat appears more clothlike. Slight
Page 2
| 30 days in 5% salt fog solution chamber | edge lift on flat panel samples. No lift on wrapped wiremarkers. No visible effect on print quality. | |
| Abrasion Resistance | Fed. Std. 191A, Method 5306 Taber Abraser, CS10 grinding wheels, 250 g/arm | Moderate print removal after 100 cycles. Print still legible. |
\*Not intended for extended, direct exposure to outdoor weathering.
PERFORMANCE PROPERTY
CHEMICAL RESISTANCE
Samples of white were printed with the Series R6200 ribbon, laminated to flat aluminum panels and wrapped around 0.080" OD TFE jacketed wire, and allowed to dwell 24 hours prior to test. Testing consists of 5 cycles of 10 minute immersions in the specified chemicals followed by 30 minute recovery periods. After the final immersion the flat samples were rubbed with cotton swabs. Testing was conducted at room temperature except where noted.
| CHEMICAL REAGENT | SUBJECTIVE OBSERVATION OF VISUAL CHANGE | |
| CLEANERS & SOLVENTS | APPEARANCE OF WIREMARKER | APPEARANCE OF R6200 PRINT |
| NorthwoodsTM Buzz Saw Degreaser | No visible effect | No visible effect |
| Formula 409® | No visible effect | No visible effect |
| Acetone | Slight unwrap, topcoat removed, slight adhesive ooze | Topcoat removed, print removed |
| Toluene | Severe unwrap, topcoat removed, adhesive ooze | Topcoat removed, print removed |
| Isopropyl Alcohol | Severe unwrap | No visible effect |
| Mineral Spirits | Severe unwrap, moderate adhesive ooze | No visible effect |
| Deionized Water | No visible effect | No visible effect |
| FUELS, OILS, & LUBRICANTS | APPEARANCE OF WIREMARKER | APPEARANCE OF R6200 PRINT |
| Gasoline | Moderate unwrap, some adhesive ooze | No visible effect w/o rub, moderate print smear when rubbed |
| Brake Fluid | Slight unwrap | No visible effect w/o rub, severe print smear when rubbed |
| SAE 20 WT Motor Oil @ 70oC | No visible effect | No visible effect |
| Ideal Yellow 77® Wire Pulling Lubricant | No visible effect | No visible effect |
| AEROSPACE RELATED FLUIDS | APPEARANCE OF WIREMARKER | APPEARANCE OF R6200 PRINT |
| JP8 Jet Fuel | Severe unwrap, adhesive ooze | No visible effect |
| Skydrol® 500B4 | Slight unwrap, topcoat removed | Topcoat removed, print removed |
| Mil 5606 Oil | Slight unwrap, some adhesive ooze | No visible effect |
Yellow and orange material Printed black legend
CHEMICAL RESISTANCE RUB, DIP, IMMERSION
| B498 Orange Reagent | Rub | Dip | Immersion | B498 Yellow Reagent | Rub | Dip | Immersion |
| 30% Sulfuric Acid | NE | NE | NE | 30% Sulfuric Acid | NE | NE | NE |
| 10% Sulfuric Acid | NE | NE | NE | 10% Sulfuric Acid | NE | NE | NE |
| 30% Hydrochloric acid | NE | NE | F | 30% Hydrochloric acid | NE | NE | F |
| 10% Hydrochloric acid | NE | NE | NE | 10% Hydrochloric acid | NE | NE | NE |
| Glacial Acetic | F | NT | NT | Glacial Acetic | F | F | F |
| 5% Acetic Acid | NE | NE | NE | 5% Acetic Acid | NE | NE | F |
| 50% Sodium Hydroxide | NE | F | NT | 50% Sodium Hydroxide | NE | NE | F |
| 10% Sodium Hydroxide | F | NT | NT | 10% Sodium Hydroxide | NE | NE | F |
| 10% Ammonia | NE | NE | NE | 10% Ammonia | NE | NE | NE |
| 5% Sodium Hypochlorite | NE | NE | F | 5% Sodium Hypochlorite | NE | NE | NE |
| 10% Sodium Chloride | NE | NE | NE | 10% Sodium Chloride | NE | NE | F |
| MEK | F | NT | NT | MEK | F | F | F |
| Acetone | F | NT | NT | Acetone | F | F | F |
| Toluene | F | NT | NT | Toluene | F | F | F |
| Methanol | F | F | NT | Methanol | F | NE | F |
| IPA | F | NE | F | IPA | F | NE | F |
| Heptane | F | NE | F | Heptane | NE | NE | F |
| Mineral Spirits | F | NT | NT | Mineral Spirits | NE | NE | F |
| Turpentine | F | NT | NT | Turpentine | F | F | F |
| Diesel Fuel | NE | F | NT | Diesel Fuel | NE | NE | F |
| Kerosene | F | NT | NT | Kerosene | NE | NE | F |
Page 3
| Gasoline | F | NE | NE | Gasoline | F | F | F |
| ASTM #3 Oil | NE | NE | NE | ASTM #3 Oil | NE | NE | NE |
| SAE 20 Oil | NE | NE | NE | SAE 20 Oil | NE | NE | F |
| Alconox® | NE | NE | NE | Alconox ® | NE | NE | F |
| Water | NE | NE | NE | Water | NE | NE | NE |
NE = No Effect F = Failed (affected sample)
7 Day Immersions: Immersed in reagent for 7 days Dip Test: Five 10 minute dips in reagent with 30 minute recovery Rub Test: Rubbed sample for 30 second with swab soaked in reagent
Product testing, customer feedback, and history of similar products support a customer performance expectation of at least two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80 degrees F (27°C) and 60% RH. We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use in their actual applications.
Trademarks: Formula 409® is a registered trademark of the Clorox Company Northwoods™ is a trademark of the Superior Chemical Corporation. Polyken™ is a trademark of Testing Machines Inc. Skydrol® is a registered trademark of the Monsanto Company Sunlighter™ is a trademark of the Test Lab Apparatus Company Yellow 77® is a registered trademark of Ideal Industries, Inc. ASTM: American Society for Testing and Materials (U.S.A.) SAE: Society of Automotive Engineers (U.S.A.) S. I.: International System of Units UL: Underwriters Laboratories Inc. (U.S.A.)
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.
WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no
circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.
Copyright 2016 Brady Worldwide, Inc. | All Rights Reserved Material may not be reproduced or distributed in any form without written permission.
Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 4143586600 | Fax: 8002922289