LWCU00452522142Y00 LEIDITECH
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
1 Scope:
2 Part Numbering:
3 Rating:
20℃~25℃ R.H.65%(In Tape & Reel Condition)
4 Marking:
5 Standard Testing Condition
Temperature Ordinary Temperature(15 to 35 ℃) Ordinary Humidity(25 to 85% RH) 20 to 30℃ Humidity 50 to 80 %RH This specification applies to BWCU FILTER Operating Temperature: -40℃~105℃(Including self - temperature rise) Storage Temperature: Unless otherwise specified Control code Product symbol LWCU00452522142Y00 LWCU Rev : www.leiditech.com 01.06.2019 1/8
6 Configuration and Dimensions:
7 Electrical Characteristics:
Z RDC Irms Tolerance Test Freq. (Ω)( Ω)Max. (mA)Max. (±%) (MHz) LWCU00452522142 □0 1400 0.4 1000 25 100 Part No. 2.59 H 3.36 G 0.46 F 0.75 E 1.02 D 2.20±0.2 C 2.50±0.2 B 4.50±0.2 A LWCU00452522 TYPE Dimensions in mm I 5.03 LWCU00452522142Y00 Rev : www.leiditech.com 01.06.2019 2/8
8 LWCU Series
8.1 Construction:
8.2 Material List:
Rev : www.leiditech.com 01.06.2019 3/8
9 Common Mode Choke / RELIABILITY TEST
1-1.Environmental Performance No Item Specification Test Method 1-1-1 Temperature Cycle Appearance: No Damage One cycle: Impedance: within±20% of Step Temperature (℃) Time (min) initial value 1 -40±3 30 2 25±2 3 3 105±3 30 4 25±2 3 Total: 5 cycles Measured After Exposure in The Room Condition For 1hrs 1-1-2 Humidity Resistance Temperature: 40±2℃ Relative Humidity: 90 ~ 95% Time: 100hrs Measured After Exposure In The Room Condition For 1hrs 1-1-3 High Temperature Resistance Temperature: 85±3℃ Time: 50Hrs Measured After Exposure In The Room Condition For 1Hrs 1-1-4 Low Temperature Resistance Temperature: -40±3℃ Time: 50Hrs Measured After Exposure In The Room Condition For 1Hrs 1-1-5 High Temperature Load Life There should be no evidence Temperature: 85±3℃ of short or open circle Load: Allowed DC Current Time: 500Hrs 1-1-6 Humidity Load Life Temperature: 40±2℃ Relative Humidity: 90~95% Load: Allowed DC Current Time: 500Hrs 1-2.Mechanical Performance No Item Specification Test Method 1-2-1 Resistance To Soldering Heat Appearance: No Damage 1. The device should be reflow soldered on PCB (peak 260℃±5℃ for 10 seconds) 2. Solder Composition: Sn/Ag3.0/Cu0.5 3. Test time: 6 minutes 1-2-2 Solder ability The electrodes shall be 1. Pre-Heating: 150℃,1min. at least 95% covered 2. Solder Composition: Sn/Ag3.0/Cu0.5 with new solder coating 3. Solder Temperature: 245±5℃. 4. Immersion Time: 4±1 sec. 1-2-3 Commponent Adhesion 1 Lbs. For CUW11/MCF11 The device should be reflow soldered (245±5℃ For (Push Test) 2 Lbs. For other 10 seconds) to a tinned copper substrate. A force guauge should be applied to the side of the component. The device must withstand a minimum force of 2 pounds without a failure of the termination attached to component LWCU00452522142Y00 Rev : www.leiditech.com 01.06.2019 4/8
Rev : www.leiditech.com 01.06.2019 5/8
10 Packaging:
10.1 Packaging -Cover Tape
The force for tearing off cover tape is 10 to 100 grams in the arrow direction.
10.2 Packaging Quantity
10.3 Reel Dimensions
Reel Dimensions : m/m TYPE ABCD LWCU00452522 178 60 12 1.5 LWCU00452522 LWCU00452522142Y00 Rev : www.leiditech.com 01.06.2019 6/8
12 Recommended Land Pattern:
LWCU00422522 0.46 3.36 2.59 5.03
13 Note:
- Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 2. Do not knock nor drop. 3. All the items and parameters in this product specification have been prescribed on the premise that our product is used for the purpose,under the condition and in the environment agreed upon between you and us. You are requested not to use our product deviating from such agreement. 4. Please keep the distance between transformer/coil and other components (refer to the standard IEC 950) 5. The moisture sensitivity level (MSL) of products is classified as level 1. LWCU00452522142Y00 Rev : www.leiditech.com 01.06.2019 7/8
14 Graph:
IMPEDANCE vs. FREQUENCY CHARACTERISTICS 0.1 100 1000 10000 1 10 100 1000 10000 FREQUENCY(MHz) IIMPEDANCE(OHM) COMMON NORMAL COMMON MODE NORMAL MODE LWCU00452522142Y00 Rev : www.leiditech.com 01.06.2019 8/8 Shanghai Leiditech Electronic Co.,Ltd Email: sale1@leiditech.com Tel : +86- 021 50828806 Fax : +86- 021 50477059