LPT60 ETC1
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
America’s (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-966296 Special Features
60 Watts
rev 12.01.01 VDE 0805/EN60950 (IEC950) 11774-3336-1255 (LC #86665) UL UL1950 E132002 CSA CSA 22.2-234 Level 3 LR53982C NEMKO EN 60950/EMKO-TUE P95100123 (74-sec) 203 BABT EN60950/BS7002 PS / 605273 CB Certificate and report 1518, 1519, 1520 CE Mark (LVD)
- Universal input
- 3” x 5” footprint
- Remote sense on main output
- Built-in EMI filter
- Low output ripple
- Adjustable main output
- Overvoltage protection
- O v e r l o a d p r o t e c t i o n
- 110 KHz switching frequency
- LPX60 enclosure kit available Operating temperature: 0°to 50°C ambient derate each output at 2.5% per degree from 50°to 70°C Electromagnetic susceptibility: designed to meet Humidity: Operating; non-condensing 5% to 95% Vibration: Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75G peak 5 Hz to 500 Hz, operational Storage temperature: -40°to 85°C Temperature coefficient: ±.04% per °C MTBF demonstrated: >550,000 hours at full load and 25°C ambient conditions Input Input range 85-264 VAC 120-300 VDC Frequency 47-440 Hz Inrush current <18 A peak @ 115 VAC; <36 A peak @ 230 VAC, cold start @ 25°C Input current 1.5 A max. (RMS) @ 115 VAC Efficiency 70% typical at full load (60% for LPT61) EMI filter FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted Safety ground leakage current <0.5 mA @ 50/60 Hz, 264 VAC input Output Maximum power 60 W for convection (LPT61, 35 W);
80 W with 30 CFM forced air (LPT61,
55 W) Adjustment range -5, +10% minimum Cross regulation ±2% on output 1; ±5% on outputs 2,3 Hold-up time 20 ms @ 60 W load, 115 VAC nominal line Overload protection Short circuit protection on all outputs. Case overload protected @ 110-145% above peak rating Overvoltage protection 5.7-6.7 VDC on main output LPT61: 3.6 to 4.6 VDC Remote sense Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected. Environmental Safety Total Power: 60-80 Watts Input Voltage: 85-264 VAC 120-300 VDC # of Outputs: Triple
Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44(1384) 843-355 AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 97www.astec.com
Ordering Information
Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Model Output Minimum Maximum Load with Maximum Load with Peak Regulation2Ripple Number Voltage Load Convection Cooling 30 CFM Forced Air Load1 P/P (PARD)3 LPT61 +3.3 V 0.7A 5 A 8.5 A 9.5 A ±2% 50mV +5 V 0 A 2.5 A 3.0 A 3.3 A ±2% 50mV +12 V 0 A 0.5 A 1.0 A 1 A ±5% 120mV LPT62 +5 V 0.7 A 7 A 8 A 10 A ±2% 50 mV +12 V 0.3 A 3 A 3.5 A 6 A ±5% 120 mV -12 V 0 A 0.7 A 1 A 1.5 A ±5% 120 mV LPT63 +5 V 0.7 A 7 A 8 A 10 A ±2% 50 mV +15 V 0.3 A 2.8 A 3.3 A 4 A ±5% 150 mV -15 V 0 A 0.7 A 1 A 1.5 A ±5% 150 mV LPT64 +5 V 0.7 A 7 A 8 A 10 A ±2% 50 mV +12 V 0.3 A 3 A 3.5 A 6 A ±5% 120 mV -5 V 0 A 0.7 A 1 A 1.5 A ±5% 50 mV LPT65 +5 V 0.7 A 7 A 8 A 10 A ±2% 50 mV +24 V 0.1 A 1.5 A 2.0 A 3 A ±7% 240 mV +12 V 0 A 0.7 A 1 A 1.5 A ±5% 120 mV LPT66 +5 V 0.7 A 7 A 8 A 10 A ±2% 50 mV +24 V 0.1 A 1.5 A 2.0 A 3 A ±7% 240 mV -12 V 0 A 0.7 A 1 A 1.5 A ±5% 120 mV LPT67 +5 V 0.7 A 7 A 8 A 10 A ±2% 50 mV +24 V 0.1 A 1.5 A 2.0 A 3 A ±7% 240 mV -5 V 0 A 0.7 A 1 A 1.5 A ±5% 50 mV 1. Peak current lasting <30 seconds with a maximum 10% duty cycle. 2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 4. Minimum Loads are required. Mating Connectors AC Input: Molex 09-50-8031 (USA) 09-91-0300 (UK) PINS: 08-58-0111 DC Outputs: Molex 09-50-8061 (USA) 09-91-0600 (UK) PINS: 08-58-0111 Remote Sense: Molex 22-01-2025 PINS: 08-50-0114 Astec Connector Kit #70-841-006, includes all of the above. Connector LPT61 LPT62LPT63 LPT64 LPT65 LPT66 LPT67 SK1-1 Neutral Neutral Neutral Neutral Neutral Neutral Neutral SK1-3 Line Line Line Line Line Line Line SK2-1 5 V +12 V +15 V +12 V +24V +24V +24V SK2-2 3.3 V +5 V +5 V +5 V +5 V +5 V +5 V SK2-3 3.3 V +5 V +5 V +5 V +5 V +5 V +5 V SK2-4 CommonCommon Common Common Common Common Common SK2-5 CommonCommon Common Common Common Common Common SK2-6 +12V -12 V -15 V -5 V +12 V -12 V -5 V SK201-1 +Sense +Sense +Sense +Sense +Sense +Sense +Sense SK201-2 -Sense -Sense -Sense -Sense -Sense -Sense -Sense Pin Assignments Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ±.02”. 3. Mounting holes M1 and M2 should be grounded for EMI purposes. 4. Mounting hole M1 is safety ground connection. 5. Specifications are for convection rating at factory settings at 115 VAC input, 25°C unless otherwise stated. 6. Warranty: 1 year 7. Weight: 0.75 lb. / 0.34 kg 3.00" (76.2) 2.55" (64.8) 0.22" (5.6) 1.65" (41.9) 0.12" (3) 4.55" (115.6) 5.00" (127) SK 1 SK 2 0.15" (4) DIA (4 places) GND N L M1 M2 Remote Sense ConnectorSK201 Voltage Adj. Pot Power Derating Curve Output Power (Watts) 0°C 20W 40W 60W 80W 10°C2 0°C3 0°C4 0°C5 0°C6 0°C7 0°C TA – Ambient Temperature – °C Natural Convection Cooling 40W 30W