LP101 ETC1

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

MODEL VOLTAGE OUTPUT OUTPUT % NUMBER RANGE VOLTAGE CURRENT NO LOAD FULL LOAD EFF LP101 9-18VDC 5VDC 5000mA 30mA 2670mA 78 LP102 9-18VDC 12VDC 2000mA 30mA 2500mA 80 LP103 9-18VDC 15VDC 1650mA 30mA 2575mA 80 LP104 9-18VDC ±5VDC ±2500mA 30mA 2670mA 78 LP105 9-18VDC ±12VDC ±1000mA 30mA 2500mA 80 LP106 9-18VDC ±15VDC ±830mA 30mA 2590mA 80 LP107 9-18VDC 5/±12VDC 2500/±500mA 30mA 2550mA 80 LP108 9-18VDC 5/±15VDC 2500/±400mA 30mA 2550mA 80 LP201 18-36VDC 5VDC 5000mA 20mA 1560mA 66 LP202 18-36VDC 12VDC 2000mA 20mA 1525mA 66 LP203 18-36VDC 15VDC 1650mA 20mA 1525mA 68 LP204 18-36VDC ±5VDC ±2500mA 20mA 1560mA 67 LP205 18-36VDC ±12VDC ±1000mA 20mA 1525mA 66 LP206 18-36VDC ±15VDC ±830mA 20mA 1525mA 71 LP207 18-36VDC 5/±12VDC 3000/±625mA 20mA 1520mA 82 LP208 18-36VDC 5/±15VDC 3000/±500mA 20mA 1525mA 82 LP301 36-72VDC 5VDC 5000mA 20mA 760mA 69 LP302 36-72VDC 12VDC 2000mA 20mA 745mA 67 LP303 36-72VDC 15VDC 1650mA 20mA 740mA 70 LP304 36-72VDC ±5VDC ±2500mA 20mA 760mA 69 LP305 36-72VDC ±12VDC ±1000mA 20mA 740mA 68 LP306 36-72VDC ±15VDC ±830mA 20mA 740mA 70 LP307 36-72VDC 5/±12VDC 3000/±625mA 20mA 745mA 84 LP308 36-72VDC 5/±15VDC 3000/±500mA 20mA 745mA 84 MODELS CHART NOTE: Nominal Input Voltage 12, 24, or 48 VDC LP Series: 25/30 WATT Low Profile DC/DC Converters

FEATURES

 2:1 Input Range  External Output Trim  Isolated Outputs  Remote Disable  Efficiency to 84%  Six-sided Shield  100 kHz Switching Frequency  PCB Mountable

260 Hopping Brook Road

Holliston, Massachusetts 01746 Tel. (508) 429-4440 Fax (800) 226-2100 http://www.intlpower.com International Power Sources, Inc.

OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS ELECTRICAL SPECIFICATIONS All specifications typical at nominal line, full load and 25°C DIMENSIONS AND CONNECTIONS Voltage Balance, Dual Output at Transient Response: 1% P-P max Line Regulation Use External Fuse 9 ohms min. (65 x 76.2 x 10.2 mm) Non-Conductive Base NOTE: 1. Measured from High Line to Low Line. 2. Measured from Full Load to 1/4 Full Load. 3. Determine the correct fuse size by calculating the maximum DC current drain at low line input, maximum load and then adding 20 to 25% to get the desired fuse size. 4. A 10% minimum load is required on dual and triple output models for rated performance. Dimensions in inches (mm) Specifications subject to change. SINGLE DUAL TRIPLE PIN OUTPUT OUTPUT OUTPUT

1 REMOTE ON/OFF REMOTE ON/OFF REMOTE ON/OFF

4 NO PIN NO PIN NO PIN

5 NO PIN + OUTPUT + OUTPUT

6 OUTPUT TRIM COMMON COMMON

7 NO PIN - OUTPUT - OUTPUT

8 + OUTPUT OUTPUT TRIM +5V OUTPUT 9 - OUTPUT NO PIN NO PIN

10 NO PIN NO PIN OUTPUT TRIM

Logic Compatibility . .CMOS or Open Collector TTL Input Resistance . . . .(E in0 VDC to 9 VDC) 100KO EXTERNAL OUTPUT TRIMMING OUTPUT MAY OPTIONALLY BE EXTERNALLY TRIMMED (±5%) WITH A FIXED RESISTOR OR AN EXTERNAL TRIMPOT AS SHOWN. EXTERNAL OUTPUT TRIMMING OUTPUT MAY OPTIONALLY BE EXTERNALLY TRIMMED (±5%) WITH A FIXED RESISTOR OR AN EXTERNAL TRIMPOT AS SHOWN.