LM201209-150M LEIDITECH

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

产 品 承 认 书 SPECIFICATION FOR APPROVAL 上海雷卯电子科技有限公司 Shanghai Leiditech Electronic Technology Co.,Ltd 客户名称 CUSTOMER NAME. 产品类型 PRODUCT TYPE 客户料号 CUSTOMER P/N 料号 OURS P/N 承 认 APPROVED 确 认 CHECKED 文件编号 FILE NO. 批 准 APPROVED 确 认 CHECKED 作 成 DESIGN 承 办 DESIGN linchen 批注/REMARK ming 客户承认/CUSTOMER ACCEPTED 电感 LM201209-150M LM201209-150M

DIMENSION:(m/m) A 2.0 ± 0.2 m/m B 1.2 ± 0.2 m/m C 0.9 ± 0.2 m/m D 0.5 ± 0.2 m/m E m/m F m/m G m/m H m/m I m/m J m/m K m/m L m/m M m/m N m/m O m/m ELECTRICAL REQUIREMENTS TEST INSTRUMENTS

  • HP 4338A MILLIOHMMETER ○HP 4195A NETWORK/SPECTRUM ANALYZER ○HP 4284A BIAS CURRENT SOURCE ○HP 4285A PRECISION LCR METER ○HP 4286A PRECISION LCR METER
  • HP 4291B RF IMPEDANCE /MATERIAL ANALYZER ○HP 6632A DC POWER SUPPLY L 15 ± 10% UH TEST FREQ. 1MHz/100mV Q 50 MIN TEST FREQ. 1MHz/100mV Srf 19 MHz MIN TEST FREQ. MHz Rdc 0.5 Ω±30% TEST FREQ. MHz Idc 140 mA MAX TEST FREQ. MHz LM201209-150M

ITEM (m/m) (m/m) (m/m) (m/m) (UH) (Ω) TEST FREQ. 1MHz 1MHz LM201209-150M

Item Performance Test condition Operating temperature range -55 oC to + 125 oC Storage temperature and umidity ranges 40 oC MAX., 70% RH MAX. Soldering heat resistance The chip shall not be cracks. More than 75% of terminal electrode shall be covered with solder. Preheat: 150 oC, 60 seconds Solder temperature : 260  5 oC Flux: Rosin Dip time: 10  1 seconds Solderability More than 90% of the terminal electrode shall be covered with new solder. Preheat: 150 oC, 60 seconds Solder temperature: 245  5 oC Flux: Rosin Dip time: 4  1 seconds Recommended Soldering Conditions (REFLOW TEMPERATURE PROFILE) Lead-Free A 260 ± 5℃ B 230 ± 5℃ C 30 ±10 sec D 150℃ E 180℃ F 90 ± 30sec 245℃ LM201209-150M

The terminal electrode and the body shall not be damaged by the forces applied on the right conditions. Bending strength The body shall not be damaged by the forces applied on the right conditions. Type P (kgf) Time (s) LM100505 0.3 LM160808 0.5 LM201209 0.6 LM201212 0.8 LM321611 1.0 LM322513 1.0 30  5 LM451616 1.0 LM453215 1.5 LM3216M4 0.5 Type A (mm) P (kgf) LM160808 1.0 0.5 LM201209 1.4 1.0 LM201212 1.4 1.2 LM321611 2.0 2.0 LM322513 2.0 2.5 LM451616 2.5 2.5 LM453215 2.7 2.5 LM3216M4 1.4 1.0 P(N) Item Performance Test condition High temperature resistance Appearance: Ferrite shall not be damaged. Impedance: Within±20% of the initial value. Temperature: 85±2℃ Testing time: 1008±12 hours Measurement: After placing for 24 hours min. LM201209-150M

Item Performance Test condition Humidity resistance Appearance: Ferrite shall not be damaged. Impedance: Within±20% of the initial value Humidity: 90 to 95% RH Temperature: 40±2℃ Testing time: 1008±12 hours Measurement: After placing for 24 hours min. Thermal Shock Appearance: Cracking, chipping or any other defects harmful to the characteristics shall not be allowed. Impedance: Within±20% of the initial value Temperature: -40℃, +85℃, kept stabilized for 30 minutes each Cycle: 100 cycles Measurement: After placing for 24 hours min. Low temperature storage life test Appearance: Cracking, chipping or any other defects harmful to the characteristics shall not be allowed. Impedance: Within±20% of the initial value. Temperature: -40±2℃ Testing time: 1008±12 hours Measurement: After placing for 24 hours min. LM201209-150M

 Tape dimensions and packaging quantities Carrier tape material: paper material: Paper ( Dimensions in mm) TYPE A B W P T CHIPS / REEL 100505 0.62 1.12 8 2 0.60 10000 160808 1.10 1.90 8 4 0.95 4000 201209 1.50 2.30 8 4 0.95 4000 material: Polystyrene ( Dimensions in mm) TYPE A B W P T CHIPS / REEL 160808 1.01 1.80 8 4 1.02 4000 201209 1.42 2.25 8 4 1.04 4000 201212 1.50 2.35 8 4 1.45 3000 321611 1.88 3.50 8 4 1.27 3000 322513 2.77 3.42 8 4 1.55 2000 451616 1.93 4.95 12 4 1.93 2000 453215 3.66 4.95 12 8 1.85 1000 TA3216M4 1.88 3.50 8 4 1.40 3000 LM201209-150M

 Reel dimensions Dimensions in mm TYPE 8mm 12mm A 178±2 178 ±2 G 10.0 14.0 N 75 75 T 12.5 16.5 Shanghai Leiditech Electronic Co.,Ltd Email: sale1@leiditech.com Tel : +86- 021 50828806 Fax : +86- 021 50477059 LM201209-150M