LM185-1.2/LM285-1.2/LM385-1.2 Micropower Voltage Reference Diode datasheet (Rev. E)

Document overview

  • Manufacturer or author: Texas Instruments, Incorporated [SNVS742,E]
  • PDF pages: 30

Technical content

LM185-1.2-N,LM285-1.2-N,LM385-1.2-N www.ti.com SNVS742E –JANUARY 2000–REVISED APRIL 2013 LM185-1.2-N/LM285-1.2-N/LM385-1.2-NMicropowerVoltageReferenceDiode Check forSamples: LM185-1.2-N,LM285-1.2-N,LM385-1.2-N Carefuldesign of the LM185-1.2-N has made the1FEATURES device exceptionallytolerantof capacitiveloading, 2• ±1% and 2% InitialTolerance making it easy to use in almost any reference

  • OperatingCurrentof10μA to20mA application.The wide dynamic operatingrangeallows itsuse with widelyvaryingsupplieswith excellent• 1Ω Dynamic Impedance regulation.• Low Temperature Coefficient The extremelylow power drainof the LM185-1.2-N• Low VoltageReference— 1.235V makes itusefulformicropowercircuitry.Thisvoltage• 2.5VDevice and AdjustableDevice Also referencecan be used to make portablemeters,Available regulatorsor generalpurpose analog circuitrywith
  • LM185-2.5Seriesand LM185 Series, batterylifeapproachingshelflife. respectively Further,the wide operatingcurrentallows it to replaceolderreferenceswitha tightertolerancepart.DESCRIPTION transistorsand resistors,low noise and good long termstabilityresult. CONNECTION DIAGRAM Figure1. T0-92Package (LP) (Bottom View) Figure3. SOIC Package *Pin3 isattachedtotheDieAttachPad (DAP) and shouldbe connectedtoPin2 or leftfloating. Figure2. SOT-23 Figure4. TO Package (NDV) (Bottom View) Pleasebe aware thatan importantnoticeconcerningavailability,standardwarranty,and use incriticalapplicationsof Texas Instrumentssemiconductorproductsand disclaimerstheretoappearsattheend ofthisdatasheet. 2Alltrademarksarethepropertyoftheirrespectiveowners. PRODUCTION DATA informationiscurrentas ofpublicationdate. Copyright© 2000–2013,Texas InstrumentsIncorporatedProductsconform to specificationsper the terms of the Texas Instrumentsstandardwarranty.Productionprocessingdoes not necessarilyincludetestingofallparameters.

LM185-1.2-N,LM285-1.2-N,LM385-1.2-N SNVS742E –JANUARY 2000–REVISED APRIL 2013 www.ti.com These deviceshave limitedbuilt-inESD protection.The leadsshouldbe shortedtogetherorthedeviceplacedinconductivefoam duringstorageorhandlingtopreventelectrostaticdamage totheMOS gates. ABSOLUTE MAXIMUM RATINGS (1)(2)(3) ReverseCurrent 30mA ForwardCurrent 10mA OperatingTemperatureRange (4) LM185-1.2-N −55°C to+125°C LM285-1.2-N −40°C to+85°C LM385-1.2-N 0°C to70°C ESD Susceptibility(5) 2kV StorageTemperature −55°C to+150°C SolderingInformation TO-92 package:10 sec. 260°C TO package:10sec. 300°C SOIC and SOT-23 Pkg. Vapor phase (60sec.) 215°C Infrared(15sec.) 220°C See AN-450 “SurfaceMountingMethods and TheirEffecton ProductReliability”forothermethods ofsolderingsurfacemount devices. (1) AbsoluteMaximum Ratingsindicatelimitsbeyond whichdamage tothedevicemay occur.OperatingRatingsindicateconditionsfor whichthedeviceisintendedtobe functional.Forspecificationsand testconditions,see theElectricalCharacteristics.The specifications applyonlyforthetestconditionslisted. (2) RefertoRETS185H-1.2 formilitaryspecifications. (3) IfMilitary/Aerospacespecifieddevicesarerequired,pleasecontacttheTISalesOffice/Distributorsforavailabilityand specifications. (4) Forelevatedtemperatureoperation,see Table1. (5) The human body model isa 100 pF capacitordischargedthrougha 1.5kΩ resistorintoeach pin. Table1.TJ(max) forElevatedTemperature Operation DEVICE TJ(max) (°C) LM185-1.2-N 150 LM285-1.2-N 125 LM385-1.2-N 100

2 SubmitDocumentationFeedback Copyright© 2000–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LM185-1.2-N LM285-1.2-N LM385-1.2-N

LM185-1.2-N,LM285-1.2-N,LM385-1.2-N www.ti.com SNVS742E –JANUARY 2000–REVISED APRIL 2013 ELECTRICAL CHARACTERISTICS (1) LM185-1.2-N LM185BX-1.2-N LM385B-1.2-N LM185BY-1.2-N LM385BX-1.2-N LM385-1.2-N LM285-1.2-N LM385BY-1.2-N UnitsParameter Conditions Typ LM285BX-1.2-N (Limit) LM285BY-1.2-N Tested Design Tested Design Tested Design Limit(2) Limit (4) Limit (2) Limit (4) Limit (2) Limit (4) (3) ReverseBreakdown TA = 25°C, 1.23 1.223 1.223 1.205 V(Min) Voltage 10μA ≤ IR ≤ 20mA 1.247 1.247 1.260 V(Max) Minimum Operating 8 10 20 15 20 15 20 μA Current LM385M3-1.2-N 10 15 (Max) ReverseBreakdown 10μA ≤ IR ≤ 1mA 1 1.5 1 1.5 1 1.5 mV VoltageChange with (Max)Current 1mA ≤ IR ≤ 20mA 10 20 20 25 20 25 mV (Max) ReverseDynamic IR = 100μA,f= 20Hz 1 Ω Impedance Wideband Noise IR = 100μA, 60 μV (rms) 10Hz ≤ f≤ 10kHz Long Term Stability IR = 100μA,T = 1000 Hr, 20 ppm TA = 25°C ±0.1°C AverageTemperature IR = 100μA Coefficient(5) X Suffix 30 30 ppm/°C Y Suffix 50 50 ppm/°C AllOthers 150 150 150 ppm/°C (Max) (1) Parametersidentifiedwithboldfacetypeapplyattemperatureextremes.Allothernumbers applyatTA = TJ = 25°C. (2) Productiontested. (3) A militaryRETS electricalspecificationisavailableon request. (4) Specifiedby design.Not productiontested.These limitsarenotused tocalculateaverageoutgoingqualitylevels. (5) The averagetemperaturecoefficientisdefinedas themaximum deviationofreferencevoltageatallmeasured temperaturesbetween theoperatingTMAX and TMIN ,dividedby TMAX − TMIN .The measured temperaturesare−55°C, −40°C, 0°C, 25°C, 70°C, 85°C, 125°C. THERMAL CHARACTERISTICS Thermal Resistance TO-92 TO SOIC SOT-23 180°C/W (0.4″ leads)θJA (junctiontoambient) 440°C/W 165°C/W 283°C/W170°C/W (0.125″ leads) θJC (junctiontocase) N/A 80°C/W N/A N/A Copyright© 2000–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 3 ProductFolderLinks:LM185-1.2-N LM285-1.2-N LM385-1.2-N

LM185-1.2-N,LM285-1.2-N,LM385-1.2-N SNVS742E –JANUARY 2000–REVISED APRIL 2013 www.ti.com TYPICAL PERFORMANCE CHARACTERISTICS Reverse Characteristics Reverse Characteristics Figure5. Figure6. Temperature Driftof3 Forward Characteristics RepresentativeUnits Figure7. Figure8. Reverse Dynamic Impedance Reverse Dynamic Impedance Figure9. Figure10.

4 SubmitDocumentationFeedback Copyright© 2000–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LM185-1.2-N LM285-1.2-N LM385-1.2-N

LM185-1.2-N,LM285-1.2-N,LM385-1.2-N www.ti.com SNVS742E –JANUARY 2000–REVISED APRIL 2013 TYPICAL PERFORMANCE CHARACTERISTICS (continued) Noise Voltage FilteredOutput Noise Figure11. Figure12. Response Time Figure13. Copyright© 2000–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 5 ProductFolderLinks:LM185-1.2-N LM285-1.2-N LM385-1.2-N

LM185-1.2-N,LM285-1.2-N,LM385-1.2-N SNVS742E –JANUARY 2000–REVISED APRIL 2013 www.ti.com TYPICAL APPLICATIONS Figure14.Wide InputRange Reference Figure15.Micropower Referencefrom 9V Battery Figure16.Referencefrom 1.5VBattery *IQ ≃ 30μA Figure17. Micropower* 5V Regulator

6 SubmitDocumentationFeedback Copyright© 2000–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LM185-1.2-N LM285-1.2-N LM385-1.2-N

LM185-1.2-N,LM285-1.2-N,LM385-1.2-N www.ti.com SNVS742E –JANUARY 2000–REVISED APRIL 2013 *IQ ≃20μA standbycurrent Figure18. Micropower* 10V Reference Figure19. Figure20.Precision1μA to1mA CurrentSources Copyright© 2000–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 7 ProductFolderLinks:LM185-1.2-N LM285-1.2-N LM385-1.2-N

LM185-1.2-N,LM285-1.2-N,LM385-1.2-N SNVS742E –JANUARY 2000–REVISED APRIL 2013 www.ti.com METER THERMOMETERS Calibration 1.ShortLM385-1.2-N,adjustR3 forIOUT = temp at1μA/°K 2.Remove short,adjustR2 forcorrectreadingincentigrade †IQ at1.3V≃500μA IQ at1.6V≃2.4mA Figure21. 0°C −100°C Thermometer Figure22. *2N3638 or2N2907 selectforinverseH FE ≃ 5 †Selectforoperationat1.3V ‡IQ ≃ 600μA to900μA Figure23. Lower Power Thermometer

8 SubmitDocumentationFeedback Copyright© 2000–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LM185-1.2-N LM285-1.2-N LM385-1.2-N

LM185-1.2-N,LM285-1.2-N,LM385-1.2-N www.ti.com SNVS742E –JANUARY 2000–REVISED APRIL 2013 Calibration 1.ShortLM385-1.2-N,adjustR3 forIOUT = temp at1.8μA/°K 2.Remove short,adjustR2 forcorrectreadingin°F Figure24. 0°F−50°F Thermometer Adjustment Procedure 1.AdjustTC ADJ potuntilvoltageacrossR1 equalsKelvintemperaturemultipliedby thethermocoupleSeebeck coefficient. 2.AdjustzeroADJ potuntilvoltageacrossR2 equalsthethermocoupleSeebeck coefficientmultipliedby 273.2. Figure25. Micropower Thermocouple Cold JunctionCompensator Copyright© 2000–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 9 ProductFolderLinks:LM185-1.2-N LM285-1.2-N LM385-1.2-N

LM185-1.2-N,LM285-1.2-N,LM385-1.2-N SNVS742E –JANUARY 2000–REVISED APRIL 2013 www.ti.com Thermocouple Seebeck R1 R2 Voltage Voltage Type Coefficient (Ω) (Ω) Across R1 Across R2 (μV/°C) @ 25°C (mV) (mV) J 52.3 523 1.24k 15.60 14.32 T 42.8 432 1k 12.77 11.78 K 40.8 412 953Ω 12.17 11.17 S 6.4 63.4 150Ω 1.908 1.766 Typicalsupplycurrent50μA Calibration 1.AdjustR1 so thatV1 = temp at1mV/°K 2.AdjustV2 to273.2mV †IQ for1.3Vto1.6Vbatteryvolt- age = 50μA to150μA Figure26. CentigradeThermometer

10 SubmitDocumentationFeedback Copyright© 2000–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LM185-1.2-N LM285-1.2-N LM385-1.2-N

LM185-1.2-N,LM285-1.2-N,LM385-1.2-N www.ti.com SNVS742E –JANUARY 2000–REVISED APRIL 2013 SCHEMATIC DIAGRAM Copyright© 2000–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 11 ProductFolderLinks:LM185-1.2-N LM285-1.2-N LM385-1.2-N

LM185-1.2-N,LM285-1.2-N,LM385-1.2-N SNVS742E –JANUARY 2000–REVISED APRIL 2013 www.ti.com

REVISION HISTORY

Changes from RevisionD (April2013)toRevisionE Page

12 SubmitDocumentationFeedback Copyright© 2000–2013,Texas InstrumentsIncorporated

ProductFolderLinks:LM185-1.2-N LM285-1.2-N LM385-1.2-N

www.ti.com 11-Nov-2025 PACKAGING INFORMATION Orderable part number Status (1) Material type (2) Package | Pins Package qty | Carrier RoHS (3) Lead finish/ Ball material (4) MSL rating/ Peak reflow (5) Op temp (°C) Part marking (6) LM185BYH-1.2/NOPB Active Production TO (NDU) | 2 1000 | BULK Yes SNAGCU Level-1-NA-UNLIM -55 to 125 ( LM185BYH1.2, LM1 85BYH1.2) LM185H-1.2/NOPB Active Production TO (NDU) | 2 1000 | BULK Yes SNAGCU Level-1-NA-UNLIM -55 to 125 ( LM185H1.2, LM185 H1.2) LM285BXM-1.2/NOPB Active Production SOIC (D) | 8 95 | TUBE Yes SN Level-1-260C-UNLIM -40 to 85 285BX M1.2 LM285BXM-1.2/NOPB.B Active Production SOIC (D) | 8 95 | TUBE Yes SN Level-1-260C-UNLIM -40 to 85 285BX M1.2 LM285BXMX-1.2/NOPB Active Production SOIC (D) | 8 2500 | LARGE T&R Yes SN Level-1-260C-UNLIM -40 to 85 285BX M1.2 LM285BXMX-1.2/NOPB.B Active Production SOIC (D) | 8 2500 | LARGE T&R Yes SN Level-1-260C-UNLIM -40 to 85 285BX M1.2 LM285BXZ-1.2/LFT4 Active Production TO-92 (LP) | 3 2000 | LARGE T&R Yes Call TI N/A for Pkg Type - 285BX Z-1.2 LM285BXZ-1.2/LFT4.B Active Production TO-92 (LP) | 3 2000 | LARGE T&R Yes Call TI N/A for Pkg Type -40 to 85 285BX Z-1.2 LM285BXZ-1.2/NOPB Active Production TO-92 (LP) | 3 1800 | BULK Yes Call TI N/A for Pkg Type -40 to 85 285BX Z-1.2 LM285BXZ-1.2/NOPB.B Active Production TO-92 (LP) | 3 1800 | BULK Yes Call TI N/A for Pkg Type -40 to 85 285BX Z-1.2 LM285BYM-1.2/NOPB Active Production SOIC (D) | 8 95 | TUBE Yes SN Level-1-260C-UNLIM -40 to 85 285BY M1.2 LM285BYM-1.2/NOPB.B Active Production SOIC (D) | 8 95 | TUBE Yes SN Level-1-260C-UNLIM -40 to 85 285BY M1.2 LM285BYMX-1.2/NOPB Active Production SOIC (D) | 8 2500 | LARGE T&R Yes SN Level-1-260C-UNLIM -40 to 85 285BY M1.2 LM285BYMX-1.2/NOPB.B Active Production SOIC (D) | 8 2500 | LARGE T&R Yes SN Level-1-260C-UNLIM -40 to 85 285BY M1.2 LM285M-1.2/NOPB Active Production SOIC (D) | 8 95 | TUBE Yes SN Level-1-260C-UNLIM -40 to 85 LM285 M1.2 LM285M-1.2/NOPB.B Active Production SOIC (D) | 8 95 | TUBE Yes SN Level-1-260C-UNLIM -40 to 85 LM285 M1.2 Addendum-Page 1

www.ti.com 11-Nov-2025 Orderable part number Status (1) Material type (2) Package | Pins Package qty | Carrier RoHS (3) Lead finish/ Ball material (4) MSL rating/ Peak reflow (5) Op temp (°C) Part marking (6) LM285MX-1.2/NOPB Active Production SOIC (D) | 8 2500 | LARGE T&R Yes SN Level-1-260C-UNLIM -40 to 85 LM285 M1.2 LM285MX-1.2/NOPB.B Active Production SOIC (D) | 8 2500 | LARGE T&R Yes SN Level-1-260C-UNLIM -40 to 85 LM285 M1.2 LM285Z-1.2/NOPB Active Production TO-92 (LP) | 3 1800 | BULK Yes Call TI N/A for Pkg Type -40 to 85 LM28 5Z-1.2 LM285Z-1.2/NOPB.B Active Production TO-92 (LP) | 3 1800 | BULK Yes Call TI N/A for Pkg Type -40 to 85 LM28 5Z-1.2 LM385BM-1.2/NOPB Active Production SOIC (D) | 8 95 | TUBE Yes SN Level-1-260C-UNLIM 0 to 70 LM385 BM1.2 LM385BM-1.2/NOPB.B Active Production SOIC (D) | 8 95 | TUBE Yes SN Level-1-260C-UNLIM 0 to 70 LM385 BM1.2 LM385BMX-1.2/NOPB Active Production SOIC (D) | 8 2500 | LARGE T&R Yes SN Level-1-260C-UNLIM 0 to 70 LM385 BM1.2 LM385BMX-1.2/NOPB.B Active Production SOIC (D) | 8 2500 | LARGE T&R Yes SN Level-1-260C-UNLIM 0 to 70 LM385 BM1.2 LM385BXM-1.2/NOPB Active Production SOIC (D) | 8 95 | TUBE Yes SN Level-1-260C-UNLIM 0 to 70 385BX M1.2 LM385BXM-1.2/NOPB.B Active Production SOIC (D) | 8 95 | TUBE Yes SN Level-1-260C-UNLIM 0 to 70 385BX M1.2 LM385BXMX-1.2/NOPB Active Production SOIC (D) | 8 2500 | LARGE T&R Yes SN Level-1-260C-UNLIM 0 to 70 385BX M1.2 LM385BXMX-1.2/NOPB.B Active Production SOIC (D) | 8 2500 | LARGE T&R Yes SN Level-1-260C-UNLIM 0 to 70 385BX M1.2 LM385BXZ-1.2/NOPB Active Production TO-92 (LP) | 3 1800 | BULK Yes Call TI N/A for Pkg Type 0 to 70 385BX Z-1.2 LM385BXZ-1.2/NOPB.B Active Production TO-92 (LP) | 3 1800 | BULK Yes Call TI N/A for Pkg Type 0 to 70 385BX Z-1.2 LM385BYM-1.2/NOPB Active Production SOIC (D) | 8 95 | TUBE Yes SN Level-1-260C-UNLIM 0 to 70 385BY M1.2 LM385BYM-1.2/NOPB.B Active Production SOIC (D) | 8 95 | TUBE Yes SN Level-1-260C-UNLIM 0 to 70 385BY M1.2 LM385BYMX-1.2/NOPB Active Production SOIC (D) | 8 2500 | LARGE T&R Yes SN Level-1-260C-UNLIM 0 to 70 385BY M1.2 Addendum-Page 2

www.ti.com 11-Nov-2025 Orderable part number Status (1) Material type (2) Package | Pins Package qty | Carrier RoHS (3) Lead finish/ Ball material (4) MSL rating/ Peak reflow (5) Op temp (°C) Part marking (6) LM385BYMX-1.2/NOPB.B Active Production SOIC (D) | 8 2500 | LARGE T&R Yes SN Level-1-260C-UNLIM 0 to 70 385BY M1.2 LM385BYZ-1.2/NOPB Active Production TO-92 (LP) | 3 1800 | BULK - Call TI N/A for Pkg Type 0 to 70 385BY Z-1.2 LM385BYZ-1.2/NOPB.B Active Production TO-92 (LP) | 3 1800 | BULK - Call TI N/A for Pkg Type 0 to 70 385BY Z-1.2 LM385BZ-1.2/NOPB Active Production TO-92 (LP) | 3 1800 | BULK Yes Call TI N/A for Pkg Type 0 to 70 LM385 BZ1.2 LM385BZ-1.2/NOPB.B Active Production TO-92 (LP) | 3 1800 | BULK Yes Call TI N/A for Pkg Type 0 to 70 LM385 BZ1.2 LM385M-1.2/NOPB Active Production SOIC (D) | 8 95 | TUBE Yes SN Level-1-260C-UNLIM 0 to 70 LM385 M1.2 LM385M-1.2/NOPB.B Active Production SOIC (D) | 8 95 | TUBE Yes SN Level-1-260C-UNLIM 0 to 70 LM385 M1.2 LM385M3-1.2/NOPB Active Production SOT-23 (DBZ) | 3 1000 | SMALL T&R Yes SN Level-1-260C-UNLIM 0 to 70 R11 LM385M3-1.2/NOPB.B Active Production SOT-23 (DBZ) | 3 1000 | SMALL T&R Yes SN Level-1-260C-UNLIM 0 to 70 R11 LM385M3X-1.2/NOPB Active Production SOT-23 (DBZ) | 3 3000 | LARGE T&R Yes SN Level-1-260C-UNLIM 0 to 70 R11 LM385M3X-1.2/NOPB.B Active Production SOT-23 (DBZ) | 3 3000 | LARGE T&R Yes SN Level-1-260C-UNLIM 0 to 70 R11 LM385MX-1.2/NOPB Active Production SOIC (D) | 8 2500 | LARGE T&R Yes SN Level-1-260C-UNLIM 0 to 70 LM385 M1.2 LM385MX-1.2/NOPB.B Active Production SOIC (D) | 8 2500 | LARGE T&R Yes SN Level-1-260C-UNLIM 0 to 70 LM385 M1.2 LM385Z-1.2/LFT3 Active Production TO-92 (LP) | 3 2000 | LARGE T&R Yes SN N/A for Pkg Type - LM385 Z-1.2 LM385Z-1.2/LFT3.B Active Production TO-92 (LP) | 3 2000 | LARGE T&R Yes SN N/A for Pkg Type 0 to 70 LM385 Z-1.2 LM385Z-1.2/LFT4 Active Production TO-92 (LP) | 3 2000 | LARGE T&R Yes SN N/A for Pkg Type - LM385 Z-1.2 LM385Z-1.2/LFT4.B Active Production TO-92 (LP) | 3 2000 | LARGE T&R Yes SN N/A for Pkg Type 0 to 70 LM385 Z-1.2 LM385Z-1.2/NOPB Active Production TO-92 (LP) | 3 1800 | BULK Yes Call TI N/A for Pkg Type 0 to 70 LM385 Z-1.2 LM385Z-1.2/NOPB.B Active Production TO-92 (LP) | 3 1800 | BULK Yes Call TI N/A for Pkg Type 0 to 70 LM385 Z-1.2 Addendum-Page 3

www.ti.com 11-Nov-2025 (1) Status: For more details on status, see our product life cycle. (2) Material type: When designated, preproduction parts are prototypes/experimental devices, and are not yet approved or released for full production. Testing and final process, including without limitation quality assurance, reliability performance testing, and/or process qualification, may not yet be complete, and this item is subject to further changes or possible discontinuation. If available for ordering, purchases will be subject to an additional waiver at checkout, and are intended for early internal evaluation purposes only. These items are sold without warranties of any kind. (3) RoHS values: Yes, No, RoHS Exempt. See the TI RoHS Statement for additional information and value definition. (4) Lead finish/Ball material: Parts may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two lines if the finish value exceeds the maximum column width. (5) MSL rating/Peak reflow: The moisture sensitivity level ratings and peak solder (reflow) temperatures. In the event that a part has multiple moisture sensitivity ratings, only the lowest level per JEDEC standards is shown. Refer to the shipping label for the actual reflow temperature that will be used to mount the part to the printed circuit board. (6) Part marking: There may be an additional marking, which relates to the logo, the lot trace code information, or the environmental category of the part. Multiple part markings will be inside parentheses. Only one part marking contained in parentheses and separated by a "~" will appear on a part. If a line is indented then it is a continuation of the previous line and the two combined represent the entire part marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 4

PACKAGE MATERIALS INFORMATION www.ti.com 10-Aug-2026 TAPE AND REEL INFORMATION Reel Width (W1) REEL DIMENSIONS A0B0K0WDimension designed to accommodate the component lengthDimension designed to accommodate the component thicknessOverall width of the carrier tapePitch between successive cavity centersDimension designed to accommodate the component width TAPE DIMENSIONSK0 P1B0WA0Cavity QUADRANT ASSIGNMENTS FOR PIN 1 ORIENTATION IN TAPE Pocket QuadrantsSprocket HolesQ1Q1Q2Q2Q3Q3Q4Q4User Direction of Feed P1ReelDiameter *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant Pack Materials-Page 1

PACKAGE MATERIALS INFORMATION www.ti.com 10-Aug-2026 TAPE AND REEL BOX DIMENSIONS Width (mm) W LH *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM285BXMX-1.2/NOPB SOIC D 8 2500 367.0 367.0 35.0 LM285BYMX-1.2/NOPB SOIC D 8 2500 367.0 367.0 35.0 LM285MX-1.2/NOPB SOIC D 8 2500 367.0 367.0 35.0 LM385BMX-1.2/NOPB SOIC D 8 2500 367.0 367.0 35.0 LM385BXMX-1.2/NOPB SOIC D 8 2500 367.0 367.0 35.0 LM385BYMX-1.2/NOPB SOIC D 8 2500 367.0 367.0 35.0 LM385M3-1.2/NOPB SOT-23 DBZ 3 1000 208.0 191.0 35.0 LM385M3X-1.2/NOPB SOT-23 DBZ 3 3000 208.0 191.0 35.0 LM385MX-1.2/NOPB SOIC D 8 2500 367.0 367.0 35.0 Pack Materials-Page 2

PACKAGE MATERIALS INFORMATION www.ti.com 10-Aug-2026 TUBE L - Tube length T - Tube height W - Tube width B - Alignment groove width *All dimensions are nominal Device Package Name Package Type Pins SPQ L (mm) W (mm) T (µm) B (mm) LM285BXM-1.2/NOPB D SOIC 8 95 495 8 4064 3.05 LM285BXM-1.2/NOPB.B D SOIC 8 95 495 8 4064 3.05 LM285BYM-1.2/NOPB D SOIC 8 95 495 8 4064 3.05 LM285BYM-1.2/NOPB.B D SOIC 8 95 495 8 4064 3.05 LM285M-1.2/NOPB D SOIC 8 95 495 8 4064 3.05 LM285M-1.2/NOPB.B D SOIC 8 95 495 8 4064 3.05 LM385BM-1.2/NOPB D SOIC 8 95 495 8 4064 3.05 LM385BM-1.2/NOPB.B D SOIC 8 95 495 8 4064 3.05 LM385BXM-1.2/NOPB D SOIC 8 95 495 8 4064 3.05 LM385BXM-1.2/NOPB.B D SOIC 8 95 495 8 4064 3.05 LM385BYM-1.2/NOPB D SOIC 8 95 495 8 4064 3.05 LM385BYM-1.2/NOPB.B D SOIC 8 95 495 8 4064 3.05 LM385M-1.2/NOPB D SOIC 8 95 495 8 4064 3.05 LM385M-1.2/NOPB.B D SOIC 8 95 495 8 4064 3.05 Pack Materials-Page 3

www.ti.com PACKAGE OUTLINE .100 [2.54] .500 MIN [12.7] .080-.105 [2.03-2.67] .030 MAX [0.76] UNCONTROLLED LEAD DIA .025[0.64] MAX (MIL/AERO) .055[1.397] MAX (COMMERCIAL) .214 .005 [5.44 0.12] .041 .005 [1.04 0.12] .038 .010 [0.97 0.25] .0175 .0015 TYP [0.445 0.038] .187 .008 [4.75 0.2] 4214762/B 09/2024 TO-CAN - 2.67 mm max heightNDU0002A TRANSISTOR OUTLINE NOTES: 1. Linear dimensions are in inches [millimeters]. Dimensions in parenthesis are for reference only. Controlling dimensions are in inches. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. SEATING PLANE

www.ti.com PACKAGE OUTLINE C 0.20

0.08 TYP

0.25 2.64 2.10

1.12 MAX

0.10

0.01 TYP

3X 0.5 0.3 0.6

0.2 TYP

1.9 0.95 0 -8 TYP 4X 0 -15 4X 4 -15 A 3.04 2.80 B1.4 1.2 (0.95) (0.15) (0.125) SOT-23 - 1.12 mm max heightDBZ0003A SMALL OUTLINE TRANSISTOR 4214838/F 08/2024 NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. Reference JEDEC registration TO-236, except minimum foot length. 4. Support pin may differ or may not be present. 5. Body dimensions do not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed 0.25mm per side

0.2 C A B

0.1 C SCALE 4.000

www.ti.com EXAMPLE BOARD LAYOUT

0.07 MAX

0.07 MIN

3X (1.3) 3X (0.6) (2.1) 2X (0.95) (R0.05) TYP 4214838/F 08/2024 SOT-23 - 1.12 mm max heightDBZ0003A SMALL OUTLINE TRANSISTOR NOTES: (continued) 5. Publication IPC-7351 may have alternate designs. 6. Solder mask tolerances between and around signal pads can vary based on board fabrication site. SYMM LAND PATTERN EXAMPLE SCALE:15X PKG SOLDER MASK OPENING METAL UNDER SOLDER MASK SOLDER MASK DEFINED METALSOLDER MASK OPENING NON SOLDER MASK DEFINED (PREFERRED) SOLDER MASK DETAILS

www.ti.com EXAMPLE STENCIL DESIGN (2.1) 2X(0.95) 3X (1.3) 3X (0.6) (R0.05) TYP SOT-23 - 1.12 mm max heightDBZ0003A SMALL OUTLINE TRANSISTOR 4214838/F 08/2024 NOTES: (continued) 7. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 8. Board assembly site may have different recommendations for stencil design. SOLDER PASTE EXAMPLE BASED ON 0.125 THICK STENCIL SCALE:15X SYMM PKG

www.ti.com PACKAGE OUTLINE C .228-.244 TYP [5.80-6.19] .069 MAX [1.75] 6X .050 [1.27] 8X .012-.020 [0.31-0.51] .150 [3.81] .005-.010 TYP [0.13-0.25] 0 - 8 .004-.010 [0.11-0.25] .010 [0.25].016-.050 [0.41-1.27] 4X (0 -15 ) A .189-.197 [4.81-5.00] NOTE 3 B .150-.157 [3.81-3.98] NOTE 4 4X (0 -15 ) (.041) [1.04] SOIC - 1.75 mm max heightD0008A SMALL OUTLINE INTEGRATED CIRCUIT 4214825/C 02/2019 NOTES: 1. Linear dimensions are in inches [millimeters]. Dimensions in parenthesis are for reference only. Controlling dimensions are in inches. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed .006 [0.15] per side. 4. This dimension does not include interlead flash. 5. Reference JEDEC registration MS-012, variation AA. 1 8 .010 [0.25] C A B PIN 1 ID AREA SEATING PLANE .004 [0.1] C SEE DETAIL A DETAIL A TYPICAL SCALE 2.800

www.ti.com EXAMPLE BOARD LAYOUT .0028 MAX [0.07] ALL AROUND .0028 MIN [0.07] ALL AROUND (.213) [5.4] 6X (.050 ) [1.27] 8X (.061 ) [1.55] 8X (.024) [0.6] (R.002 ) TYP [0.05] SOIC - 1.75 mm max heightD0008A SMALL OUTLINE INTEGRATED CIRCUIT 4214825/C 02/2019 NOTES: (continued) 6. Publication IPC-7351 may have alternate designs. 7. Solder mask tolerances between and around signal pads can vary based on board fabrication site. METAL SOLDER MASK OPENING NON SOLDER MASK DEFINED SOLDER MASK DETAILS EXPOSED METAL OPENING SOLDER MASK METAL UNDER SOLDER MASK SOLDER MASK DEFINED EXPOSED METAL LAND PATTERN EXAMPLE EXPOSED METAL SHOWN SCALE:8X SYMM 4 5 SEE DETAILS SYMM

www.ti.com EXAMPLE STENCIL DESIGN 8X (.061 ) [1.55] 8X (.024) [0.6] 6X (.050 ) [1.27] (.213) [5.4] (R.002 ) TYP [0.05] SOIC - 1.75 mm max heightD0008A SMALL OUTLINE INTEGRATED CIRCUIT 4214825/C 02/2019 NOTES: (continued) 8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 9. Board assembly site may have different recommendations for stencil design. SOLDER PASTE EXAMPLE BASED ON .005 INCH [0.125 MM] THICK STENCIL SCALE:8X SYMM SYMM 4 5

www.ti.com PACKAGE OUTLINE 3X 2.67 2.03 5.21 4.44 5.34 4.32

12.7 MIN

2X 1.27 0.13 3X 0.55 0.38 4.19 3.17

3.43 MIN

3X 0.43 0.35 (2.54) NOTE 3 2X 2.9 2.4

4 MAX

0.076 MAX

(0.51) TYP (1.5) TYP TO-92 - 5.34 mm max heightLP0003A TO-92 4215214/C 04/2025 NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. Lead dimensions are not controlled within this area. 4. Reference JEDEC TO-226, variation AA. 5. Shipping method: a. Straight lead option available in bulk pack only. b. Formed lead option available in tape and reel or ammo pack. c. Specific products can be offered in limited combinations of shipping medium and lead options. d. Consult product folder for more information on available options. EJECTOR PIN OPTIONAL PLANE SEATING STRAIGHT LEAD OPTION 3 2 1 SCALE 1.200 FORMED LEAD OPTION OTHER DIMENSIONS IDENTICAL TO STRAIGHT LEAD OPTION SCALE 1.200

www.ti.com EXAMPLE BOARD LAYOUT

0.05 MAX

(1.07) (1.5) 2X (1.5) 2X (1.07) (1.27) (2.54) FULL R TYP ( 1.4)0.05 MAX ALL AROUND TYP (2.6) (5.2) (R0.05) TYP 3X ( 0.9) HOLE 2X ( 1.4) METAL 3X ( 0.85) HOLE (R0.05) TYP 4215214/C 04/2025 TO-92 - 5.34 mm max heightLP0003A TO-92 LAND PATTERN EXAMPLE FORMED LEAD OPTION NON-SOLDER MASK DEFINED SCALE:15X SOLDER MASK OPENING METAL SOLDER MASK OPENING 1 2 3 LAND PATTERN EXAMPLE STRAIGHT LEAD OPTION NON-SOLDER MASK DEFINED SCALE:15X METAL TYP SOLDER MASK OPENING SOLDER MASK OPENING METAL 1 2 3

www.ti.com TAPE SPECIFICATIONS 19.0 17.5 13.7 11.7 11.0 8.5

0.5 MIN

3.7-4.3 TYP 9.75 8.50 2.9

2.4 TYP

6.75 5.95 13.0 12.4 (2.5) TYP 16.5 15.5 4215214/C 04/2025 TO-92 - 5.34 mm max heightLP0003A TO-92 FOR FORMED LEAD OPTION PACKAGE

IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, regulatory or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you fully indemnify TI and its representatives against any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale, TI’s General Quality Guidelines, or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Unless TI explicitly designates a product as custom or customer-specified, TI products are standard, catalog, general purpose devices. TI objects to and rejects any additional or different terms you may propose. IMPORTANT NOTICE Copyright © 2026, Texas Instruments Incorporated Last updated 10/2025